Question about 1997 Ford Explorer AWD

1 Answer

#4 cylinder mis firing. I thought to try and change wires? How do I do that?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,596 Answers

One at a time !!!!!!!

Posted on Jan 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mis fire on cyclinder one and overheating for an 2005 Chevrolet equinox


You are describing the classic symptoms of a blown head gasket from the cylinder into the water jacket. This causes loss of compression in the affected cylinder and also injects hot gases into the cooling jacket resulting in overpressure and overheating of the coolant. Perform a compression check of all cylinders and if any are appreciably lower than the others, you are looking at some major engine work.

Aug 02, 2014 | 2006 Chevrolet Equinox

1 Answer

Miss fire cylinder 4 1998 chevy metro lsi


check the injector for that cylinder as the electrics is not the only thing to cause a misfire.. Put the injector in another cylinder and see if the misfire has moved

Mar 01, 2014 | 1998 Chevrolet Metro

1 Answer

2003 TRACTOR 4X4 WAGON IS MIS FIRING ON CYLINDER TWO


Try to see if you can get view the are where the plugs are firing in the dark. Check for arcing off the plug or wires to the metal engine parts. I fought with a vehicle for days trying to determine a misfire problem on a car that we just put new plugs, wires, and coils on. Turns out the ceramic insulator on one of the BRAND NEW plugs had a hairline crack down the length of the insulator. You could not see if with the naked eye, but you could feel it if you ran your finger over it. Easiest to find if you can run the engine in a dark garage.

Nov 24, 2012 | Chevrolet Tracker Cars & Trucks

1 Answer

Scanner said #4 cyl mis-fire changed #4 coil still reads #4 mis-fire any ideas


Replace the spark plug and if the problem still exsist replace the the ignition wire to the #4 cylinder.

Dec 01, 2010 | 2002 Ford Escape

3 Answers

3.4 GM v6. dead skip on #4 cyl. Spark plug ok, wire ok, replaced injector. Still dead skip. Found cyl. by disconecting wires to injectors. #4 not affected.


The very first thing that you should do after finding a cylinder mis-fire that can not be easily explained such as a fouled spark plug, is to take a compression test especially of the mis-firing cylinder to be certain that the mis-fire is not caused by a mechanical problem, and I have seen people spend a lot of time and money trying to hunt down an electrical problem when the actual problem was a mechanical one, and no electronic part will repair a burnt or bent intake or exhaust valve.

Jun 06, 2010 | 2003 Buick Rendezvous

1 Answer

Has a mis changed plugs and wire scan tool says mutiple cylinder mis fire


Most likely the fuel injectors need cleaning,try lucas fuel treatment.

Jan 30, 2010 | 1998 Pontiac Grand Prix

1 Answer

Cylinder 1 mis fire on with 4 l


You could try an additive to go in your fueltank, in England its called Redex or STP, that may help as they are designed to brake down the carbon build up

Jan 01, 2010 | 1998 Jeep Grand Cherokee

2 Answers

Code po304 #4 cylinder mis fire


ck if you have spark at the coil for that cylinder. check the plug wire closely. if it has spark at the coil, then replace all the spark plug wires.

Oct 12, 2009 | 2000 Cadillac DeVille

2 Answers

2000 Kia Sephia p0303 code engine misfires


do a compression test. cylinder 3 could have a bad valve lifter or valve.kia sephia dont have push rods.it have a bucket type followers.a intake leak to that cylinder can also cause misfire problems.

Jun 06, 2009 | 1999 Kia Sephia

2 Answers

Engine light po 300 code


IS THIS A 99 CROWN VIC? IF SO IS IT MISFIRING? IF THIS IS THE CASE YOU MORE THAN LICKLY NEED PLUG WIRES.

Sep 06, 2008 | 1999 Ford Crown Victoria

Not finding what you are looking for?
1997 Ford Explorer AWD Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...