Question about GMC Sierra 1500

1 Answer

How to replace the dimmer switch on 2004 GMC Sierra

Posted by Anonymous on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How to remove fader switch 2004 gmc.

Posted on Jan 14, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 59 Answers

SOURCE: 1997 GMC Sierra Ignition Switch Replacement

take off the cover on the top and bottom of the steering column just behind the wheel. pop the tilt lever out simply just by grabbing it and give it a good tug. then once you have the new switch and you get in there your going to need an inverted torx socket to remove the small bolts that hold the switch to the column. do not move the gear on the new switch make sure it lines up exactly as the old one did!!!!!!!!!!!!

Posted on Mar 15, 2009

  • 198 Answers

SOURCE: 2004 gmc sierra rear differential

remove cover.take off back wheels and calipers (or drums).turn differential to where you see small bolt/pin (5/16) horizontally (same direction as axles)on right side of differential.remove bolt/pin.A large pin (about 5"long 3/4"diameter) should slide out differential with ease ( you may have to tap one side of the large pin).turn differential to completely remove large pin.turn differential so you can see in the view window.push each axles in (they'll go in about 1 1/2"each) You may hear one of the axle C-clips fall.If not use a small telescoping magnet to remove the C-clips from the axles through the differential window.pull each axle out about 10"so they are out of the diff.Now remove the cap bolts(4-5/8"bolts) and remove the caps(mark the caps so they go in excactly the way they came out.be careful the diff might fall out.If not you may have to use a long bar or 2x4 to wedge and pry the differential out. Have a basket/crate w/rags in it to catch the diff.TIP:If you are removing the ring gear from the diff, the bolts are left handed bolts meaning you have to turn them clockwise to loosen and counter clockwise to tighten ; )

Posted on Sep 15, 2009

Testimonial: "thank you helped ALOT perfect instructions "

  • 1509 Answers

SOURCE: 2004 gmc 1500 sierra heater control stuck on

Defrost is the default position. Is the control a autyomatic temperture control unit? ( you set the temp and select automatic) if it is the system is completely electronic. You push the buttons and the control still says defrost or can you select something else and the control shows it but it just keeps coming out the defrost? If the control changes and the air comes out the defrost anyway and the cheack engine light isn't on, then the problem can be blown fuses or an air door actoater not working. Does the dash emit a clicking sound? if it does with the covers off the bottom of the dash reach around touching the different pieces till you touch the idem that is clicking. this is an acutor motor, or blend door motor. they have gears in them that wear out and break the motors aren't repairable and you just replace the ofending motor. the door that is moves can be stuck. and may have to be freed up with blaster, WD40, or other rust buster till it moves easy. maybe after getting the door to move smoothly you can get the old motor to move the door wiithout having to install a new one.

Posted on Jan 06, 2010

Molson02536
  • 3854 Answers

SOURCE: 2004 GMC Sierra 4dr truck. the fan does not work

The switch or the wire harness at the blower motor has gone bad. The highest setting 5 has no resistor, so the blower runs on high but the high current flow ends up burning up the switch's contact on that setting or the resistor wire harness at the blower motor has gone bad. Common would be the switch it self, if the switch is good. Then it's going to be the wire leads at the speed resistor by the blower motor under the glove box by the passenger leg compartment. Keep me posted, be glad to help you get your Sierra running 100% again soon.

Posted on Jan 06, 2010

autotherapis
  • 501 Answers

SOURCE: 2004 GMC Sierra 2500 HD. Drivers side mirror was

You should be able to replace the glass, but I believe it is glued in place. You should be able to tell as you remove the old pieces. It is a special white glue.
I was able to get a great price for the whole mirror on ebay. even the ones with signals and heated.

Hope this helps

Posted on Jan 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does 2004 gmc sierra 3/4 ton have weight sensor in front seat for airbag


Quite possibly it does . try sitting something heavy on the seat and see if it actuates it

Jan 15, 2014 | 2004 GMC Sierra

1 Answer

1998 GMC Sierra has running lights and high beams but no low beams. Headlight switch is not the problem


first off, be sure your low beams aren't both burned out. it happens all the time. next check your dimmer switch operation. (i'm betting on low beams burned out) good luck.

Dec 21, 2010 | 1998 GMC Sierra

1 Answer

2001 GMC Sierra headlights won't come on. Located 3 each 10Amp fuses that were blown and replaced them, however, headlights didn't come on.


what fuses were blown and replaced? Theres a TBC fuse under the hood, along with a Headlamp Relay. Theres a R HDLP and LT HDLP fuses, make sure they are getting power, and are good. If the LT HDLP and RT HDLP fuses are good AND getting power, then the TBC fuse and the relay is good. then I would suspect the Hi-Lo dimmer switch bad. The LOW beam ground wire is YELLOW, the high beam ground is PURPLE. see if high beams work, if they do, then I suspect the dimmer switch is bad.

Dec 17, 2010 | 2001 GMC Sierra Crew Cab

1 Answer

2004 GMC Sierra 2500 HD. Drivers side mirror was


You should be able to replace the glass, but I believe it is glued in place. You should be able to tell as you remove the old pieces. It is a special white glue.
I was able to get a great price for the whole mirror on ebay. even the ones with signals and heated.

Hope this helps

Jan 09, 2010 | 2008 GMC Sierra 2500HD 2WD

1 Answer

I have a 2002 GMC sierra 1500. Instrument Lights Not Working


When dash lights don't work odds are the tail lights don't work either.Sounds like Dimmer switch may be a problem.

Oct 02, 2009 | 2002 GMC Sierra 1500

1 Answer

2004 gmc sierra 5.3. AC not working AC Compressor fuse blowing


UNPLUG THE A/C CONNETOR ON THE A/C COMMPRESOR. REPLACE THE FUSE AND TURN ON THE SWITCH. FUSE OK . REPLACE THE COMMPRESSOR AND THE RECIVER DRIER.

Apr 17, 2009 | 2004 GMC Sierra

1 Answer

Headlamps for a 2006 gmc sierra aren' t working


i would try replacing headlight switch....

Jun 08, 2008 | 2006 GMC Sierra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

215 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...