Question about Peugeot 206

Open Question

Hazard lights come on when i indicate - 206 Peugeot Cars & Trucks

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The indicator lights are all stuck on. AU Ford station wagon. Removed relay, and all fuses, but still on. Disconnected battery and they turned off. Reconnected battery and they all came back on with no...


The AU ford has two indicator relays , turning lights and hazard lights ,both use the indicator lights ,the hazards flash both front and rear lights , the turning indicator flashes one front and one rear light. I think the fault may be in the hazard circuit.

Feb 25, 2015 | Ford Cars & Trucks

1 Answer

When I turn on either left or right indicator both indicators light up


try pushing the hazard light switch again. what you have is the hazard lights in operation ( both sides indicators working) In normal indicator operation power from the flasher unit is directed to which ever side you select but by pressing the hazard light switch the indicator power lights up all lights.

Nov 13, 2014 | 1987 Citroen AX

1 Answer

Hazard lights come on when using indicators, no blown bulbs


the hazard lights are the indicators and all the hazard switch does is to connect all 4 indicators together. So I would check that the hazard switch has not being engaged or that the switch is faulty.

Aug 11, 2014 | Cars & Trucks

2 Answers

I have a 2005 and the hazard lights keep flashing, I don't know what to do.?


The hazard lights are only a connection of all indicator lights through the hazard light switch on the dash. Press the switch again and if there are no other problems the lights will return to the indicators only

Oct 16, 2013 | BMW Cars & Trucks

1 Answer

2011 Expedition left rear blinker light not working even after replacing bulb...also, brake bulb does not work with hazards, but does work with brakes and headlights...ideas?


In my experience, when the hazards are on, the brake lights are not supposed to indicate braking in this day and age of automobiles. In other words braking lights will not override the hazards when hazarding. I believe the 3rd or high mount brake light should work when hazarding and braking at the same time to indicate you are braking. I find it very seldom is there the need to drive and have the hazards on....in torrential rain going at low speed perhaps. Anyway, hope this was helpful. If not, I apologize.

Jan 10, 2013 | Ford Expedition Cars & Trucks

1 Answer

I have an 02 kia sportage. my signal lights come on but dont blink outside. no lights for the signal lights come on on the dash at all. also, no hazard lights.


If the 15A HAZARD fuse in the passenger compartment fuse box is OK, power is getting to the hazard function of the flasher unit. Pressing the hzard switch should cause the hazard lights to flash. HOWEVER, there is an electronic time and warning indication system module connected to to the hazard switch lead and that may be affecting things. If the 10A TURN fuse is OK, power is applied to the turn switch (with the engine in START or RUN) and you state you can select a right or left turn. HOWEVER, the RED/WHT and RED/BLU outputs from the flasher unit connect directly to the front and rear turn lamps and the instrument cluster turn indicators so you are not getting any flasher output. Again, that electronic time & warning indication system module could be affecting things

Oct 26, 2012 | Cars & Trucks

1 Answer

My turn signals and hazard light dont work on my 1997 dodge caravan


check for a feed first to teh indicators and the hazard switch if you have a feed then renew the hazard light switch first as this switch if defective will stop all the indicator lights from working

Dec 10, 2010 | 2006 Dodge Caravan

1 Answer

Indicator Problem


when you noticed the indicator being on solid, but flashing with the hazards, are you inside your car? I mean have you gotten out of your car to check if the bulbs are working when the indicator thrown and when the hazards are on. A hard on indicator usually means that you have a bulb burnt out. The hazards will still flash as normal when inside the car even if a bulb is burnt out because the hazards do not run via the Electronic Flasher Module. The EFM is what detects a burnt out bulb

Aug 24, 2009 | 2005 Audi A3

2 Answers

No hazard lights


Check the hazard switch and the connector to hazard switch see if u have the power and earth to hazard switch if there is power and earth to switch then replace ur hazard switch its faulty but if there is no power and earth to switch then it has whirring problem

Jun 16, 2009 | 1997 Mitsubishi Mirage

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Wahs Team

Level 2 Expert

205 Answers

yadayada
yadayada

Level 3 Expert

74945 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...