Question about 1988 Toyota Pickup

1 Answer

'88 4runner shift problem

About 2 months ago I installed a new clutch and it was fine for a couple days then it started slipping one day.I added some gear lube,blead the clutch and sprayed some carb cleaner in the bell housing threw the clutch fork boot to clean off the oil that appeared to be leaking in there.After doing all that it was grabing good and drove fine up until a few days ago it was 15 to 25 below zero for 3 days,I had to jump it.After I got it started I put it into gear and released the clutch pedal and it did not grab.I crawled under it why somebody pushed the pedal to see if the slave cylinder was working and not frozen,it was working.Next I pushed the truck to see if it wasin gear or not,it rolled free,Iput it into gear and pushed again and it was still rolling free.I cannot get it to engage.If you have ANY ideas please share I am at a dead end.

Posted by on

  • Rick Byrd
    Rick Byrd May 11, 2010

    this isn't a 4wd that got into neutral at the transfercase by chance ??

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 6,674 Answers

You say you added gear lube. Where did you add the gear lube, to the differential? Because if you added gear lube to your master cylinder for the clutch, I think we found your problem. It calls for brake fluid.

Posted on Feb 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2009 ford mustang v6, standard, will not accelerate, no matter in which gear I am in why?


Sorry old son but your clutch sounds like it has gone to the big junk yard in the sky reserved for dead clutches . When a clutch starts to slip it will continue to do so until that is all it will do . solution a new clutch is required .

Nov 19, 2013 | Cars & Trucks

1 Answer

My 2000 ford focus does good, til i change into 2nd gear, then from 2nd through 5th gears, it jerks and barely runs. and when it gets real bad, it causes the clutch to slip, what could be the cause of...


So you can race the engine in neutral, and no problem with it trying to die? If that's so, I think you need a clutch job. A clutch disc contaminated with oil or grease will cause jerking and slipping.

Sep 14, 2012 | Ford Focus Cars & Trucks

1 Answer

Ok so i have a 2000 elantra and the clutch keeps slipping. the issue started after i got the car figured it needed a clutch so i had one put in. to my surprise i get a call saying that the clutch was...


It might be the flywheel make sure there are no oil leaks and clutch isn't contaminated does the gearbox select gears ok when it starts to slip before you re-bleed it?

Aug 12, 2012 | 2000 Hyundai Elantra

2 Answers

The clutch slips in first gear when it is hot.


You need a new clutch again. Sorry to give ya the bad news. This time make sure they put a new transmission seal in so fluid can not leak onto the clutch plate and ruin it.

Apr 25, 2010 | 1999 Jeep Wrangler

2 Answers

Manual Shifting problems


Did you put the correct fluid back in the transmission? If it is too heavy weight oil it will cause the synronizers to stick.

Oct 09, 2009 | 1994 Chevrolet S-10

1 Answer

Trouble going in to gear


Do you have to add fluid every so often?

Mar 11, 2009 | 1993 Toyota Pickup

1 Answer

Clutch slipping on 93 Honda Accord


there is no adjustment, replacement needed

Dec 29, 2008 | 1993 Honda Accord

1 Answer

98 Ford Explorer wont move in reverse or overdrive


Probably low oil pressure in the transmission or worn clutches.

Mar 09, 2017 | 1998 Ford Explorer

Not finding what you are looking for?
Cars & Trucks Logo

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6880 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...