Question about Cars & Trucks

1 Answer

1996 chevy s10 v6 4.3l brake light problem

All lights work ,just brake lights ..replaced pedal switch , replaced cruise control switch , replaced all fuses , replaced all bulbs .. flashers ok , blinks ok , day time lights & night ok ...just no brake lights ...HELP

Posted by on

  • Steven Dean
    Steven Dean Jan 07, 2013

    might i add , there is power cause i have blinkers , driving lights , hazard lights just no brake lights ...everything else ok , ..no brake lights

  • Thomas Perkins
    Thomas Perkins Jan 07, 2013

    Could be the ground wire at light is not grounded good.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 14,204 Answers

You did all this replacing but didn't check and follow power.Got any money left.lol,get a meter and check power at brake light switch,see if power is going to switch.

Posted on Jan 07, 2013

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

duane_wong
  • 6826 Answers

SOURCE: i have a 1996 chevy s-10pick-up truck my blinkers

Flashers are generally located either under the dash (they hide them behind the horizontal panel) under the hood in the fuse box.

Also, relays can be hidden under the hood or in the fuse box.

The interior fuse box is where the 'turn signal' fuse is located.

Circuit Protection Fuses Underhood Fuse Block (Base) gm_truck_s10_undr-hd_fs-blk.gif

gm_truck_s10_undr-hd_fs-blk_chrt1.gif

gm_truck_s10_under-hd_fs-blk_chrt2.gif

Underhood Fuse Block (Except Base) gm_truck_s10_up-lvl_pk-up_fs-blk.gif

gm_truck_s10_up-lvl_pk-up_fs-blk_chrt1.gif

gm_truck_s10_up-lvl_pk-up_fs-blk_chrt2.gif

gm_truck_s10_base-pu_undr-hd_fs-blk-3.gif

I/P Fuse Block gm_truck_s10_i-p_fs-blk.gif

gm_truck_s10_i-p_fs-blk_chrt1.gif

gm_truck_s10_i-p_fs-blk_chrt2.gif

gm_truck_s10_i-p_fs-blk_chrt3.gif

prev.gif next.gif

Posted on Jul 19, 2010

  • 2309 Answers

SOURCE: 1996 Chevy S10 ZR2 No brake lights, CHMSL works,

check voltage from brake switch to signal light switch, signal goes from brake pedal to signal switch then to taillights, i suspect the problem is in that area

Posted on Oct 22, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

97 chevy no brake lts or cruise


If you are stating no brake lights or cruise control check the sensors attached to the brake pedal stop ..One sensor if for cruise control and one is for the brake lights....

Feb 17, 2015 | Chevrolet Silverado 1500 Cars & Trucks

2 Answers

Fix cruise control on my 2009 Chevy tahoe


Most common failure (other than fuse) is the switch at the brake pedal which kicks it out of cruise. Switch must be in correct position and adjusted such that it is depressed fully when brake pedal is up.

Aug 01, 2014 | 2009 Chevrolet Tahoe

1 Answer

CRUISE CONTROL WON'T WORK ON 2005 CHEVY TRAILBLAZER


check cruise control fuse and check the brake lights see if brake light working because the brake light switch will deactivate cruise control when brakes is applied.if brake lights dont work either fuse blowed or switch bad.if all is good have vechicle code scan because cruise control control by PCM and vechicle speed sensor and thottle actuator control motor.

Apr 17, 2013 | 2004 Chevrolet TrailBlazer

1 Answer

My cruise control on my 2007 chevy 1500 sometimes works and sometimes does not.


Hold your foot under brake pedal pulling up on it if this cures problem adjust brake light switch up a ways on fire wall side of pedal arm

Sep 24, 2012 | 2007 Chevrolet Chevrolet Silverado 1500

1 Answer

Brake light switch on 2002 chevy siloverado


Cruise control deactivates once you press the brake pedal. The brake switch us an input to the cruise control module. So it is possible that your brake switch went bad keping the lights on and making the cruise control module think you are applying the brakes when in fact you are not. Replace the brake light switch and check operation.

Jun 27, 2012 | Cars & Trucks

1 Answer

1996 Chevy S10 ZR2 No brake lights, CHMSL works, new bulbs, new brake light switch, good ground, hazzards work, signals work runners work, any suggestions?


check voltage from brake switch to signal light switch, signal goes from brake pedal to signal switch then to taillights, i suspect the problem is in that area

Oct 22, 2010 | 1997 Chevrolet S-10 Pickup

2 Answers

Ive replaced the brake lite switch twice on my 1996 grand chrokee -when the cruse control is on it will only engadge if i lift up on the brake pedel-but soon as the pegel drops it turns off the cruse...


the brake light switch is part of your cruise control circuit. check the adjustment. it should be threaded so that you can change the depth on it. probably not your switch at all.

Mar 26, 2010 | Jeep Grand Cherokee Cars & Trucks

2 Answers

Need a wiring diagram for a chevy s10. brake


your power starts at the brake light fuse,check with a test light,then proceed to stop light switch on brake pedal under dash,one wire will be hot when when you check it with your test light, the other won't be until you press down the brake pedal then the power flows through to the second wire,if no power to second wire replace switch,if you have power remove tail light bulbs and check for power in side socket.

Nov 24, 2009 | 1997 Chevrolet S-10 Pickup

1 Answer

No brake lights-the turn signal, four way flashers work. The cruise control cancels when applying brakes. ?


Cruise control is suppose to cancel when brakes are applied.

Did you try just changing the bulbs?

If its not the bulbs I would have to say check the brake light switch at the pedal, it is a different switch than the cruise control cut out switch.

Nov 13, 2009 | 1996 GMC Suburban

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

152 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...