Question about 2001 Chevrolet S-10

1 Answer

Door panel I need to know how to get the window crank off so I can remove the door panel

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

This door crank removal tool is required


door panel - a7af7ca.jpg

You slip it behind the handle (and plastic disc) to dislodge this clip


If it was never taken off, the tool goes under the handle to remove the clip

Posted on Jan 20, 2009

6 Suggested Answers

MrScary66613
  • 1990 Answers

SOURCE: need to remove window crank 2004 hyundai accent

Your Local Auto Parts Store has the Tool that you need for this Removal. Some of them will let you Rent it instaed of paying the 50.00 Bucks for the Tool.

Posted on Jan 24, 2009

  • 508 Answers

SOURCE: trying to remove the door

Push the door panel in gently and there will be a clip behind the window crank handle. Remove the clip and the window crank will come off the splined shaft. The clip will be in a half circle around the spline shaft.

Posted on Feb 17, 2009

  • 75 Answers

SOURCE: remove inside door panel without breaking it

they have push in clips that hold the panel on the door you can pull it off with your hand or go to parts store and buy a door panel removal tool
PLS take time to rate this solution and by the way you will probably need to buy new push in clips to hold panel on

Posted on Feb 17, 2009

motor1258
  • 6674 Answers

SOURCE: Removing window crank

Push in on door panel as suggested & you may have to spin handle or tool, then feel it slide in to right spot (slot cut) & push tool & handle should release

Posted on Apr 11, 2009

motor1258
  • 6674 Answers

SOURCE: Remove door panel on 2000 Neon. Window crank removal?

If no screws in center, then there will be a clip in behind that is hard to see & remove, unless you stop at autoparts store & buy one.

Posted on Apr 19, 2009

  • 1986 Answers

SOURCE: learn to remove front door panel to access window

You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Posted on Aug 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I get the window crank off?


there is a clip between the door panel and the crank handle realy hard to see you can use a long flat skinney screw driver on the end of the clip to push it off

Aug 20, 2012 | 1999 Saturn SL

2 Answers

Door panel removal


To remove the window crank slip a small standard screwdriver behind where the crank mounts to the door.There is a small spring like c-clip pop the clip off and cran Window Handle Operation:
00457_window_handles.jpgReplacement handle for cranking or rolling a side or rear window up or down. It slides over the window crankshaft and uses splines to match the window crank shaft splines as to avoid slippage. It's held in place with a simple spring clip and come in a variety of styles and colors.k will come off.

Jun 27, 2012 | 1994 Suzuki Swift

1 Answer

How do you remove passenger sliding door handle on oldsmobile silhouitte


The process of removing car door panels is essentially the same for each make of car. You may need to remove these panels when your fixing locks or power windows, replacing window cranks, installing speakers or replacing the side mirrors. Learning how to remove the panels yourself can save money on simple car repairs.
Related Searches:

Difficulty: Moderately EasyInstructionsThings You'll Need
  • Set of screwdrivers
  • L pick
  • Small flashlight
  • Ratchet and socket
    • 1

      Check out how the door panels are attached to the car. Most panels use screws and bolts but others have snap-in fittings. Gather all the tools you need for removing the door panels. If the panel is attached with screws and bolts, you need a screwdriver or ratchet and socket. Car door panels with snap-in fittings are easily removed with a flathead screwdriver.

    • 2

      Locate where the screws and bolts are before starting. These are usually found in the arm rest area, along the bottom or sometimes near the door lights.

    • 3

      Roll down the car door window. Begin removing all screws and bolts that hold the door panel onto the car. If your car has snap-in fittings, pry gently on the bottom corner of the door panel until the fittings pop out.

    • 4

      Remove the power window control panel if your car has power windows. The control panel should pry out easily, and then you unplug the wiring harness from the back and place it to the side.

    • 5

      Use an L pick and flashlight when locating a manual window crank. Look behind the window crank and slide the pick under the edge of the metal clip that holds the crank in place. Remove the clip and pull the crank off.

    • 6

      Remove the door handle by unscrewing the small screw located in the center. Gently pull the door handle out until you see the back of the handle and unclip the rod from the door handle. This should remove the handle unless the handle and door lock are attached, then you just unclip the rod from the lock and remove them both together.

    • 7

      Unscrew the cap off rear upper corner door panel locks. These don't have a rod attaching them to the handle and unscrew separately from the door handle.

    • 8

      Pop the door panel off after you've removed everything. Gently pry on the bottom edge of the door panel until it releases. Pull out and up to completely remove the door panel.

Jan 10, 2012 | 1998 Oldsmobile Silhouette

1 Answer

Need to know the proper way to tack off the rear door panel on my 2009 1500 dodge truck so I can put new speakers in


1426215.jpg 1. Using trim stick C-4755 or equivalent, release the door switch/bezel (1) from the door trim and disconnect the electrical connectors (2).


1426183.jpg 2. Using trim stick C-4755 or equivalent, release the upper trim bezel (1).


178637.jpg 3. If equipped, remove the manual window crank (1) using a window crank removal tool (2).


1426196.jpg 4. Remove the screw (3) and remove the interior handle bezel (5). 5. Release the plastic screw/rivets (4). 6. Raise the trim panel (2) up and off the hooks and door lock knob (1).

Apr 22, 2011 | Dodge Ram 1500 Cars & Trucks

1 Answer

How do i remove the inside driver door panel to a 99 saturn sl1 with crank windows my window is stuck down and i cant get the window crank off


the best part about having a Saturn is that you don't need to. have a look and your going to remove the outside panel around the door. the one that's painted the color of the car. the panels in thees are easily replaced and removed and this will allow access to windows. (kinda crazy and different than any other make but Saturn knows what makes seance and did it well.

Nov 17, 2010 | 1999 Saturn SL

1 Answer

Need a diagram of how the door panel comes off of a 95 chevy blazer. I need to remove the door panel to fix the lock assembly. Need to know if there are clips at the bottom of the door, or just the screws.


There will always be clips attached to the panel from the inside-after screw removal and window crank removal (window crank on mostly earlier models) You can start at a bottom edge with what i recommend a door panel removal tool-most auto parts store carry these. even if a clip falls out you can reinsert it.Also the door removel tool doubles as a window crank clip remover.

Sep 20, 2009 | 1995 Chevrolet Blazer

1 Answer

How to remove door panel for driver and passenger side doors


Hi. This Guide will help you with this issue.



Step1 Check out how the door panels are attached to the car. Most panels use screws and bolts but others have snap-in fittings. Gather all the tools you need for removing the door panels. If the panel is attached with screws and bolts, you need a screwdriver or ratchet and socket. Car door panels with snap-in fittings are easily removed with a flathead screwdriver. Step2 Locate where the screws and bolts are before starting. These are usually found in the arm rest area, along the bottom or sometimes near the door lights. Step3 Roll down the car door window. Begin removing all screws and bolts that hold the door panel onto the car. If your car has snap-in fittings, pry gently on the bottom corner of the door panel until the fittings pop out. Step4 Remove the power window control panel if your car has power windows. The control panel should pry out easily, and then you unplug the wiring harness from the back and place it to the side. Step5 Use an L pick and flashlight when locating a manual window crank. Look behind the window crank and slide the pick under the edge of the metal clip that holds the crank in place. Remove the clip and pull the crank off. Step6 Remove the door handle by unscrewing the small screw located in the center. Gently pull the door handle out until you see the back of the handle and unclip the rod from the door handle. This should remove the handle unless the handle and door lockmag-glass_10x10.gif are attached, then you just unclip the rod from the lock and remove them both together. Step7 Unscrew the cap off rear upper corner door panel locks. These don't have a rod attaching them to the handle and unscrew separately from the door handle. Step8 Pop the door panel off after you've removed everything. Gently pry on the bottom edge of the door panel until it releases. Pull out and up to completely remove the door panel.


Please rate and have a great day:)

Mar 25, 2009 | 2002 Kia Optima

1 Answer

Replace door handle and lock 08 dodge charger


check that all screws have been removed from door. Hidden screws often found behind reflectors in door. Use prying tool and gently pull bottom of door panel away from doorm on/in door handle and near mirrow within door jam. Lay on the ground and look between the door and panle. You can usually see the plastic clips holding the door in place. Once bottom is loose you should be able to lift the door up and off of the door. Watch for power window and lock wires when removing. If manual windows, slide a rag behind window crank and move back and forth to remoce clip which holds crank on.

Jan 02, 2009 | 2008 Dodge Charger

1 Answer

1997 Sunfire


you need to get a door and door panel removal tool. Once you have removed the crank there is a couple of screws on the door arm rest..remove them and using the door panel removal tool..remove the door panel. you may have to lift up on the panel to remove it...

Oct 20, 2008 | 1997 Pontiac Sunfire

1 Answer

Trying to remove the door panel to get to the lock mechanism but dont know how to remove the window crank handle


Push the door panel in gently and there will be a clip behind the window crank handle. Remove the clip and the window crank will come off the splined shaft. The clip will be in a half circle around the spline shaft.

Jul 25, 2008 | Jeep Wrangler Cars & Trucks

Not finding what you are looking for?
2001 Chevrolet S-10 Logo

Related Topics:

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...