Question about 2004 Dodge Ram 2500

Open Question

Replace back brake pads of 2006 dodge ram 3500 diesel

How to take out caliper on the rear 3500 dodge diesel

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 323 Answers

SOURCE: replacing front and rear pads

yes

Posted on Apr 21, 2009

  • 66 Answers

SOURCE: 2006 dodge ram 2500 4x4 diesel replace brake pads front and back

Straight forward job. Remove wheels, remove 2 caliper bolts per wheel, check bolts,and bushings for wear/corrosion and lubricate, remove calipers, remove brake pads, push caliper pistons into calipers, replace anti-rattle clips, put new pads in, put caliper and bolts in, put wheels on. Start truck and press brake pedal several times to take up slack and you're done.

Posted on Jun 02, 2009

  • 37 Answers

SOURCE: how to replace rear brake pads on 2006 dodge

replacing brake pads is pretty simple but because the results of not doing it correctly is pretty severe (can you say accident) I recomend you get a Haynes manual for your vehicle. Generally they can be purchased for approximately $20 at autozone. The basics for replacing brake pads (as opposed to brake shoes) is to losen the brake caliper so it can be moved up off the brake rotor. Then the old pads pop out. Next the brake caliper piston is pushed back into the caliper and the new pads fit in. Now the caliper is placed back over the brake rotor. Again, get the manual.

Posted on Feb 11, 2010

alicantecoli
  • 22095 Answers

SOURCE: how do you replace rear brake pads on 2007 dodge

undo the other two bolts that hold the caliper support bracket on ,simple

Posted on Jul 22, 2010

RaidX
  • 632 Answers

SOURCE: I cant get the old pads out of my 2006 dodge 2500

You need to use a piece of wood and a hammer, To knock the calliper out the way and brake pads will be easy to remove, If they are stuck just wack em out if your replacing them anyway.

Posted on Jul 31, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1999 dodge ram 3500 Diesel 4x4 and I go threw front pads and rotors. It sings when I'm driving down the road that the brakes are on could it be the master cylinder


YES IT COULD BE, BEST TO JACK VEHICLE UP AND SPIN WHEELS TO SEE IF THEY ARE BINDING.
IF SO CHECK CALIPERS WHERE PADS FIT SEE IF SEIZED ON SLIDERS.
ALSO CHECK FLUID LEVEL IF TO HIGH THE FLUID CAN NOT RETURN WHEN NOT PRESSED + SEE IF ITS BLACK FLUID NOT CLEAR, SIGNS OF CYLINDER FAILIURE

May 16, 2012 | 1998 Dodge Ram 3500 2WD

1 Answer

Dlpehow to replace rear rotors on a 2001 dodge 3500 diesel


Don't do it before you have to - but if you've got to here you go . . .
HINT: You have to pull both rear axles so make sure you've got plenty of side clearance and clean area to lay the interior axle parts on - to keep from contaminating upon rebuild. An impact wrench is needed as well as a large spindle socket. Measure the spindle nut then go purchase your socket. I don't think you can do this job w/o it as you will mess up your parts if you beat it off.

DISASSEMBLY:
1. Raise and support the vehicle
2. Remove the tire and wheel assembly
3. Remove the disc brake caliper
3.1 Remove top of Master Cylinder and keep open
3.2 Compress the disc brake caliper w/C clamp & wood block
3.3 Remove the caliper pin bolts
3.4 Remove the banjo bolts (replace the copper washer upon reinstallation)
3.5 Use coat hanger to support caliper assy out of way
4. Remove spindle nut
5. Remove axle shaft out of axle housing (if dually) - pull it straight out. Be careful not to ding the interior spline on the way out.
6. Remove hub and rotor assembly

[Note: It's a good time to replace parking brake pads too. You're right there.]

REASSEMBLY:
Is the reversal of dis-assembly and removal. Make sure you use new copper washers for your banjo bolts upon reassembly). Good luck.

