Question about 2007 Toyota Land Cruiser

Open Question

Toyota sahara cooler box not working

Toyota Sahara console cooler box , where is the cooling unit and how to get to it, also how to take out the cooler box

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Junoon007
  • 1011 Answers

SOURCE: 2003 Sahara Landcruiser Console removal

Dear Sir/Madam,

Just got done doing it actually. remove all the visible screws.. two in the front two above the cup holders. 4 Screws total there. Next pull off the black part that has the cup holders. Under that there are 2 screws holding the console to the floor. Remove them. Then go to the sides on the back.. There are two covers they are oval shaped. pop them off and remove the 4 bolts in there. Then pull off the top part. Next pull out the whole console. The only part thats left it the metal support. It will have 4 bolts and 4 screws attaching it to the floor. Then your done. Except for the two ugly holes where there is no carpet.

Go to this link and follow the 7 steps to fix your problem.....

http://www.ehow.com/how_2092450_replace-car-console.html

Thanks
good luck



Posted on Aug 07, 2008

  • 202 Answers

SOURCE: 1999 toyota rav 4 engine oil cooler bolt torque setting

INSTALL OIL COOLER
-clean the oil cooler contact surface on the oil cooled mounting
-install a new O-ring to the oil cooler.
-temporarily install the oil cooler with the nut
-apply a light coat of engine oi on the threads and under the head of the relief vale
-install the plate washer and union bolt. torque 78Nm (800kgfcm, 58 ft lbs.)
-tighten the nut,torque 8.8Nm (90kgfcm, 78 inch lbs.)
-connect the 2 water bypass hoses to the oil cooler.

HOPE THIS CAN HELP.

Posted on Apr 26, 2010

Testimonial: "Great work thanks for the info."

SOURCE: We have an 86 toyota

Hi Kositsin,
Have your shop check the bearings adjacent to where the leakage is apparent. If the oild seals keep breaking down, there must be another reason causing it.
Please rate this answer
Regards Johngee10

Posted on Feb 10, 2011

  • 5 Answers

SOURCE: I Want to find correct sieial numbers of engin

Townace VIN (Vehicle Identification Number) plate (with all the vehicle identifying information) is here:
sit in the driver's seat;
reach down between your legs to mid-calf;
the plate is under the carpet flap behind your hand;
get out of the vehicle to read it;
shine a torch on it from the side so you can clearly see the embossed data.

Very carefully copy all the information onto a card and keep it in your wallet. (Beware: don't mix up the I's and L's. [Like I did.])

Posted on Aug 03, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace a 2000 Toyota Avalon blend door actuator?


The blend door actuator is one of the heating control units found in the center console. Purchase a console tool and remove the plastic console cover after dismantling the front of the heating control. There should be a series of clips that hold the plastics on. Once you get to this point you'll want a tray to keep track of screws. Unscrew the mounts for the control unit and pull them out, taking care not to damage the ribbons or cables connecting the unit to the heating and cooling unit. Unplug the offending actuator from the control unit and plug the new one in. Then reverse process to reinstall the control unit and plastics.

You can find diagrams on google, and the actuator on amazon.com or rockauto.com.

NOTE: Caution; make sure to disconnect the battery to prevent potential electric shock.

Jan 28, 2015 | 2000 Toyota Avalon

1 Answer

Im looking at buying a 1992 toyota landcruiser 70 series with the 4.21hz motor it is manual gearbox so no trans cooler but there is oil in the radiator what are the possible causes thanks


IT is possible that the head gasket is loose and the oil passage to the overhead gear is compromised and oil is being force past the gasket into the cooling system. Some engines have an engine oil cooler in the side to cool the engine oil and if yours has one it may be split in internally. They can be tested but are di9fficult to repair. You will see radiator hoses going to and from the unit and it is bolted to the block

Oct 06, 2013 | 1994 Toyota Land Cruiser

1 Answer

Cooling fan relay 2007 toyota Solara


Ask a repair shop to look in their data
base for the locations

Jul 25, 2013 | 2007 Toyota Solara

1 Answer

WHY DOES MY RADIATOR FAN COMES ON ONLY WHEN MY AC IS ON ON MY 88 TOYOTA COROLLA


Hi,
it is generally because the air con heat exchanger has to be cooled in order for your air con to work correctly and cool the interior of your car.


The air conditioning utilises a gas by the name of freon. This gas is pumped around the air con system by a compressor. The gas, going through the aircon cooler or heat exchanger, starts to cool down. Depending on the system layout, the gas is forced through a very small aperture situated after the cooler. It reverts to a liquid, passes through the matrix in the car, a fan blows the interior air of the car through the matrix. The fluid picks up the heat, and cooler air exits the matrix and, (hopefully) cools the interior of the car. This endless cycle is repeated as long as the air con is powered on.

Hope this brief description will suffice.

Jan 25, 2011 | 1988 Toyota Corolla 4 Door

1 Answer

1999 toyota rav 4 engine oil cooler bolt torque setting


INSTALL OIL COOLER
-clean the oil cooler contact surface on the oil cooled mounting
-install a new O-ring to the oil cooler.
-temporarily install the oil cooler with the nut
-apply a light coat of engine oi on the threads and under the head of the relief vale
-install the plate washer and union bolt. torque 78Nm (800kgfcm, 58 ft lbs.)
-tighten the nut,torque 8.8Nm (90kgfcm, 78 inch lbs.)
-connect the 2 water bypass hoses to the oil cooler.

HOPE THIS CAN HELP.

Apr 26, 2010 | 1999 Toyota RAV4

1 Answer

98 Celica overheating problem


c7d7b55.jpg Cooling Thermostat.
Look along the radiator hose where it enters the engine. This controls the water temperature.


toyotacelicathermalfanswitch.jpgToyota Celica Thermal Fan Switch The Toyota Celica thermal radiator fan switch is usually located in the radiator or the engine block and has 2 or 3 wires coming from the unit. The 3 wire switch has a dual sensor for dual speed radiator fans. The Toyota Celica thermo fan switches come in the factory temperature settings and also come in cooler thermostatic settings so the fan will come on at a lower coolant temp.

The Toyota Celica cooling system is made of aluminum components and requires a Phosphate free coolant. DO NOT PUT an over the counter antifreeze in your Toyota Celica, as it will ruin the radiator and water pump.

Feb 19, 2009 | 1998 Toyota Celica

1 Answer

93 camry 4cyl a/c epancion valve


The expansion valve is located on the evaporator, under the dash, in the main cooler box. You have to pull the cooler box out of the car to change it. Not easy.

Aug 06, 2008 | 1993 Toyota Camry V6

3 Answers

2003 Sahara Landcruiser Console removal


Dear Sir/Madam,

Just got done doing it actually. remove all the visible screws.. two in the front two above the cup holders. 4 Screws total there. Next pull off the black part that has the cup holders. Under that there are 2 screws holding the console to the floor. Remove them. Then go to the sides on the back.. There are two covers they are oval shaped. pop them off and remove the 4 bolts in there. Then pull off the top part. Next pull out the whole console. The only part thats left it the metal support. It will have 4 bolts and 4 screws attaching it to the floor. Then your done. Except for the two ugly holes where there is no carpet.

Go to this link and follow the 7 steps to fix your problem.....

http://www.ehow.com/how_2092450_replace-car-console.html

Thanks
good luck



Aug 07, 2008 | 2003 Toyota Land Cruiser

Not finding what you are looking for?
2007 Toyota Land Cruiser Logo

Related Topics:

484 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...