Question about 1994 Toyota Camry

Open Question

94 camry vacuum hose diagram

I had to replace all the vacuum hoses because a lot were cracked and I thought there was a vacuum leak but now i can't remember how to put it back together... doh! Can someone please help me out with a picture or something?

Posted by Anonymous on

6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 1596 Answers

SOURCE: I need the vacuum diagrams for a 1984 Toyota 4x4 22r engine

try to send did you get em ?

Posted on Jan 13, 2009

  • 1861 Answers

SOURCE: New Motor, Heater not working, Leaking Antifreeze

Your car is overheating because you did not bleed the cooling system. The hanging hose may be the overflow drain. Unbolt the coolant reservoir, and raise it as high as you can. Start the motor, and add coolant until the heater starts blowing heat. You will see air bubbles in the reservoir until all of the air is out. This is a common procedure when doing any cooling system maintenance on Celicas.

Posted on Feb 22, 2009

  • 14 Answers

SOURCE: I have rebuilt the motor and now having problems


Posted on Apr 10, 2009

SOURCE: where can i find a vacuum hose diagram for 1996

i have provided the vacuum hose diagrams for Toyota Camry model.Can you please tell us the reasons for you searching the diagram?.We are ready and happy to help you!. Please rate my solution as helpful.2a4b72e.gif104d8cb.jpg

Posted on Feb 27, 2010

  • 2382 Answers

SOURCE: 99 Camry idle was surging

Hi, vacuum leak at the intake manifold or vacuum hose can cause a high idle. On carbuerated vehicles the idle adjustment screw may be set to high. On fuel injected vehicles, the Idle Air Control(IAC) circuit or valve may be faulty. On newer vehicles you may be able to get a trouble code to help pinpoint the problem.

Posted on Apr 12, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Complete diagram of all the hoses and where they go on a 96 toyota camry 2.2 l 4-cylinder

Have a look through this website. You will find diagrams for vacuum hoses in a different file to water or hydraulic hoses.

Jul 13, 2017 | 1996 Toyota Camry

1 Answer

I have a 94 dodge carvan i change spark plugs and took off the intake cover and now it runs rough

  • With engine running listen for a whistle indicating a vacuum hose leak. It is easy for a vacuum hose to pull loose while removing replacing plugs.
  • Check for spark-plug leads . You can check at night and look for spark.
  • Remove and check each spark plug. The ceramic tops are easy to crack.
  • Check the spark gap, hitting or picking up residue on the tip is common.

Dec 01, 2015 | Dodge Cars & Trucks

2 Answers

How to know if i need to replace the idle control vavle

This could be due to

- faulty ignition leads leaking spark
- worn spark plugs
- cracked distributor cap
- vacuum leaks at the intake plenum, large flexible air intake hose, or small vacuum hose
- EGR valve faulty

If you do suspect the IAC valve (it was a common culprit in Corollas for instance) then see here for procedures p212

The EGR valve is on p153

Oct 10, 2014 | 1998 Toyota Camry

1 Answer

1988 Camry vacuum diagram all hoses I have one hose no connection?

Hi there, this is not a diagram for a 2.0L. Can someone provide the diagram for a 2.0L Automatic Camry model year 1988?

Sep 03, 2014 | 1988 Toyota Camry

1 Answer

2.2 ltr toyota camry has bad vibration at idle but runs smoothly under load

I am chasing this problem also in my 94 Camry. I am investigating

- vacuum leak somewhere in the intake manifolding or hose
- EGR valve malfunction
- IAC valve malfunction
- deteriorated spark plug leads
- head gasket leak
- fuel pressure low from pump
- malfunctioning fuel pressure return or relief valve

Aug 13, 2014 | 1995 Toyota Camry

1 Answer

Diagnostic code P1294 says target idle speed not reached. The first probable cause said it was a vacuum leak. After following the vacuum diagram I found a line coming from the bottom of the purge sole

There are so many vacuum hoses on this vehicle that finding a vacuum leak will be difficult. Most likely, if the hoses look in good shape the leak is at one of the many connectors. Pull off one at a time and reseat it but first check the end of each hose for cracked rubber...a small crack can play havic with vacuum sensing!

Dec 28, 2012 | Cars & Trucks

2 Answers

2006 mazda vacuum leak

Doesn't sopund like vac leak. Need to check computer codes. Some parts stores will help check code for free, like O'Reillys, etc. My GUESS is coolant temp sensor, which is usually inexpensive easy fix. But you NEED to get code checked to find out for sure.

Jul 03, 2017 | 2004 Mazda 3

1 Answer

Hi- I have a volvo v70 automatic, this fault comes and goes.....the engine idle is very eratic and also not always at the same time there is a terrible whistling noise from the engine. Thanks Phil

Sounds like you have a leaking vacuum line. If it has a hole or is cracked, it will leak or **** air causing the idle to be erratic. The vacuum lines or hoses should be traced down for any cracks or dry rot and replaced. The heat from the engine and the emissions causes the hoses to break down and a lot of people don't realize these should be replaced. The vacuum lines or hoses coming from the intake area is the main area to look at.

Jun 05, 2010 | 2000 Volvo V70

1 Answer

Took my car to a parts store and was told i had a vaccumm leak so now i need a diagram to find the leak

I am assuming they scanned the codes and pulled the code associated with the check engine light? And this is what told them you had a vacuum leak? Is the vacuum leak associated with any type of system like your ac isnt working properly or something or the car is running poorly? You can inspect most of your vacuum hoses without a diagram and you can use a mighty vac to test them to make sure they are good. Just visually inspect them and look for cracked and damaged hoses and replace them.

Apr 08, 2010 | 1997 Chevrolet Cavalier

1 Answer

Where can i find a vacuum hose diagram for 1996 camry 2.2

i have provided the vacuum hose diagrams for Toyota Camry model.Can you please tell us the reasons for you searching the diagram?.We are ready and happy to help you!. Please rate my solution as helpful.2a4b72e.gif104d8cb.jpg

Feb 27, 2010 | 1996 Toyota Camry

Not finding what you are looking for?
1994 Toyota Camry Logo

Related Topics:

176 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides