Question about 1995 Toyota 4Runner

2 Answers

Toyota timing belt

Im going to repace timing belt on 1995 toyota 4 runner 3.0 v6 interference engine i need a diagram or details on how to position?thank you

Posted by on

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I just did mine last month. same year & eng. you should have a Chilton repair manual, but... The cams R marked. the marks go straight up on each. the crank has to be on TDC on compression stroke. put #1 piston up (front pass side) & feel for air pressure coming out with your finger to assure its on compression stroke. as you apply the belt, w/ the tentioner off, the cam marks will move out a hair & no longer be ligned up with the marks on the timimg cover backing plate. they will each be off about 1/8 away from the marks on the backing plate. some belts are marked with white lines that line up w/ marks on the pulleys. 610-905-4257 Barry

Posted on Jan 31, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 54 Answers

Your best bet is to either consult a repair manual or complete r+r steps for that engine; It not as simple as it seems you percieve it to be. I dont think all the steps in the process can be posted in this little box . GL

Posted on Jan 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1995 toyota camry If timing belt broke while I was driving what damage was caused?


Whether 4-cyl or V6 there should not have been any, as these are non-interference engines, that is, the pistons do not hit the valves when timing fails. The engine just stops.

Sep 04, 2012 | Toyota Camry Cars & Trucks

3 Answers

Hello need info on how many oil liters do I need for the oil change toyota 4 runner V6


this toyota 4 runner takes 5.2 liters of oil and the correct oil is 5W 30 motor oil. hope this helps.

Jun 18, 2010 | 2004 Toyota 4Runner

1 Answer

Camry timing belt


Both the 2.2 Liter 4 cylinder and the 3.0 Liter V6 have a cam belt that must be replaced every 60,000 miles. The cam belt also drives the water pump and for this reason I recommend you replace the cam belt at 120,000 miles when you replace the cam belt the second time. Neither engine is an interference engine.

Jun 16, 2010 | 1995 Toyota Camry

1 Answer

Timing belt diagram the timing belt came off timing


Click on the following free, direct Link. I realize the Link has "4 Runner, but the 4-Runner and PreRunner have the exact same Engines (2.7L & 3.4L).
The Link has the Timing Belt Diagrams for your 1999 Toyota PreRunner for either the 2.7L DOHC In-Line 4-Cylinder or 3.4L DOHC V6 Engines; including Marks and Instructional Diagrams.

Let me know if this helped...


http://www.2carpros.com/car_repair_information/year/1999/make/toyota/model/4runner/1999_toyota_4runner_timing_belt_diagram_marks.htm

Apr 12, 2010 | 1999 Toyota Tacoma PreRunner

1 Answer

95 V6. Changed the timing belt with the cams lined up on the TDC notches. After rotating the engine two revolutions with a wrench, it ran, but the timing is obviously off. The notch on the crankshaft...


Click on the following free direct Link. It has the Timing: Belt and Mark Diagrams for your 1995 Nissan Pickup. Plus additional Instructional and Directional Diagrams.

You need to be very careful: Rotating the Engine with a Interference Engine will cause Valve Damage if not done properly.

Make sure you do not use the Trapezoid/Square Knotched Belts with Round Type Sprockets nor Round Knotched Type Belts with Trapezoid/Square Sprockets.

The Mark you are looking for is on the Engine Casing Lip, The Diagram on this Link should help you at least "quesstimate" if you still cannot find it.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1995/make/nissan/model/pickup/1995_nissan_pickup_timing_belt_diagram_marks.htm

Feb 18, 2010 | 1995 Nissan Pickup

2 Answers

Broken Timing belt


this is an interference motor, if cranked the valves will come into contact with the piston and cause major damage. Its very possible that valves may have bent(worst case). Have the belt replaced and engine pressure tested. Hopefully its not the worst case.

Aug 15, 2009 | 1995 Nissan Pickup

2 Answers

If the timing belt goes is the motor gone? on a 1995 camry


Most times when the timing belt goes it results in bending a couple of the inlet valves because the pistons are coming up as the valves are going down.

Worst case is that the valves punch holes in the piston crowns

You should remove the rocker box covers and camshafts to check that all of the valve stems can be moved or more to the point all come back up to sit at the same level proving that they are travelling straight in the valve guides.

If any of them fail to sit level they are not seating on the valve face and the engine will not run anyway, in that case you will need to take the head or heads off to do a manual inspection.

Jun 03, 2009 | 1995 Toyota Camry

1 Answer

I need a diagram of the timming belt.It would line up correctly.


You need to offset (back it up counterclockwise) the cam gear on the right (passenger) side of the engine by "one tooth" before engaging the belt tensioner. I've personally been through this issue several times. Once you have it offset, engage you belt tensioner, and you gears will align properly.

I hope this information helps you, and I wish you luck on your repair.

Apr 16, 2009 | 1995 Toyota 4Runner

1 Answer

Unable to locate spark plugs on a 1995 toyota 4 runner


They are probably under some piece of plastic. All cars have them so just be patient and keep looking.

Dec 08, 2008 | 1995 Toyota 4Runner

1 Answer

Timing belt


Non interference motor; all 95 Toyotas with belts are non-interference motors.

Oct 21, 2008 | 1995 Toyota Celica

Not finding what you are looking for?
1995 Toyota 4Runner Logo

642 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6879 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...