Question about 2002 Chevrolet TrailBlazer

Open Question

What fuse number for rear window wiper 2002 trailblazer 4.2 6 cyl

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 54 Answers

SOURCE: Wipers on 2002 Trailblazer wont shut off.

Prolly a bad wiper control module. Locate you wiper motor, remove the plastic houseing and replace the curcuit board.

Posted on Jan 19, 2009

Ad
  • 28 Answers

SOURCE: Licence plate(rear)(Tag) lights are out on 2002 Chevy Trailblazer

when you put your parking lights on they should come on, if not you must replace them.

Posted on Feb 22, 2009

  • 39 Answers

SOURCE: rear wiper motor reaplacement needed 2002 Chevy Trailblazer

use a medium size flat head screw driver and only pry up where there is an clip. there should be quite a few on the back hatch. so if you do break one or two it will still hold together well. and be sure when you change the motor to mark the splines that the wiper goes on so that when you reassemble it the wiper will go all the way across the window and return all the way back down.

Posted on Mar 14, 2009

cadman000
  • 607 Answers

SOURCE: 2002 chevy trailblazer LTZ - where do you fill rear washer fluid?

Uses 1 washer jar up front for both front and rear. Hope this helps

Posted on Apr 22, 2009

as2tbone
  • 1 Answer

SOURCE: 2003 trailblazer rear wiper not spraying

I had this problem too, you have to take the back hatch panel off and reconect the hoses. the hoses are about as big as a drinking straw. it's not hard, but is time consuming.

Posted on May 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 trialblazer rear window wiper inop. changed switch and motor. no power to motor. cannot find relay nor fuse


There are something's involved that you are not aware of , or familiar with . Electronic control modules .
Rear Wiper/Washer System Controls
• Body control module (BCM)
• Liftgate control module (LGM)
• Rear wiper/washer switch
Do you know what a serial data network is ?
Rear Wiper/Washer System Operation
The rear window wiper/washer switch is an input to the BCM. The requested rear wiper mode is sent to the liftgate control module (LGM) by the BCM as a message on the serial data circuit, and the rear window wiper motor is controlled by the LGM. The switch power circuit to the rear wiper/washer switch is a 12-volt reference supplied by the BCM during ignition on, accessory or RAP power modes. The rear wiper/washer switch is a series of resistors and the switch position is determined by the voltage of the rear wiper/washer switch signal circuit to the BCM. The rear wiper/washer switch has continuity at all times and the BCM expects a rear wiper/washer switch signal voltage in all switch positions including OFF. The rear wiper motor is supplied battery positive voltage and ground. The LGM controls rear wiper motor operation through the rear wiper motor control circuit. The rear wiper motor control circuit is supplied a battery positive reference voltage by the rear wiper motor module and is pulse width modulated to ground by the LGM. The duty cycle of the pulse width modulation determines the rear wiper motor operating mode. The liftglass and liftgate ajar switches are inputs to the LGM and must be in an inactive state in order for rear wiper washer system operation to be enabled. When an ajar switch is active the LGM suspends wiper motor operation directly and sends the ajar switch status messages over the serial data circuit enabling the BCM to suspend washer pump operation. The rear window washer pump is controlled by the BCM through the rear washer relay. Battery positive voltage is supplied to the coil and switch sides of the rear washer relay. When the rear window wash request is active the BCM energizes the relay by grounding the relay coil through the rear washer relay control circuit. When the relay is energized battery positive voltage to the relay switch is supplied to the washer pump control circuit.

