Question about 1991 Toyota Celica
The clutch feels fine and the car will shift into gear, however it will not go forward or backward.
Have you had problems with clutch slipping up to this point? Like engine revving up and no change in speed while driving. Like going into 4th or 5th gear, letting clutch out, giving gas, and feels like no response? Engine just revs up? That's a slipping clutch.
If that's your problem, you need a new clutch.
Posted on Jan 07, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2001 Toyota Celica GTS Clutch
i paid a friend to do it because it's a lot of work! if you haven't already treid to or got it done just know that when my friend did it; it took him like 8 hours (he'd never done one on a celica, but had done them on american cars) so if your not familiar with it... not a good idea to do alone. I watched him do most, but i'm not the best to talk to about it.(plus i have a 2000GT) Some of the parts that i can remember that he took out to get to the clutch were the front driver's side tire, the axel on the same side, ....some other parts in there....and ALSO parts on top...the intake also had to be taken out just to have enough room to do the job. parts are cheap...just ask for a clutch kit at auto zone or whatever. around $150. another random tid bit that might help is make sure to tighten the engine mounts really good afterwards or else it will jump around in there when you turn it on and cut it off. buy gear oil before you start as well because you will need to put some in after the new clutch is in. i will need to put the car on a real lift... you need a lot of space underneath and on top to work. and most likely two people. well hope some of this helped.
Posted on Sep 06, 2008
First you have to bleed air from clutch fluid.
if it is not ok, Remove clutch agan & check pressure plate finger blance or damage.
Posted on Nov 18, 2009
Tips for a great answer:
Dec 20, 2015 | 2008 Toyota Camry
Sep 07, 2010 | 2002 Toyota Celica
Oct 15, 2009 | 1991 Toyota Celica
Oct 14, 2009 | 1991 Toyota Celica
Aug 19, 2009 | 1991 Isuzu Trooper
284 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: