Question about 1987 Dodge Ram Wagon B250

Open Question

Ball bearings fell out of valve body?Need diagram to replace?

Posted by on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 131 Answers

SOURCE: I REMOVED THE VALVE BODY

Those are valve body check balls and they must be put back in the proper place for the transmission to function properly. Try not to panic. If you look closely at the passages in the valve body, you will probably notice that some of the them have small indentations beside them. If you find passages with this difference in the same number as the check balls, then install them and then install the valve body by lifting it straight up and carefully aligning it with the transmission housing before making contact with it. Good luck with your effort. I hope this information has been helpful and thank you for trying Fixya.com.

Posted on Jun 21, 2011

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1997 isuzu rodeo transmission valve body ball bearing location


that will take a real isuzu full transmission FSM book.
or from the true maker, see that tag on the tranny?
it answer that. on most cars.
will say like Aisin mfg company model x. or ????????

there are 2 choices.

Mar 23, 2015 | 1997 Isuzu Rodeo

1 Answer

4l60 valve body diagram


http://ls1tech.com/forums/attachments/automatic-transmission/267989d1291997474-4l60e-valve-body-4l60e-vb.jpg There is also a check ball that goes in the case next to the 2-4 accumulator. google it if you are not sure.

Jun 03, 2014 | 1997 Chevrolet K1500

1 Answer

CARBURATOR OF NISSAN 1400 BAKKIE


the ball bearing will be a non return valve for the accelerator pump. When the pump is moved to suck in fuel from the bowl it lifts of the seat and when the pump is pressed down the force of the fuel closes it off and the fuel is squirted in to the manifold.

Jan 19, 2014 | Nissan Cars & Trucks

1 Answer

Ball Bearing Replacement


Ball bearings or ball joints? Ball joints do go bad about that milage on your truck.

Feb 20, 2013 | 2006 Ford Explorer

1 Answer

Valve body replacement


you will be ok if you do not open the valve body but, if you do: be carehul to not loose the small ball bearings that block fluid flow as; you will not be able to shift the trans: if you do not know how to repair the valvebody please jut replace it with a new one: may i ask; what was/is the transmission problem you are attempting to repair by changing the valvebody?

Feb 18, 2013 | Cars & Trucks

1 Answer

Put a ball bearing back in a high pressure oil pump


If it fell out then it can't do it's job which is to regulate the pressure within the pump and is "shot."

Aug 27, 2012 | Ford Cars & Trucks

1 Answer

Need diagram assembly for valve body of 1999 dodge caravn (spring and berring location)


I have several diagrams for the valve body on your 1999 Dodge Caravan including a complete expoded view and diagrams showing valve, spring, and check ball locations. However, I cannot post them here due to size restraints and copyright issues. If you would like to sign up for my premium services, I will be happy to get them to you.

Dec 03, 2011 | 1999 Dodge Caravan

1 Answer

I REMOVED THE VALVE BODY TO INSTALL A NEUTRAL SAFTY SWITCH AND WHEN I DID THREE I GUESS BEARINGS FELL OUT. I DON'T KNOW WHERE THEY GO.


Those are valve body check balls and they must be put back in the proper place for the transmission to function properly. Try not to panic. If you look closely at the passages in the valve body, you will probably notice that some of the them have small indentations beside them. If you find passages with this difference in the same number as the check balls, then install them and then install the valve body by lifting it straight up and carefully aligning it with the transmission housing before making contact with it. Good luck with your effort. I hope this information has been helpful and thank you for trying Fixya.com.

Jun 21, 2011 | Dodge Grand Caravan Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...