Your best bet , take it to a qualified repair shop and have it checked for DTC'S - diagnostic trouble codes .
DTC B1017 or B3970
The rear wiper motor is supplied battery positive voltage and ground. The liftgate control module controls rear wiper motor operation through the rear wiper motor control circuit. The rear wiper motor control circuit is supplied a battery positive reference voltage by the rear wiper motor module and is pulse width modulated to ground by the liftgate control module. The duty cycle of the pulse width modulation determines the rear wiper motor operating mode.
DTC B3799

2
Turn the ignition ON.
Operate the rear wiper switch through all the switch positions.
Does the rear window wiper operate normally?
--
YES - Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems
NO - Go to Step 3
3
Install a scan tool.
Display the liftgate control module data list.
Observe the following parameters while operating the respective switches. Refer to Scan Tool Data List for typical values.
• Liftgate Ajar Switch
• Liftglass Ajar Switch
Did the scan tool indicate the correct switch positions?
--
Go to Step 4
Go to Courtesy Lamps Inoperative in Lighting Systems
4
Observe the requested rear wiper parameter in LGM data list.
Operate the rear wiper switch through all the switch positions.
Does the scan tool indicate the correct requested rear wiper parameter in relation to the switch position?
--
Go to Step 5
Go to Step 6

Feb 06, 2017 | 2002 Chevrolet TrailBlazer

1 Answer

What fuse is for the back window windshield wiper


Owners manual will give fuse locations and identifications. These vehicles are notorious for having the wiper motors/pivot seize. Try turning on the wiper motor switch and try moving the wiper arm by hand with a little force in the direction of its travel. If wiper begins or starts to work, replacement of the motor will be necessary

Aug 22, 2015 | 2002 Chevrolet Chevrolet TrailBlazer LS

2 Answers

Where is the back windshield wiper fuse located on a 2002 chevy trailblazer


this might not be the fuse, check the rear door connectors are clean, see if the rear sprayer jet also works or not, the metal contact in the back door, visible when open can get dirty, use a cloth and rub them clean or use a product to such as WD40 to help improve the eletrical contact.

I hope this was useful.

Apr 04, 2015 | 2002 Chevrolet TrailBlazer

1 Answer

Gate light on my Jeep liberty is on, gate is closed and locked


The gate light on my 2002 Liberty was on for a long time and I researched on this site about it but ended up just hitting the trip meter button after starting up and that canceled it out. The other day my rear window wiper was not working and my security system had quit working also. Looking at the book in the fuse section I found that the rear window wiper is on it's own fuse, number 17 in my 2002. I took that fuse out and looked at it and it seamed good, no break or burn marks. I replaced the fuse anyway and low and behold the rear window wiper worked, the gate light went out, and the security system was working again. I could not find a fuse for the security system of the gate light.....they are all on the rear wiper fuse. Problem solved, hope this helps you, I found it purely by accident.

Dec 21, 2013 | 2009 Jeep Liberty

1 Answer

2004 Trail blazer windshield wiper fuse location number


Rear fuse panel (under rear driver's side seat) fuse #33

Dec 29, 2012 | 2004 Chevrolet TrailBlazer

1 Answer

What is the relay or fuse number for dome lights on 2002 Chevy Trailblazer? Please specify the relay or fuse number that requires replacement.


There is no separate fuse for the courtesy lights, the BCM (Body Control Module) has two fuses associated with it. They are located in the rear fuse panel, and are fuse #4 and 40.

Dec 02, 2012 | 2002 Chevrolet TrailBlazer

1 Answer

Rear Window washer ceased functioning, wiper works. Swapped relay with another one, no change. Reservoir is full. Front washer works fine.


Do you hear the pump running when you command the rear washer? If not, check fuse #7 and relay #38 in the rear fuse panel. If the pump is running, then you have either a blockage in the line going to the back or a break in the line.

Sep 13, 2011 | 2002 Chevrolet TrailBlazer

1 Answer

Rear Window Wiper isn't working


if you look under cover for fuses it should tell you witch fuse is for what. there will be coresponding numbers. for all electrical components that are fused. under hood or inside car.

Jan 11, 2009 | 2003 Chevrolet TrailBlazer

Not finding what you are looking for?
2002 Chevrolet TrailBlazer Logo

Related Topics:

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...