Question about Chevrolet Blazer

1 Answer

My tank lickeing from top do have to put a new fuelpump in it

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 5,252 Answers

If the tank is leaking from the top, it seems the pump is working. You may have to lower the tank to fix the leak, if you can't get to it where mounted. Maybe a main fuel line or return line has sprung a leak.

Posted on Jan 07, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change fuelpump in 1991 buick lesaber


Drop the fuel tank & take pump
out the top

Watch some video on it

Oct 07, 2014 | Cars & Trucks

2 Answers

Where is the fuelpump in a 2001 olds alero


There should be a couple bolts holding the
tank straps on.

Not really a driveway job,better on a lift

There are very few if any vehicles, that ever
have access from the trunk or under the rear seat

I'm not aware of any GM Vehicles that ever had that

Jun 26, 2012 | 2000 Oldsmobile Alero

1 Answer

Power loss after i changed fuelpump and filter


If you did not take the tank off and clean it out with good gas and you just stuck the new pump in, you could have sucked up a lot of **** into your new filter. There is a fair bit of sediment in the tank of a 90 tank and if you put a new pump AND filter in without cleaning out the tank, the extra pressure you were trying to achieve worked and you may have clogged your new filter. Try putting another new filter or clean your new one if possible with good gas and then fill your tank with premium and a bottle of z-max wouldn't hurt you any either.

Apr 13, 2012 | 1990 Ford F150

1 Answer

Where is the fuel pump relay on a 1991 gmc jimmy


Thye fuelpump relay is located to the right of the brake booster. this is for a 1991 gmc jimmy (s-15)

I have enclosed a diagram to help locate the relay.

The most common reason for no fuel pressure on these trucks is not the relay but rather the fuelpump itself. the pump is located inside the fuel tank.

There is also a problem with the wiring to the fuel pump, you will need to locate the top of the tank and then off to side of tank is wiring .
This wiring comes off the top of the tank, you will need to check and there is connector problems..
there is one or two ground wires that come off wiring to top of tank which run to frame, check to make sure the grounds are good. if you end up with a bad pump you will see a notice to rewire a new fuelpump connector. hope this is helpful. good day.3_4_2012_1_29_16_am.gif

Mar 03, 2012 | 1991 GMC S-15 Jimmy

1 Answer

1989 Chevy Silverado pickup starts when you put gas in carb but the fuel enjector will not spray fuel into carb


The first test would be the fuelpump, this sounds like the pump is not pump the fuel to injectors, as you said that if you give it fuel into throtlebody it will start. this tells me its not getting fuel and the most common reason is the fuelpump, a quick test that sometimes works is to have someone trying to start it while you beat the bottom of the tank with a rubber hammer, this sometimes shakes the pump and it makes contact and starts truck, if this happens then the pump is bad for sure, if it doesnt start then you will need to test for power and ground at the connector going to pump, this connector is locted neat the tank, you will see wires coming from the top of the tank going to frame, theres the connector to test. good day.

Apr 10, 2011 | Chevrolet Silverado 1500 Cars & Trucks

3 Answers

Im having fuel pump issues. could you please tell me where the fuel pump is located on a 2002 Pontiac Grand Am SE


The fuelpump is located inside the gas tank, you will need to drop the tank to replace the pump, heres a picture of the pump and in goes in through the top of the tank, the fuelpump is called a fuelpump module because it comes complete with holder sending unit and all other parts as you will see in the picture,hope this helps, good luck.johnjohn2_17.jpg

Nov 09, 2010 | 2002 Pontiac Grand Am

1 Answer

I have a 2001 Ford F150. It turns over but will not crank. Tried to jump it off but will not start. Gages and lights work inside. What does that sound like to you? Someone mentioned a fuel pump module....


That may be the problem, you would have to do one thing to make sure and that spray starting fluid into the throtle and if it starts for a few seconds then i would say its the fuelpump module, a fuelpump module is a unit with the fuelpump and preasure sensor and sending unit as one i will show you a picture, this unit is located inside the gas tank the tank will need to be dropped in orderto install the pump module, in goes in on top of the tank after tank is removed,johnjohn2_15.jpg

Nov 08, 2010 | 2001 Ford F150 Styleside SuperCrew

1 Answer

Where is the gas filter located? please


the location for the fuel filter on this 2004 mpv is located inside the gas tank, this filter is attached to fuelpump asm, this filter is good as long as the life of the fuelpump, i only replace them when i'm replacing the pump. theres no need to replace the filter, hope this is helpful, heres a picture to show you the filter, as you see the filter is connected to fuelpump module housing, if you think you need to replace it then you will need to remove the module from top of the tank and to do this you drop the tank or go through acces hole in rear seat floor. good luck, hope this is helpful.d7bfa9c.jpg

Oct 31, 2010 | 2004 Mazda MPV

1 Answer

How do i change a faulty evap selinoid


the evap solenoid is located on top of the fuel tank......if you are going to change it you should go ahead a put a new fuelpump module in there it comes with the solenoid ......the only way to access it is to drop the fuel tank.....hope this helped

Sep 20, 2009 | 1996 Chevrolet Blazer

1 Answer

Fuelpump needs replaced what are the steps to change the fuelpump how do you change the fuelpump?


first of all you will need to put the car on jack stands and secure the rear of the vehicle so it does not roll disconnect the negative side the battery you will need a floor jack to lower the fuel tank down be sure to put a small board on top of the jack so you do not put a hole in the tank also get some WD40 or something similar to spray on the bolts to help loosen them once you get the tank down unplug the wires on top of the tank and be careful not to break them and then you have to get that center ring to move around and once it is free your fuel pump will come out

Feb 17, 2009 | 1996 Ford Explorer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...