Question about Mazda 2

Open Question

How to replace front light bulbs mazda 2 capelo 1.4d manual

Posted by on


5 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: How do you replace the head light bulb on a 2004 Mazda 6?

This is a problem - I had both drivers and passenger bulbs go on me and came at it through the wheel arch. The method is the same for both sides.

Equipment needed

Short handled Phillips screwdriver
2 x Latex gloves - to save scratches and dirty hands

Use 1 glove to save your hands
Lift bonnet to get as much light on the job as you can
Turn wheel in so you can get at wheel arch liner unmolested
Remove the plastic nuts – don’t loose them
Peel back liner – you can now see the back of the lens cover
You may need a torch, I did
Turn cover and pull it away – you can now see back of bulb
Remove clip, noting the way to the comes out, there is a notch on the base of the bulb and the replacement must go in that way

Use clean glove to handle bulb, keep to base of bulb and not the glass

Replace is the reverse of the above

Allow 30-45 mins first time

Posted on Nov 17, 2008

  • 6674 Answers

SOURCE: Can't remove bulb from socket/housing to replace plate light

Spray a little penetrating spray like WD-40, down into socket, give it a couple of minutes and wiggle from side to side & pull & see if that works.

Posted on Mar 27, 2009

  • 1 Answer

SOURCE: i need to know how to replace a burnt out front

I found after about 30 minutes that it was necessary to remove the batter to give more access to the light. try the other bulb first to see how it goes in and out

Posted on Jan 14, 2010

  • 2 Answers

SOURCE: Remove 2003 MAzda 6 parking light bulb

Posted on Feb 13, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a 2008 Mazda 5 minivan how do I change the headlight bulb

Headlight Change 2006-2010 Mazda 5 - CarCareKiosk
This free video shows how to change a burnt out headlight on a 2009 Mazda 5 Sport 2.3L 4 Cyl.. Complete instructions for replacing a head light bulb on a 2009 ...

Low beam head light bulb replace 2000-2006 Mazda Mpv ...

? 5:11
Jun 29, 2013 - Uploaded by hp11208
Low beam head light bulb replace 2000-2006 Mazda Mpv .... My step dad and I successfully replaced a headlight yesterday! :-) ...I've lost it trying to replace the bulb. if anyone can let me know I would really appriciate it thanks ! ..... 5:00. Cleaning your IAC to fix rough idle on 2000 or 2001 Mazda MPV ...

Nov 29, 2015 | Mazda Cars & Trucks

2 Answers

Replace front light in mazda 3

Might have to remove the entire light assembly to gain access to the bulbs. Check with your local dealer or look it up on YouTube for a video.

Aug 26, 2014 | 2005 Mazda 3

2 Answers

How to replace brake light bulb on 2003 Mazda 2

Youtube dude, Step by step show how.... good luck...

Jun 07, 2013 | Cars & Trucks

1 Answer

Hi how can i replace my Mazda ^ 2006 headlight bulb ?

You can open the hood and you should be able to see the headlight compartment, right between your radiator on the front. Most Mazda's have a plastic cover on them. Simply turn the cover or pull it out. The light bulb is inside that compartment. Hope that helps you.

Jan 10, 2011 | 2004 Mazda 6

1 Answer

How to: Replace high-mount brake bulbs Mazda MPV 2002

It will be either on the outside with 2 small screws or more likely you need to remove a trim/cover of the top headliner area... If still in doubt goto or phone the dealer and just ask the parts dept person to show it to you...

Jan 28, 2010 | 2002 Mazda MPV

1 Answer

Signal lights flash faster than normal, back signals work front ones do not, front lights work when head/parking lights turned on.

The fast signal flashing indicates that you have a burned bulb (or one of the bulb elements is burned).
Based on your saying it's the front one on the side your flasher control is set when the signal light flash faster

By a new bulb light and replace the faulty one
hope it will help

Dec 28, 2009 | Mazda B2200 Cars & Trucks

2 Answers

How to replace a front headlight bulb on a 2008 Mazda 3

for the most part you open the hood and turn the socket and the bulb come out if you have an autozone near you they will install it if you get the bulb from them and thats about any auto parts store

Dec 17, 2009 | 2008 Mazda MAZDASPEED MAZDA3

2 Answers

Need to change headlight on 2003 mazda rx 6

If it is the headlight itself. There may be a cover or shroud on the front of the engin bay. Remove that, may be a combination of clips and screws. If it does not cever the light area, it is even easier. There will probably be 3 screws or nuts, remover these and unplug the electrical to the light. From there you should just be able to pop the light out of place. If you are just replacing the bulbs. Where the power goes into the assembly, turn the clip, may be grey in color and pull out of the headlight assembly and replace the light bulb. But don't touch the new bulb the oils from your skin will damage the bulb.

Apr 22, 2009 | 1994 Mazda MX-6

1 Answer

Can't remove bulb from socket/housing to replace plate light

Spray a little penetrating spray like WD-40, down into socket, give it a couple of minutes and wiggle from side to side & pull & see if that works.

Mar 24, 2009 | 2001 Mazda Tribute

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

559 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts


Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides