Question about Dodge Dakota
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If you have the silver-metal valve cores, on the rims, there is NO reset proceedure. Under the valve cores is a transmitter, which is battery powered. It sends a "yes/no" signal to the tire pressure ECM. Note that ALL 5 tires transmit to the ECM. The signal is "at or above" the specific target pressure needed, or is is below the target pressure. What to do: get a GOOD tire pressure gauge, not those cheap ones that look like pencils. Set the tire pressures to the specification, INCLUDING the spare. Your light should go out. If not, there is the possibility that one of the sensors is innoperative, and that will involve a trip to the dealership, to get it replaced under warranty. Try the tire pressure resetting, adn don't forget the spare. Get back to me if this works. Glad to help, and thanks for choosing FixYA.
Posted on Nov 11, 2008
SOURCE: LOW TIRE PRESSURE WARNING LIGHT
Turn ignition to run position,go to fuse panel right hand of vehicle,push and hold reset button for 5 seconds,low pressure light will flash 3 times,start car it should turn off the low pressure light.
Posted on Jan 29, 2009
SOURCE: low tire pressure idiot light
Your nissan also has a tire monitor on your spare tire if your spare has low pressure and the other 4 tires have correct pressure the light will stay on . after you ajust the spare also the light should go away.
Posted on Mar 24, 2009
Do not..DO Not disconnect the battery ever!
it wll cost you a trip to the vw shop to re set the computer.......
bin there done that $46.00
Posted on May 04, 2009
Reset the tire pressure warning, same as you would any service issue. Insert key in ignition, hold wrench button and min button, then start engine.
Posted on Jun 08, 2009
Tips for a great answer:
Oct 03, 2016 | 2008 Lexus ES 350
Jan 17, 2011 | 2008 Nissan Rogue
Nov 14, 2010 | 2008 Toyota RAV4
Nov 18, 2009 | 2008 Nissan Rogue
Oct 09, 2009 | 2008 Hyundai Elantra
Oct 05, 2009 | 2008 Hyundai Elantra
Sep 30, 2009 | 2008 Toyota Tacoma
46 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: