Question about 1992 Mazda 323

Open Question

Timing belt installation for ford laser kj 1994 twin cam

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

agent91
  • 2100 Answers

SOURCE: how to remove timing belt/head for gasket

Is this an over head cam? Must be if it has a timing belt. OK, Pull everything off that is in the way, take fotos if you have to remember where everything went, air filter, intake, dist? anything, everything. Fan in the way? Timing cover, Expose the belt, highlight the timing marks on the cam and the crank, put the mark on the belt as well, Pull off rocker cover, Look underneath cam for head bolts, If the cam has to come off, Mark it with a white pen or a junk yard marker, Do not let it move from its position, Pull the cam, pull the head bolts, pull the head off. Check it for flat, see if it got hot and warped. If it did, you will need to get it planed. You might as well get it checked out while you got it off. Get a new gasket on there, no adhesive, no silicone, no glue, dry. You are supposed to use new bolts, but we'll let it slide. They cost about $50. Torque it down according to spec and pattern, Put the cam back on, align the marks, put the belt on, It should line up with the mark, or better yet, it has to. Set the tension on the belt, put the covers back on, you could crank the engine over by hand to make sure it is OK, then put it all back together, to make it easy to spin by hand, pull the spark plugs out. Get all the fan, air filter, intake, wires, cables, etc back on there, check the foto, fire it up. Hope this helps.

Posted on Oct 05, 2010

  • 200 Answers

SOURCE: 1994 Mazda E2000 Cam Timing Mark Positions to

Chech here. http://www.freeengineinfo.com/mazda-timing-belt-replacement.htm

Posted on Aug 30, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 jeep liberty motor-2.4 chain driven component below crankshaft need to find if position matters and how to time


no photos. so help will limited .
all cam timing matters.
"not sure what does", the cam, crank, sprocket or pin?
The 2.4L inline 4 engine, is a throw back old Dodge Neons
DOHC engine ,a twin cam head.
2002 is first year, Liberty in USA>
is this the 2.4L turbo engine, EDZ engine.??
KJ jeep it is.
be nice to say what job your working? HOw'd you get here?
if you buy the service manual from jeep
chapter 9s, covers this 2.4 total engine, in one chapter.
but this engine cams are Belt drive. NOT CHAIN.
first post that it really is, this engine? or the VIN, or photos.

so you must be confused on that is there.
the other engine, the 3.7L is a V6 engine vastly different than the 4 banger.
it has chains.
covered in chapter 9- page 71 +
this v6 has a counterbalancer too.
i recommend reading the FSM book on this engine , after counting cylinder, 4 or 6? and reading chapters 9 or 9s.

see KJ 2002 here
RTM read the manual
seen here
http://colorado4wheel.com/manuals/Jeep/KJ/

Oct 29, 2016 | 2002 Jeep Liberty

1 Answer

Where is the water pump on a Ford KJ Laser?


The water pump on the 92 Laser is easily replaced. You just need to untension the the belt driving the bump. Once you have done that all you need to do is undo the bolts and take the pump into your local auto parts dealer. Now that you have the pump install it and retension the belt.

U actually have to remove alternator belt and powersteering/a/c belts, then remove timing belt cover, remove timing belt adjuster, and slide timing belt off top pulley, making sure you mark it before removing it, so as to put it back in same position. Next, unbolt 2 bolts at bottom of water pump (this is a bit fiddly, but doable, then, undo water pump, replace with new water pump, being sure to use gasket cement, aswell as new gasket, which should be supplied with pump, then put it all back together, in reverse order of removal. Fill cooling system, check for leaks, and voila, u have done it :)

Check this at ehow.com

Nov 09, 2010 | Ford Laser Cars & Trucks

1 Answer

Cam belt timing 1994 Isuzu trooper big horn


no timing, cam belt must be installed corectly inorder to have right timing.

Oct 03, 2009 | 1994 Isuzu Trooper

2 Answers

I need instructions on how to change timing belt on Ford laser 1995 KJ model please


it basically the same with the other engines...as long as you know what parts to remove. Just make sure that before you remove the belt/s and tensioner/, the timing marks are in the right place. I have changed timing belts without instructions...experience is needed though. I suggest better get a service manual to be sure if this is your first time.

Aug 10, 2009 | Ford Laser Cars & Trucks

1 Answer

Whow to set the timing belt on ford focus 2000 1.6 L twin cam


IF I WERE YOU I WOULDN'T ATTEMPT THIS IF YOUR NOT MECHANICALLY MINDED AS YOU COULD DAMAGE VALVES IF MISTIMED ANYWAY YOU WILL REQ TIMING PIN & LOCKING BAR FOR CAMSHAFT FOR THESE.

Jan 03, 2009 | 2000 Ford Focus

1 Answer

2.0 L Timing Belt Marks


hi if its a twin cam ford engine you wont find marks on the cam pulleys.what you have to do is take off the cam cover and look at the back of the cams you will see slots in them ,what you have to do is you can buy the timing kit for the engine at the main dealers or you can make you own using a flat piece of metal 5mm thick and100 mm long this fits into the two slots at the rear of the cams to lick them in place and th crankshaft pulley mark should be in line also.best of luck.

Sep 30, 2008 | 1999 Ford Escort

5 Answers

2000 ford focus twin cam timing


please helpme i need timing marks for ford focus 2000 16 valvs

Sep 11, 2008 | 2000 Ford Focus

Not finding what you are looking for?
1992 Mazda 323 Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...