Question about 2004 Pontiac Vibe

Open Question

Replacing the o2 sensor on a pontiac vibe - 2004 Pontiac Vibe

Posted by Anonymous on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 169 Answers

SOURCE: Upstream O2 sensor location?

That is the first sensor closest to the engine. The downstream sensor is the one behind the converter.
Good luck.
Please rate this response , and let me know if ya need more help!

Posted on Aug 31, 2008

  • 80378 Answers

SOURCE: o2 sensor 2002 pontiac gran prix

It is in the exhaust pipe on the engine side of the catalytic converter, it is round, you may need a special socket to get it out.

Posted on Sep 02, 2008

  • 4102 Answers

SOURCE: o2 sensor location on 1996 pontiac grand am 2.4l


clicking above will take you to a site that should give you the info you need.

Let me know how you get on or if you need further assistance ok

Posted on Nov 10, 2009

  • 1244 Answers

SOURCE: 04 Pontiac Vibe bad gas mileage without a code and then the p0420

that code is from having the plugs wires reversed as you did and the o2 senors regrsitered the overload on gas emmions once you remove the battery cables for about 5 minutes and then recconect and run the engine it should be okay

Posted on Jan 19, 2010

  • 332 Answers

SOURCE: How to clean O2 sensor on a 2007 Pontiac G6?

O2 sensor are located before and after Catalytic Converter ( exhaust system of your car). If you car's engine is 4 cyl you have 2 O2 sensors and if you car's engine is 6 cyl then you have 4 O2 sensors ( for each bank, 2 for left bank and 2 for right bank). Hope it helps and comment if you need more advice. Please don't forget to rate the answer it helps with my ratings, thanks!

Posted on Apr 28, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

2004 pontiac vibe. both o2 sensors have been replaced and the code was cleared. engine lite came back on. its saying p0042 bank1. what else can it be.

There is 2 system in O2 sensor one is the sensor itself
and the other one is the heater
the code you have means the heater is not working look for the fuse or find out why heater is not working
don't put any anti seize lubricant on O2 sensor no ground for heater
hope it help

Jan 17, 2013 | 2004 Pontiac Vibe

1 Answer

05 Pontiac vibe it has a lean code what could it be

Depending on what the actual code is, it could be a faulty O2 sensor or a fuel pressure problem among other things.

Aug 25, 2012 | Pontiac Vibe Cars & Trucks

1 Answer

My 2006 vibe reads poor catalyst what is this

The computer reads the front and rear O2 sensor and decides if the catalytic converter is working.
Either the cat is faulty, or one of the sensors is faulty, or something upstream in the engine is wrong.

Jul 08, 2012 | 2006 Pontiac Vibe

1 Answer

I needed a new oxygen sensor for my 2005 Pontiac Vibe last December and had a Bosch 15309 installed, which did not remedy the problem. Last week I took it in for brake issues and they informed me they got...

Your problem is not the brand of O2 Sensor.
You issues, are that the vehicle hasn't been properly diagnosed.
Stay away from a dealer, and find a competant local shop

Oct 18, 2010 | Pontiac Vibe Cars & Trucks

1 Answer

04 Pontiac Vibe bad gas mileage without a code and then the p0420

that code is from having the plugs wires reversed as you did and the o2 senors regrsitered the overload on gas emmions once you remove the battery cables for about 5 minutes and then recconect and run the engine it should be okay

Jan 19, 2010 | 2004 Pontiac Vibe

1 Answer

2003 pontiac vibe p0420 code

most catalytic converters last the lifetime of the vehicle my best bet would be to go the cheapest way first and check your egr valve and o2 sensors

Jan 15, 2010 | 2003 Pontiac Vibe

1 Answer


You will need to use obd2 scanner to reset light after parts are replaced. It's the only way.

Aug 17, 2009 | 2005 Pontiac Vibe

1 Answer

My 2004 pontiac vibe check engine light just came on. car has 150,000 miles. what could be the cause?

There are to many things that can cause the check engine light to come on. Best thing to do is to go to Auto Zone and get the Car ecm scanned for the DTC codes which would indicate the issues to why the check engine light is on. It could be as simple as a bad gas cap and needs to be replaced and if that is the case, make sure your get one from the dealer and not a generic gas cap. It could also be a bad O2 sensor and Auto Zone can give you the step by step instructions to replacing the old O2 sensor with a new on with common tools and they do have that part for sale. Good luck and keep me posted, be glad to answer any more questions you may have.

Aug 04, 2009 | 2004 Pontiac Vibe

2 Answers

Pressure Control Solenoid "D" Electrical

You need to take it to a reputable repair facility. The pressure control solenoid needs to be checked for proper operation. If the solenoid is operating properly, the PCM (Powertrain Control Module[computer]) will need to be replaced. If you continue to drive the vehicle with this condition the transmission will eventually destroy itself.

Jan 28, 2009 | 2005 Pontiac Vibe

Not finding what you are looking for?
2004 Pontiac Vibe Logo

Related Topics:

366 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts


Level 3 Expert

80339 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides