Question about Mercedes-Benz 190-Class

Open Question

Horn not working on a mercedes sprinter 313 cdi.

I checked the fuses and wiring and all seems to be ok. Removed the steering wheel and cleaned the contact ring and still not working. Also replaced the horn unit but still not repaired. Any ideas. Thanks.

Posted by on

2 Suggested Answers

  • 51 Answers

SOURCE: merecedes sprinter 313 cdi. horn not working.

The wiring loom that runs down the front near the radiator and intercooler is prone to rubbing and corroding and shorting out. Check this loom.

If it is in bad shape i'd recommend replacement as the turbo boost sensor wiring and some of the headlamp wiring is in this loom also, and these can cause costly problems and cause the turbo to fail if not replaced.

Posted on Mar 28, 2009

bunnydawg
  • 5158 Answers

SOURCE: (Steering Rack ,ball joint ,tie rod end and

fastest most reliable way to find out what parts are interchangable is to call your local wrecking/recycling/junk yard.... they have books that deal with that issue.

Posted on Dec 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Esp light on sprinter 313 2011 cruise control works now and then any clues thks


check the wheel speed sensors wiring and reluctor rings, the electronic suspension system is part of the abs system, the cruise also uses speed signal from the abs system, sounds like you may have a broken link lead to one of the front wheel speed sensors which makes and breaks connection when you move the steering, wheel good luck

Oct 25, 2016 | 2011 Mercedes-Benz Sprinter

1 Answer

Checking automatic transmission fluid level in mercedes benz sprinter 313 cdi no dipstick supplied.


I don't know why they did this, But other manufacturers are going this way. The consumer can't check the transmission fluid. They have to go to a shop. You can get the stick online. Yours at operating temps are 16 to 17, or 160 to 170, depending on the stack you get. The stick is cable with a metal piece on the end. Push it down until it bottoms out. If you shove it to far/ force it. You have to remove the oil pan to get it out.

May 21, 2015 | Cars & Trucks

1 Answer

Horn not working on sprinter van


I have the same fault in my 313CDI.
By pushing the alarm button the horn works.
Sometimes the horn worked intermittently so I suspect the wiring/ contacts on the steering wheel?

May 01, 2012 | Mercedes-Benz Sprinter Cars & Trucks

1 Answer

Where is th feul cap on the sprinter 313 cdi


Do you have the owners manual? Check in it, if not head to your local mercedes dealership

Jun 24, 2011 | Mercedes-Benz Sprinter Cars & Trucks

1 Answer

How to change a fuel filter in a sprinter 313 cdi 2005


I have trouble starting my 313 cdi van. Its a 2003 model. When I spray ether into the air filter, it starts. I know the glow plugs need replacing, but even on warm days it wont start. Any ideas?

Nov 25, 2010 | Mercedes-Benz Sprinter Cars & Trucks

1 Answer

We have a 2002 Mercedes Sprinter LWB 313 CDI campervan. It has no power up hills and we can only get up them in 2nd gear. Help please


check air filter, fuel filter, and spark plugs in that order. make sure you check all fluid levels too.

Apr 26, 2010 | 2002 Mercedes-Benz C-Class

2 Answers

(Steering Rack ,ball joint ,tie rod end and suspension) compatibility of Sprinter 312D and Sprinter 311 Cdi Sprinter 313/ CDi or any new model sprinter


fastest most reliable way to find out what parts are interchangable is to call your local wrecking/recycling/junk yard.... they have books that deal with that issue.

Dec 03, 2009 | 1994 Mercedes-Benz C-Class

1 Answer

Horn not working-----Found strange reason.


if there is a scre in there anywhere check if its an earth point if it is get a wire & a connector & wire it up !
shouldnt be too dificult just make sure it wont bind up anyhwere in there!
Cheers Rob.

Jul 20, 2009 | 1995 Buick LeSabre

1 Answer

Merecedes sprinter 313 cdi. horn not working.


The wiring loom that runs down the front near the radiator and intercooler is prone to rubbing and corroding and shorting out. Check this loom.

If it is in bad shape i'd recommend replacement as the turbo boost sensor wiring and some of the headlamp wiring is in this loom also, and these can cause costly problems and cause the turbo to fail if not replaced.

Jan 20, 2009 | 2006 Dodge Sprinter

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

534 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

yadayada
yadayada

Level 3 Expert

63801 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...