Question about Cars & Trucks

1 Answer

My remotes stooped working on my 1999 Chrysler cirrus 2.5L. I disconnected the battery to do replace a CPS sensor and after I connected everything back I got a red security light on and no remotes wo

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 6 Answers

Have you tried to self program fob;switch ignition on as if starting but not starting,hold fob near to the keys and press open/close,doors should lock and unlock.If they do'nt you will need to program fob and require security code!

Posted on Jan 08, 2013

  • Falco16 Jan 31, 2013

    No go on the self program
    I took the car to a lick smith and he tried to program it but the car would not take the code. I checked all fuses and are good

×

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 5280 Answers

SOURCE: CPS crankshaft position sensor for a 1999 Chrysler Cirrus 2.5l v6 How do u get to the sensor and what is the steps to take to get it installed It is located in the back of the back of the engine. T

Here is info on a '96 Cirrus with same 2.5L engine. Check to see if same as yours.http://www.autozone.com/autozone/repairinfo/repairguide/repairGuideContent.jsp?pageId=0900c1528008987d

Posted on Dec 30, 2012

alicantecoli
  • 22156 Answers

SOURCE: I had to disconnect meg battery term to do work on my 1999 Chrysler cirrus v6. 2.5l and when I reconnected every thing my remotes did not work and I get a steady red security light comes on 5 sec. Af

Try disconnecting the battery again and join the leads together for half hour then reconnect the battery and try again ,might work as this is standard procedure i use on may vehicles that have been parked a long while and the battery has gone flat ,

Posted on Jan 03, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 chrysler cirrus tachometer works right then will drop to zero and not work


Sounds like the tach is either bad and should be replaced or there is a short or loose connection to or from it. Check the wires in and out of it. If it's in the dash, though, it won't be easy to get to. Good luck.

Apr 28, 2014 | 1999 Chrysler Cirrus

1 Answer

1999 Cirrus battery loses charge when car sets.


Here is a neat trick for that problem (my 1999 Cirrus drain issue could not be solved) Disconnect the negative cable for a minimum of 5 seconds, then reattach it. Doing this before you go to bed insures a charged battery in the morning. It is when the engine is turned over that the battery drain begins again (probably the anti-lock brake motor) Try not to perform this too often, as it will mess with the oxygen sensors over time, which reset their data from the power disconnect. Oxygen sensors in this car gather their needed data from about 40 miles of regular driving, and it is recommended to drive the car often to engage these sensors occasionally. The car might drive slightly rougher after the battery disconnect because these sensors are not fully activated. They determine crucial fuel / oxygen ratios to deliver to the engine and its components...

Feb 16, 2013 | 1999 Chrysler Cirrus

1 Answer

I had to disconnect meg battery term to do work on my 1999 Chrysler cirrus v6. 2.5l and when I reconnected every thing my remotes did not work and I get a steady red security light comes on 5 sec. Af


Try disconnecting the battery again and join the leads together for half hour then reconnect the battery and try again ,might work as this is standard procedure i use on may vehicles that have been parked a long while and the battery has gone flat ,

Jan 03, 2013 | Cars & Trucks

1 Answer

CPS crankshaft position sensor for a 1999 Chrysler Cirrus 2.5l v6 How do u get to the sensor and what is the steps to take to get it installed It is located in the back of the back of the engine. T


Here is info on a '96 Cirrus with same 2.5L engine. Check to see if same as yours.http://www.autozone.com/autozone/repairinfo/repairguide/repairGuideContent.jsp?pageId=0900c1528008987d

Dec 30, 2012 | Cars & Trucks

1 Answer

Getting no spark from plug wires


hey had the same problem buddey its the egnition modul controlls the spark on all car and truck easy and cheap fix bud on the bottom of distributar

Dec 18, 2012 | 1999 Chrysler Cirrus

4 Answers

99 chrysler cirrus lxi won't shift out of 2nd, no speedometer


Had the same problem on my 1999 cirrus lxi. Replaced the output speed sensor on the tranny and topped off the tranny fluid... cleared the check engine light and the cirrus ran great. Caution...the output speed sensor reqires removal of the front left tie and plastic weatherproofing to replace. once you find it's locvation, the replacement is relatively easy.

Oct 30, 2009 | 1999 Chrysler Cirrus

1 Answer

1999 CIRRUS WON'T START!!!


Right area. If it is a 2.4L, replace them. If it is a 2.5L, you need a distributor most likely.

Jun 18, 2009 | 1999 Chrysler Cirrus

1 Answer

1999 Chrysler Cirrus Lxi 2.5l high rpm


The throttle position sensor may be misaligned. This tells the computer how much throttle is being applied, and when they go bad, or come out of alignment, the idle tends to get up there. If that's not the issue, remove your air cleaner, the housing and everything until you get to the MAP sensor. Give it a good spray with carb cleaner, let it dry and replace the air cleaner with a new one. If the MAP sensor detects minimal air flow, the computer jacks up the idle to compensate.

Nov 07, 2008 | 1999 Chrysler Cirrus

1 Answer

1999 chrysler cirrus


Check the coil packs, or the Ignition module. Disconnect the harness to the ignition module. And test the leads to see if there is current. I don't know what the specs should be, but it will be minimal. Never overlook fuses either.

Jul 04, 2008 | 1999 Chrysler Cirrus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...