Question about Toyota Matrix
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
first locate the washer tank, remove the bolts that are holding it. remove the wire to the motor, remove the hose that is attached to the motor, slowly pull the motor off the rubber gasket .
do the reverse in installing a new one.
tnx 4 using fixya,
Posted on Sep 01, 2008
You must remove from it's mount and empty out any fluids that is in tank.fill the tank with water and locate where the leak is coming from. wash tank a few times and the let dry upside down. Get some sand paper (80 grit course) and sand area where leak is, clean area with a vacume or clean rag.you can buy a 2 stage epoxy that comes in an injection form and squeeze it out on a pc of paper and then get a q-tip and mix the 2 components together, fill the crack or hole generously with the q-tip, if you have to,let dry for 24 hours and mix more and put more on. let dry another 24 hours, replace tank back in it's place and you've solved your leak. (epoxy does wonders if its used properly.
Posted on Nov 23, 2008
SOURCE: Where is the windshield washer
The washer pump is located at the bottom of the fluid tank. On a '96 or '97 it's on the right (passenger side) under the inner fender liner. Remove the Right front wheel. Remove the lower engine cover. You should be able to get the pump out. If it's corroded fast, then you'll have to remove the inner fender liner (lots of clips will break) and remove the entire tank assembly.
Posted on Apr 20, 2011
Testimonial: "Thanks a lot. This has been a big help as this item is not covered in the Haynes manual. Keep it up.."
They probably knocked loose one or more of the tubes that carry the washer fluid. Try to trace the lines back from the sprayer nozzles and you may find the problem.
Posted on Sep 17, 2012
Tips for a great answer:
Nov 23, 2016 | 2006 Toyota Matrix
Oct 18, 2014 | 2000 Toyota Camry
Jul 24, 2010 | 1990 Toyota Tercel
Feb 11, 2010 | 2003 Toyota Corolla
Sep 22, 2008 | 1995 Toyota 4Runner
Aug 07, 2008 | 1997 Toyota Camry
Aug 07, 2008 | 2002 Toyota Avalon
Sep 20, 2017 | Toyota Cars & Trucks
47 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: