Question about 1997 Acura CL

Open Question

How to replace heat/ac blower motor of 1997 acura 3.0 CL

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
keemo68
  • 1263 Answers

SOURCE: blower motor for a 1997 acura tl

one of 2 places either under the dash behind the glove box or under the hood on the passengerside. first i would check the fuse and or fan motor relay. these are located in the box under the hood or under the dash on the drivers side. also i would check the reostat which controls the fan speed this is located near the motor and is held in place by 2 screws and has 2 wires hooked to it. one more thing to check is to make sure the switch is still good

Posted on Aug 29, 2008

Ad
tony chavous
  • 50 Answers

SOURCE: Find oil filter in engine of acura CL

back side of block under intake if its a 2.2 or a 2.3 if its a 3.0 its on the passenger side of engine bay if you turn the wheel you will be looking at it

Posted on Feb 03, 2009

motor1258
  • 6674 Answers

SOURCE: were is blower motor 1997 acura tl 3.2?

Check this link. May change your mind.

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528008be4b

Posted on Mar 06, 2009

  • 2 Answers

SOURCE: SRS light on 1997 acura CL

1.bend a paperclip into a u shape. 2.disconnect the yellow plug in your fuse box under the steering wheel and insert the paperclip into the plug that is now hanging there to complete the circuit.3.turn the ignition on and the srs light will stay on for 6 seconds, then turn off.disconnect the paperclip within 4 seconds after that and the light will come back on.4. reconnect the paperclip within 4 seconds and the srs light will turn off again.5.within another 4 seconds of it going off, disconnect the paperclip and the light will blink letting you know that you have completed all the steps right. you can also use some speaker wire

Posted on Mar 20, 2009

  • 7 Answers

SOURCE: replacement of battery 1997 acura cl. Will I lose

There is a product you can purchase that plugs into your cigarette lighter which you attach a 9 volt battery to that will save your car's memory while you change your battery. Not only radio codes, but all on board car computer codes. It will run you about 10 bucks. Here's an example
http://www.amazon.com/CTA-Tools-Computer-Memory-Saver/dp/B000GKD5Q0

Posted on Jun 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 Acura CL blower don't blow hard motor and resistor are brand new


Do you have a cabin air filter? If so it may be clogged with dirt and that severely restricts airflow in the AC and heater.

Jun 25, 2016 | Acura Cars & Trucks

1 Answer

O2 sensor po135


Replace sensor

Jul 02, 2014 | 1997 Acura CL

1 Answer

Loses power when i accelerate


a 97 Acura Vauxhall,
is this a motor swap?
quote;
Problem with 1997 Acura CL Loses power when i accelerate

Nov 26, 2013 | 1997 Acura CL

1 Answer

I have a 1997 acura cl 3.0 everytime i turn off my car the cooling fan stays on for quite awhile


The cooling fan is controlled by a heat sensor and operates independently of the motor. When you turn off your Acura, the cooling fan continues to run until the sensor determines the tempurature has decreased enough to turn off the fan

Dec 24, 2012 | 1998 Acura CL

1 Answer

I need a diagram of the AC system (specifically the location of the compressor and the condenser) for my 97 Acura 2.2 CL.


The compressor should be between the radiator and the motor, down toward the bottom of the motor, there is a large line and a smaller line connected to it. The condenser is in front of the radiator.

May 11, 2010 | 1997 Acura CL

1 Answer

Acura cl seat goes forward but not back


you could have a broken wire or a bad seat motor.

Jul 12, 2009 | 1997 Acura CL

1 Answer

A/C Blower Motor Removal/ Reinstall


If you take a look above the front passenger foot well you will likely get a look at the blower motor. (there might be a hush panel covering it, this will need to be removed first) There will be 3-4 screws securing the motor and one two wire connection.

It is fairly common for debris and even small animals to find their way into the HVAC system of many cars, especially those that sit for extended periods.

Apr 17, 2009 | 1997 Acura CL

Not finding what you are looking for?
1997 Acura CL Logo

Related Topics:

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...