Question about 1992 Toyota Corolla

Open Question

Where is the map sensor located on a 1992 toyota corolla

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1861 Answers

SOURCE: 1992 toyota corolla

Sorry, was not available at your time. Since the blue light comes on, this tells me that the hi-beam fuse is good. Go to the pass side headlamp, and, behind it, remove the connector for the inop bulb, and remove the bulb. Examine the filament on the bulb. Is it broken in half? If so, you need two hi-beam bulbs. Get back to me if you need more info.

Posted on Oct 21, 2008

angelo63
  • 129 Answers

SOURCE: 1992 toyota Corolla Temp gauge does not work

find the wire that goes to temp sender and apply earth to it turn ignition on the temp gauge should read hot if it does replace water temp sender if gauge dose not move gauge needs replaging

Posted on Jan 26, 2009

  • 1861 Answers

SOURCE: MAP sensor wiring to ECU

There are 3 wires from the MAP to the ECU

Brown is E (Ground)

Yellow is VC to VCC (sensor to ECM)

Light Green with a Red tracer is PIM to PIM

Posted on Feb 10, 2009

michael_grey
  • 365 Answers

SOURCE: My speedometer and odometer stopped working. Where

Her yo go and thanks for letting us know it was a DX model.a0f3855.jpg

Posted on Jun 18, 2009

  • 299 Answers

SOURCE: 1992 Toyota Corolla CV Joint

You can pick up an entire re manufactured axle assembly at your local auto parts store. In order to replace the assembly you will need to disconnect the tie rod end and the ball joint. Remove the spindle nut. Push the axle stub out of the hub. Now with a suitable container under the axle to catch spilled fluid pry the axle from the transmission housing. Install is the reverse of removal. For more detailed instructions and diagrams go to www.autozone.com vehicle repair guides.

Posted on Oct 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1993 toyota corolla 1.8 liter on highway lose acceleration car dies get jump go 7 miles same thing, then does just fine for a month and does it again. brain.voltage regulator?


Please check the following:
- Scan the system and read the live data.
- Fuel pump pressure. (38 - 44 psi).
- Fuel filter for clogged.
- Regulating valve.
- Non Return Valve for clogged, located at the top back of fuel tank on the chassis.
- MAP sensor.

Aug 16, 2014 | 1993 Toyota Corolla

1 Answer

1992 toyota corolla running rich


run fault codes to determine if O2 sensors are at fault. Check MAF/MAP sensors Replace air filter. Have a pressure test done on the fuel manifold to check for excessive injector pressure. Check injectors are working correctly and that the seal at the tips is good

May 21, 2014 | 1992 Toyota Corolla

1 Answer

Were is map sensor 1993 corrola


The auto part stores can tell you as they have a parts locator. More than likely the map sensor is not the problem. Often the problem is a failing ignition control module/amplifier or the failing crankshaft position sensor.

Aug 06, 2012 | 1993 Toyota Corolla

1 Answer

1994 toyota corolla 1.8 automatic runs good on idle but stumbles when accelerating


The Toyota of your year is equipt with a map sensor,it is located on the firewall with a vacuum line leading directly to the intake manifold, This sensor measure engine load and adjust fuel accordingly.This is definetly the problem,make sure the vacuum hose did not come out,Look at the underhood emission sticker for it,it Toyota has a different name for it it might be called boost sensor or pressure sensor.

Mar 18, 2012 | 1994 Toyota Corolla

1 Answer

92 corolla with VAF code 31 acts like MAF sensor is bad; car bogs when accelerated, stalls cold. But there is no MAF-I confirmed this with the dealer. What is malfunctioning?


Your corolla doesn't use a MAF sensor, it uses a MAP sensor

The map sensor is located on the Intake Manifold right by the throttle body. That could easily be causing the issue you're stating.

Mar 01, 2011 | 1992 Toyota Corolla

1 Answer

1990 toyota corolla crankshaft and camshaft sensors where are they located


hello.i had about 10 of these corollas from 1988 thru 1992.i also performed all of the mechanical work on them.these cars with the 1.6 4afe engine,to my knowledge,DO NOT come equipped with either a crank or camshaft sensor.i hope this information helps you.take care and good luck, manny

Jul 11, 2010 | 1990 Toyota Corolla

1 Answer

Where is the map sensor of my 1985 toyota corolla? tanks.....


Probably on the firewall. It's a small black device with 2 small hoses going to it. About the size of a small box of wooden matches.

Jul 31, 2009 | 1995 Toyota Corolla

1 Answer

MAP sensor wiring to ECU


There are 3 wires from the MAP to the ECU

Brown is E (Ground)

Yellow is VC to VCC (sensor to ECM)

Light Green with a Red tracer is PIM to PIM

Feb 09, 2009 | 1995 Toyota Corolla

1 Answer

High idle when warmed up 2000 toyota corolla


may have vacume leak .unpluging map sensor will set a code light.

Jan 01, 2009 | 2000 Toyota Corolla

Not finding what you are looking for?
1992 Toyota Corolla Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...