Question about 1993 Dodge D150

Open Question

How do i change the heater core in a 1993 dodge d150 gas powered truck

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 43 Answers

SOURCE: heater core

18901fc.gifHere is an exploded view of the heating/air conditioning blower box. This contraption is located on the passengerside under the dash. I've changed heater cores on other cars but never worked on a caravan so not sure how difficult it'll be. You may need to remove a few cover panels to access this and the heater core #22 is located behind the distribution box #6 containing parts 7-18 and hopefully comes off as a unit. I wouldn't want to put it back together just looking at the pic. You may just need to remove the heater tube cover #4 to access the connections and slide out the core.....NAH couldn't be that simple!!! Hope this was of some help. Good luck.













Posted on Oct 23, 2008

Ad
  • 1 Answer

SOURCE: how to change a heater core

Once you pull the dash out and get the old core out. If you have a copper one take a tubing cutter and cut the tubes in half that go through the firewall.Grt yourself two half inch copper couplers.Run the two pieces through the fire wall then drop the core in place connect then solder. If aluminum similar cut then flare both ends then connect with rubber heating hose and clamps and away you go. Then you don't have to disconnect air conditioning.

Posted on Jan 25, 2009

  • 154 Answers

SOURCE: 95 dodge dakota heater blower not working

It has been a long time since I've replaced one of those. From what I remember you don't have to go through pulling the heater box out. You do need to remove the glove box assembly. Look up under the passenger side of the dash. If you see the bulge of the motor/cover hanging straight down then remove the cover and the motor will be there. If you don't see that then te motor is mounted horizonally. If that is the case then the fresh air door assembly will need to be removed and it is behind that.
Here is a quick check to see if the motor is bad. Thump the bottom of the heater box by the passenger's feet. if the motor comes alive or makes noise then it is bad. Also check the fuse and make sure that it doesn't work on any speed. (the resistor would prevent operation on only one speed or more but generally not all speeds)

Posted on Apr 05, 2009

  • 1 Answer

SOURCE: cooling system requires burp.

Hey Tim,

I had the same problem with my 1997 Dodge ram 5.2 liter truck. I changed the water pump and it was actually that little o-ring on the heater hose that fits into the water pump on the top right side of the water pump. Also that metal piece on the return heater hose erodes after a while and rusts because it fits inside the water pump. I changed the metal part of the heater hose and the o-ring. I even changed the thermostat because it was easy to access. After I changed all of that I still heard the water running when I would rev the engine. After further investigation, I found that my bypass hose was leaking. The leak was small so I didnt see water on the ground and when the engine was hot it would just evaporate. Changing the bypass hose was more difficult than the water pump. You have remove so much just to get at a 3 to 4 inch hose. After I changed it, I filled up the radiator AGAIN and left the radiator cap off for about 10 minutes and added coolant as the level dropped. It worked, no more water running sound. Hope this helps.
AJ

Posted on Apr 07, 2009

  • 323 Answers

SOURCE: 1999 dodge durango heater core

It's a big job. Drain the coolant down, recover the freon in the ac system and disconnect the lines and heater hoses. Lower the steering column, remove the instrument panel assembly, remove the heater housing. Split the case halves on the housing and there you are. Usually around 500 to 700 dollars at a dealership.

Posted on May 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can you let me see the vacuum diagram for a 1993 dodge ram


Seriously, dude...you just made my day! Anyway, the best I can do without engine size is this link.
GET 25 GIFT CARD FOR EVERY 100 SPENT ON ONLINE SHIP TO HOME ORDERS

Nov 26, 2014 | 1993 Dodge D150

1 Answer

I have a 1993 dodge d150 318 getting spark and has fuel pressure but wont run. what could it be?


Sounds like your timing chain may have broke or jumped a tooth sorry for my spelling that is where I would check next hope this helps

Mar 12, 2013 | 1993 Dodge D150

1 Answer

1993 caravan 3.3 heater gets a little warm not warm enough


Before replacing the heater core. make sure its the problem. Disconnect the hoses from the heater core and take a garden hose and try to run water thru it. if water flows thru it then its not the heater core. it could be the valve that stops the flow of coolant into the heater core.

Nov 12, 2011 | 1993 Dodge Caravan

1 Answer

Just bought a BWD speed sensor for my 1993 Dodge d150. It came with a new wiring harness. Do i have to change it? The old sensor was working fine just leaked fluid everywhere.


i had same problem same truck. the fix is do not use the bwd or any other aftermarket speed sensor!! they will all leak,dodge came out with the upgraded one with internal seals to stop this in late 1993,cause too many were leaking. the upgraded part# is 5013660aa,it has a white colored inside body your original is all black,that is why you have to change the little wir harness they give you. look this up will help you also (TSB 21-14-94).
this up grade was only done by dodge so all the aftermarket ones are junk.

Apr 02, 2011 | 1993 Dodge D150

1 Answer

Removal and replacement of a heater core in an 84 dodge d150 -with a/c-


get a Haynes Book for this truck. has step by step and some pictures. about 15 bucks at any auto parts house.

Dec 27, 2010 | 1984 Dodge Pickup 4WD

1 Answer

I have a 1993 dodge d150 318 no spark or no power to fuel pump could it be the crank sensor?


A BAD CRANK SENSOR WOULD NOT CAUSE A LOSS OF POWER TO THE FUEL PUMP. ARE U SURE ABOUT THAT, THE FUEL PUMP ONLY RUNS FOR 1 SECOND WHEN THE KEY IS TURNED ON UNBLESS ENGINE IS STARTED. DO A FAULT CODE TEST ON THE COMPUTER, GO TO THE WEB LINK FOR INSTRUCTIONS AND A FAULT CODE LIST, VERY EASY TO DO.
http://www.extreme-check-engine-light-codes.com/Chrysler%20OBD1%20Decoder.htm

Sep 24, 2010 | 1993 Dodge D150

1 Answer

I am trying to replace my heater core in my dodge d-150 with air. I have removed the glove box and loosend the dash but now what


The heater core is in the middle of the black box ,you will need to take your dash loose and raise it up or take it all the way out to be able to get to everything,also you will have to unhook you a/c lines to remove,good luck,

Aug 30, 2009 | 1984 Dodge D150

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

172 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...