Question about 2009 Mitsubishi Outlander

Open Question

I have a 2009 Mitsubishi Outlander 2wd and the ABS sensor is blinking while driving. Last year I just followed our dealer service advisor to replace the front right sensor . Now it is the left rear speed sensor. Does this really breakdown after 3 yrs and 42KM only..

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 1201 Answers

SOURCE: reset service light

A 2009?????? It should be under warranty, take to the dealer.

Posted on Mar 17, 2009

  • 333 Answers

SOURCE: mitsubishi outlander cooling fans not operating

There is a Recall to replace your cooling fan module because of this concern.

Open your hood and look at the black box bolted to your radiator fan by the battery. If it does not have a green dot on it, you have not had the replacement fan module installed.

Contact your local dealer with your VIN handy to verify the recall has not been done and to schedule an appointment.

If the recall has been done, verify if you have power coming out of the module to the fans, as the fans do burn out eventually.... but rarely both at once.

Posted on Sep 10, 2009

  • 1 Answer

SOURCE: mitsubishi lancer service engine light comes on and rpm's high

same as mine
2000 Lancer cedia

Posted on Oct 19, 2009

  • 48 Answers

SOURCE: Front weel lights on the instrument panel blinks all time

Its NOT a problem at all, The vehicle WILL be in 2WD if the Lever is in the 2WD position, To sort this problem reverse in the vehicle in 2WD for about 10m. if the light do not go out, the Vaccum Solinoid is more that likley kaput. As the 2WD system works off Vacuum, the Solinoid can be found under the Fuse Box in the engine Compartment, It has a load of Rubber Pipes coming off it, with blue and yellow dots on. As i said, this is NOT a problem, i have an L400 and mine was flashing for about a year before i got a new Solinoid, Off E-bay.

Posted on Jul 30, 2010

  • 2841 Answers

SOURCE: How difficult is it to

Shocks are simple to remove and reinstall. One bolt on top and one on the bottom. You can easily do this at your home garage. However struts are a different matter. I suggest you have them replace by a professional.

Posted on Aug 22, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Tires changed and now 4wd lock flashing

Did you have same size tires put on ? With the light flashing there is a DTC'S - diagnostic trouble code stored , have to have diagnostic tool hooked up . That's the only way your going find out what the problem is .

Jan 16, 2013 | 2007 Mitsubishi Outlander XLS

1 Answer

ABS warning light on

From what I can tell with the information you provided, this lamp will be illuminated when the automatic transmission fluid temperature is excessive.

Also without knowing which engine you have, (apparently each one comes with it's own problem with this light) I would advise you to swing into your dealer and just ask them to take a glance at it. It could simply be that the brakes need replacing, or even or more likely the abs sensor is wearing out.

In the owners manual, they should discuss the exact process to reset the light. it may not reset if you hold button for 10 seconds, when they say hold for 5 seconds. So, if you think that is not the case and you have correctly attempted to reset the light, stop by your dealer.

Good Luck and Happy Motoring

Hey Dont Shoot The Messenger

Mar 03, 2012 | 2009 Mitsubishi Outlander

1 Answer

ABS show needs service

A fault has been detected. The best way to find out what it is would be to hook up a shop scanner. It may just be soemthing simple like a wheel sensor but a scanner would show the data that all the sensors are putting out and comparisons and test can be done.

Sep 27, 2011 | 2009 Mitsubishi Outlander

1 Answer

4wd light keeps flashing on 2003 mitsubishi challenger

Hi Adstew,
the front diff has a sensor telling the control unit it when it is engaged (or not). It probably is, and it won't disengage. or the sensor is stuck. The selector lever tells the control unit you want 2WD but the sensor thinks the front axle is engaged. So it flashes.
When shifting to 2WD, normally the front axle will come free after a load change or a bit of turning the steering from side to side, but it sometimes happens that it gets stuck. You can find out:
lift the car free off ground, then select drive forward in 2WD. If the front wheels do not turn, then the sensor may be faulty or stuck. if the front wheels turn in 2WD mode, the diff is stuck and the sensor tells you so. Same or similar problem can happen with the center diff, by the way, on pajero/montero, etc.
Winfried, the perfessa

Jan 18, 2010 | 2003 Mitsubishi Outlander

1 Answer

How do you secure the roof rack crossbars on a 2009 outlander?

I mounted the dealer crossbars onto my 2010 Mitsu Outlander. The drag noise is VERY loud. It sounds like I have a window open and worse they whistle as well. Any ideas how to fix this?

Sep 23, 2009 | 2009 Mitsubishi Outlander

2 Answers

Where is the water pump located on a mitsubishi 2.4L engine? I have a 2003 mitsubishi outlander

While I understand this answer may be overkill, follow this link to an article about the engine cooling system. Look midway down the article for this sentence "More information about 2003 Mitsubishi Outlander Engine Cooling System service and troubleshooting, find here – 32 pages of PDF filetype" Click on the "find here" link which will prompt you to download a file 14_rar. Open it with any decompressing software (Winzip, WinRar) to find 14.pdf. Go to page 14-23 to see a diagram of where water pump is. It will also give you instructions on removing and replacing it. Good luck!

Sep 19, 2009 | 2003 Mitsubishi Outlander

2 Answers

Reset service light

A 2009?????? It should be under warranty, take to the dealer.

Mar 17, 2009 | 2009 Mitsubishi Outlander

2 Answers

ABS light on and 4x4 light is blinking

Have someone check the wheel speed sensors. One is probably bad and not sending data to the computer. This will shut off your ABS system and all-wheel drive, because the system can't read the speed of one of your wheels. It needs input from all 4 wheels for the systems to work.

Dec 07, 2008 | 2005 Ford Escape

Not finding what you are looking for?
2009 Mitsubishi Outlander Logo

Related Topics:

263 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts


Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides