Question about 2006 Ford Bantam 1.6i

2 Answers

Guys I've got a problem with a ford bantam 1.6i 2003 model rocam engine, its overheating even though the cylinder head was skim but it still overheating. please assist!

Posted by on

  • Nissan Master Technician 89

    You should probable also check the water circulation i.e. water pump, radiator, thermostat, heater control valve etc...

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Ford Master
  • 45,531 Answers

Check what head gasket was used . I suspect that an after market gasket was used. If that is the case there will be holes in the block and head thet have no matching holes in the gasket thereby causing the problem

Posted on Jan 07, 2013

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 95 Answers

Was the water pump changed the impeller on the inside is plastic and can crack over time and break up

Posted on Jun 26, 2016

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: I HAVE AN FORD BANTAM

Anyone with a solution yet?

Posted on Nov 01, 2011

emissionwiz
  • 76846 Answers

SOURCE: diagram how to replace fan belt on ford bantam rocam engine 1.6

Here is the diagram I show.
9_28_2012_8_40_43_pm.jpg

Posted on Sep 28, 2012

  • 3 Answers

SOURCE: ford bantam rocam 1.6i speedo,temperature gauge and rev counter not working

Sometimes when the batery of vehicle goes flat or when u fit a new car batery to the bantams they love to give that problems like gauges not working rpm not working speedo not working and cluster display is dead, u disconect the batery termanils and for example fit positive termanil and arc. Or short til that blue spark occur then u swop around negative on and arc positive,leave the ignition switched on arc til gauges move!! Don't ask me why but that happend to me! A autoelek friend of mine showed me this! NB don't tri this with vehicles with a lot of elektric featers it can cause demage to ecu (engine control unit)

Posted on Oct 16, 2012

  • 108 Answers

SOURCE: overheating on ford bantam

there are three probable causes that may result to overheating one inadequate circulation of coolant within the cooling system. The radiator is clogged with dirt some stems are closed.try to flush the radiator using rad flushing fluid. Second improper bleeding of trap air within the cooling system. Third the water pump blades are worn out inadequate circulation of coolant.

Posted on Feb 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where are the speed sensor situated on a Ford Bantam 1.6 rocam


It is plugged into the transmission where the speedo cable would go in older cars.

Jun 22, 2016 | 2008 Ford Bantam 1.6i

1 Answer

2005 Bantam Rocam. Why won't it start?


have a compression test done as there may be bent valves from refitting the head and cam shaft/s incorrectly

Oct 13, 2015 | Ford Cars & Trucks

1 Answer

Will a 1.6 Ford Bantam Rocam motor fit onto a 1.3 Ford Bantam Rocam gearbox, and is the engine mounting brackets the same


same engine, same year only difference is bore size so there is every chance that it will fit.

Jan 25, 2015 | Ford Cars & Trucks

1 Answer

How do I replace a timing belt on a Bantam 1.6i XLT


if it rocam engine it does not have a belt it runs on a chain

Aug 20, 2014 | 2008 Ford Bantam 1.6i

1 Answer

Ford bantam rocam-big end bearing torque settings


Write your answer...please can give me torque settings for ford bantam 1.3 rowcam cylinder head.
Amos

Jul 23, 2013 | Ford Cars & Trucks

1 Answer

Need diagram of the correct route for ford rocam fan belt on aircon models


i am looking for a fen belt diagram for ford ikon 1.6 2003 recom

Nov 26, 2012 | 2006 Ford Bantam 1.3i

1 Answer

On a 2006 1.3 Rocam. After a broken heater hose, the engine overheated, and I didn't notice until the bakkie lost power. I replaced the head gasket, with no success. The engine still overheated.


Have you checked to see if your fan is working ?
After performing your repairs, did you bleed the coolant system ? One way is to run vehicle with heaters running to make sure that air in the heater core / hoses is bleed.

Jun 17, 2017 | Ford Taurus Cars & Trucks

Not finding what you are looking for?
2006 Ford Bantam 1.6i Logo

1,726 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...