Question about GMC Safari
Hello and I apologize for any inconvenience this may have caused. My 2000 GMC Safari has a couple of issues but the one that worries me is that when i cold start the vehicle the temperature gauge takes longer than usual to get to normal heat temperature, what can i do to improve warm up on my family mobile?
Your thermostat may be stuck in the open position. The original thermostat is a 195 degree. Your engine should be warm enough to blow heat in 5 minutes of idling or driving.
Posted on Jan 07, 2013
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
i went under for driver side then i took off passenger side wheel you also have to remove two bolts that are holding dipstick tube in place it is easy to get them from the wheel well on passenger
Posted on Nov 17, 2008
SOURCE: 1994 gmc safari,no heat
sounds like a blend door problem gm uses plastic clips to hold actuator rods that tend to break easiest thing to do is take it to a shop that offers free heater checks. and let them check it out
Posted on Jan 16, 2009
SOURCE: 2000 GMC Safari anti-lock brakes
There was actually a recall for this. Go to your local GMdealer and have them check your VIN for a recall. If not under recall get out of there its easy to repair yourself don't let'em fool you.Remove the front pads caliper and rotors. Locate the abs sensor mounted to the wheelbearing assembly by a small socket head cap screw (Allen wrench). Removethe bolt and softly gently/wiggle the abs sensor around until it pops upout of the hole. some will break, which is why it wouldbe nice if the recall applies to your vehicle that way if they break gm replaces. Once you get both sides removed, clean themounting surface of all rust or build up with w-d 40 and small steel toothbrush then wipe off excess with clean rag and mild soap and warm water, dry completely make sure no spray residue exist on parts, Next apply a thin layer of lubricant grease to preventfuture rusting and reassemble.The rust build up under the sensor is causing the angle to change resultingin inaccurate wheel speed readings in the abs module your abs module will interprets this asa wheel is either slipping or skidding and applies your abs. This should make you happy with no more irritations. Please rate me. If you need further assistance you can always ask me. Good luck with this.
Posted on Apr 25, 2009
Check for a bad temperature sensor. To check it, remove it first. Using an ohmmeter measure its resistance, which should decrease when dipped in hot water. If the the resistance remain high and doesnt change then you know it is bad, and you don't end up wasting money on buying one when it is still good.
Posted on Aug 12, 2009
Tips for a great answer:
Jan 27, 2016 | Cars & Trucks
Aug 30, 2015 | GMC Cars & Trucks
Nov 10, 2013 | 2000 GMC Safari
Apr 09, 2011 | 2000 GMC Safari
Hello and Welcome to FixYa.com
Are both heater hoses hot i need to know this to go on??
Thank you for using FixYa.com
Regards, Lee Davidian
Your FixYa Expert
Jan 15, 2011 | 2003 GMC Safari
Oct 16, 2010 | 2000 GMC Safari
Jun 03, 2010 | 1999 GMC Safari
Sep 09, 2009 | 2000 GMC Safari
Jul 30, 2009 | 2000 GMC Safari
Jan 05, 2009 | 2000 GMC Safari
May 16, 2018 | 1984 GMC S-15 Jimmy
117 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: