Question about Cars & Trucks
Wont rev past 4000 rpm
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Sounds like a fuel filter issue. If the filter is clogged or is getting to the point where it's going to be clogged badly the amount of fuel going to the engine will be restricted. This would cause your stated problem. Theoretically there isn't much of a need to go over 4000 rpm unless you are racing with the car but I think most bimmer owners can understand where you are coming from:) As far as the 1993, I'd check all your intake piping and vacuum lines and make sure there are no leaks whatsoever. An easy way to check is to have the car running and spray carb cleaner on the intake piping and such and see if your revs increase, if they do you've got a leak. Hope this helps! I'd be glad to help with any other questions you might have a please don't forget to rate me.
Posted on May 23, 2009
SOURCE: holden barina 2003
it means its due for service. If u wanna get rid of it without servicing the vehicle then as you start the car simultaneously push the ODOMETER reset button on the dash and it will wipe it. This will however just delay the point your car needs servicing.
Posted on Jun 28, 2008
i have a ford fairmont 95 ef that rattles when i accelerate sounds like chains on a bike clunking and wen i put my foot down it wont revv any higher than 3500 rpm and keept jerking about like it was tryna risist going faster and before u ask me yes the car was in drive so it wasnt because i forgot to change gear if any one can help me as to wat the problem might be it would be very much appreciated
Posted on Dec 15, 2009
This sounds like a vcuum leak in one of the hoses and you can check this by getting a can of carburetor cleaner and spraying short squirts around the enging area. It the idle jumps up when spraying the try to locate why and where your sprayed. See if you can here a hissing like sucking air. Next step and you might as well check it any how is the aiir filter. Take it out and hold it to the sun or some bright light and see if the light is trying to filter through. If not and it is dark then knock it gently on something and try to get most of the dust and dirt off it. This may give it a quick fix but will need to be replaced pronto. If neither of these tips help then let me know and I will come up with some more test for you. Good Luck, Raz
Posted on Apr 18, 2010
Testimonial: "thanks let ya know. later."
Tips for a great answer:
Sep 27, 2016 | 2007 Hyundai Santa Fe
Feb 05, 2016 | Cars & Trucks
Nov 08, 2015 | Holden Cars & Trucks
Jul 31, 2014 | 2006 Holden Barina
Mar 13, 2014 | 2000 Saturn SL
Dec 04, 2013 | 1996 Ford Probe
Oct 20, 2012 | 1998 Jaguar XJ8L
Mar 26, 2012 | Cars & Trucks
94 people viewed this question
Usually answered in minutes!