Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The engine is a 200 CID straight six, the firing order is 153624...
Just pop the distributor cap and have someone crank the engine while you watch the rotor.
How I can determine which hole in the distributor is assigned to the #1 plug wire.
Pull the number one plug. Turn the engine over slowly (with a wrench) while holding your finger over the plug hole. When the air builds (a lot of) pressure you are coming up to the number one spot on the distributor. (the rotor will point to the location of the #1 hole in the distributor.)
Quick methods to disable the engine I have seen people do on the classics:
Close the points by loosening the set screw
Pull the rotor cap
Connect a wire from the coil to ground. (effectively closes the points. Can damage the coil if key is left on.)
Pull the main ignition wire
And there are some tricks at the starter solonoid involving the ballast resistor bypass that is used to provide a hotter spark while cranking. (Two little wires at the starter solonoid - one is crank the other is the ballast bypass.)
Might give those a look-see. Best of luck (rememeber rated this help).
Posted on May 17, 2010
Testimonial: "This has been very helpful!! Thank you!"
Tips for a great answer:
Apr 15, 2010 | Ford Thunderbird Cars & Trucks
Sep 21, 2009 | Ford Thunderbird Cars & Trucks
Sep 03, 2009 | 1966 Ford Mustang
Jul 11, 2009 | 1966 Ford Mustang
May 28, 2009 | 2006 Ford Taurus
Apr 24, 2009 | Ford LTD Cars & Trucks
Mar 11, 2009 | 1966 Ford Mustang
30 people viewed this question
Usually answered in minutes!