Question about 1995 Ford Taurus

Open Question

Ford taurus 95 coolant temperature sensor location

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 225 Answers

SOURCE: where is the coolant temperature sensor located on

usualy next to or connected to the thermostat

Posted on Nov 03, 2009

michigan man
  • 3533 Answers

SOURCE: i cant find the IAT sensor on my 98 ford explorer XLT v 6 SOHC

Try “autozone.com” or your local library for diagrams and step by step instructions.

Posted on Mar 12, 2009

  • 103 Answers

SOURCE: Overheating problem

With the sensor unplugged and the fan works,, replace the new sensor,,,,, it is probably defective. I have seeh this before.

Posted on Jul 28, 2009

  • 169 Answers

SOURCE: sensor locations

air intake look at snorkel it could be part of mass air flow check intake for eng coolant

Posted on Aug 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the coolant temperature sensor located on a 2010 taurus


Look for the thermostat housing. They're usually located very near there. Will have an electrical plug at the end and screw directly into the housing or the block.

Jul 12, 2016 | 2010 Ford Taurus

1 Answer

I change the temperature sensor but the needle does not move how can I change the needle? This is a 95 ford Econoline 350


you have probably been misinformed. The needle on the temperature gauge is controlled by the temperature SENDER unit ( not the temperature SENSOR unit) The sender unit is a single wire unit that is a resistance unit affected by heat of the coolant, The hotter the coolant the less resistance the higher the reading
The temperature sensor unit is a 2 wire unit that tells the ECM when to switch on the fan, when to go into limp mode if overheating and when to adjust the air/fuel mixture as the coolant warms up

Oct 20, 2014 | Ford Cars & Trucks

1 Answer

Diagram 2002


next to the thermostat , follow this u-tube link for good explanation a comments
Replacing 2004 FORD Taurus coolant temperature sensor

Jul 17, 2014 | 2002 Ford Taurus

1 Answer

What is the sensor that sits next to (behind) the coolant temp sensor 2000 taurus


If you can tell me the color of the wires I can tell you for sure. Normally one sensor is for the gauge and the other is for the computer.

Jun 19, 2013 | 2000 Ford Taurus

1 Answer

Engine fan won't come on


IF COOLANT FAN FUSE AND RELAY OKAY.HOT WIRE COOLANT FAN TO SEE IF FAN MOTOR OKAY.IF FAN MOTOR OKAY.THE ENGINE COOLANT TEMPERATURE SENSOR MORE LIKELY BAD.THE ENGINE COOLANT SENSOR WHEN ENGINE COOLANT GETS HOT IT CAUSES ENGINE COOLANT TEMPERATURE RESISTANCE TO DECREASE CAUSE COMPLETE CIRCUIT IN WHICH POWER FROM PCM TO ECT SENSOR WILL SENT POWER TO COOLANT FAN RELAY THEN CAUSE COOLANT FAN TO TURN ON. HAVE ECT SENSOR OR ENGINE COOLANT TEMPERATURE SENSOR CHECK USING CODE SCANNER TO MAKE SURE ITS WORKING BEFORE SPENDING EXCESS MONEY.

Jun 18, 2011 | 1998 Ford Taurus

1 Answer

Where is the tempoture sensor located at on a 1996 Ford Tarus


Hi there,

The coolant temperature sensor of your vehicle is located on top of the intake manifold.

Glad to be of help...

Jan 23, 2011 | 1996 Ford Taurus

1 Answer

Where is the coolant temp sensor on 1996 ford Taurus wagon


COOLANT TEMPERATURE SENSOR LOCATED ON TOP OF INTAKE MANIFOLD.

Dec 01, 2010 | 1996 Ford Taurus

2 Answers

1992 Ford Taurus with a 3.8l V6 the cooling fan


The Taurus has Two temp sensors. One for the dash, which is isolated, then one for the PCM, it also controls when the fan relay should actuate. Its a 2 wire sensor, just above the thermostat. If you remove the harness from that sensor, and the cooling fan comes on, at any temp, (should take 5- 10 seconds) then thats your fault.

Sep 16, 2009 | 1992 Ford Taurus

1 Answer

2001 ford taurus with check engine light on. code


Make sure you replaced the right one there are two sensor's for the coolant, one takes coolant temp and the other one runs the fans for the radiator. Both are located on drivers side of the block. 2 wire leads on each how ever both are different in sending readings to the computer.Both look just alike also. Just make sure you replaced the right one. Or replace both.

Sep 15, 2009 | 2001 Ford Taurus

2 Answers

My 95 Taurus Sho 3.2L, stalls every day. All lights comes on when it stalls. The coolant reservoir is full but, the light in the panel shows LOW COOLANT. Ford Dealer can't find the problem. They used the...


Will it stall if you keep your foot on the gas like the Idle speed is set low? Possible Idle speed motor? I'll have to look up the location of the low coolant sensor.

Jun 07, 2009 | 1996 Ford Taurus

Not finding what you are looking for?
1995 Ford Taurus Logo

Related Topics:

227 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...