Sep 12, 2010 | 2001 Dodge Ram 3500 Truck

1 Answer

I cant get the old pads out of my 2006 dodge 2500


You need to use a piece of wood and a hammer, To knock the calliper out the way and brake pads will be easy to remove, If they are stuck just wack em out if your replacing them anyway.

Jul 31, 2010 | 2004 Dodge Ram 2500

2 Answers

How to remove the rear brake rotor on a 2006 dodge ram 3500 dually


Single rear wheel - Remove both caliper bolts.. remove caliper and pads.. remove rotor.. they are usually rusted on pretty good.

Rear Dually- the rear rotors are mounted with the hub assembly.. you must first remove the rear axles.. then remove nut holding load on bearings.. then the rotor and hub assembly will come off as one unit.. removed rotor from hub..

Mar 23, 2010 | 2006 Dodge Ram 3500 Truck

1 Answer

How to replace rear brake pads on 2006 dodge sprinter 3500


replacing brake pads is pretty simple but because the results of not doing it correctly is pretty severe (can you say accident) I recomend you get a Haynes manual for your vehicle. Generally they can be purchased for approximately $20 at autozone. The basics for replacing brake pads (as opposed to brake shoes) is to losen the brake caliper so it can be moved up off the brake rotor. Then the old pads pop out. Next the brake caliper piston is pushed back into the caliper and the new pads fit in. Now the caliper is placed back over the brake rotor. Again, get the manual.

Feb 10, 2010 | 2006 Dodge Ram 3500 Truck

2 Answers

2003 Dodge Ram 3500, my front left wheel is making 'scraping' sounds, as if the brake pads are worn down and the tabs are 'scraping' but every once in a while there is a grinding sound. Have taken brakes...


It's possible that the bearings need replacing if haul loads on a regular basis. Take a look at the complete hub assembly, this is not an uncommon issue with Dodge Rams. If you need diagrams and procedure info, here is a cheap factory service manual for a 2003 Dodge Ram covers every bolt from front to back.

Sep 27, 2009 | 2004 Dodge Ram 3500 Truck

1 Answer

2006 dodge ram 2500 4x4 diesel replace brake pads front and back


Straight forward job. Remove wheels, remove 2 caliper bolts per wheel, check bolts,and bushings for wear/corrosion and lubricate, remove calipers, remove brake pads, push caliper pistons into calipers, replace anti-rattle clips, put new pads in, put caliper and bolts in, put wheels on. Start truck and press brake pedal several times to take up slack and you're done.

Apr 25, 2009 | 2004 Dodge Ram 2500

1 Answer

Help with changing fron brakes on a 2006 dodge ram truck


After you have removed the caliper from the caliper mounting bracket, remove the pads and guides.  Make sure you have fully depressed the caliper's piston fully then you can start by putting the little guides back in then reloading the new pads back in the caliper.  Be sure to use some caliper grease on the caliper mounting bolts (the bolts that hold the caliper in place).  If you don't use grease on these mounting bolts, your caliper won't slide right and you can have uneven wear on your pads.  This could easily cause overheating.  Once you place the caliper back in the mounting bracket and tighten the caliper mounting bolts back down tight you are all done.  Put your wheel back on and tighten the lug nuts and you're done!
MAKE SURE WHEN YOU FIRST START THE TRUCK FOR A TEST DRIVE AFTER INSTALLING THE BRAKES, YOU NEED TO PUMP THE BRAKES BACK UP!!!!  IF YOU DON'T YOU WILL START DRIVING AND HAVE NO BRAKES!!!  PUMP YOUR BRAKES ABOUT 10-15 TIMES FULLY OR UNTIL THE BRAKE PETAL SEEMS FIRM.  ALLOW THE BRAKE PETAL TO COME ALL THE WAY BACK UP BEFORE PUMPING THEM AGAIN.

Feb 02, 2009 | 2006 Dodge Ram 3500 Truck

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...