Question about Toyota Highlander

Open Question

Changing the EGR valve on a 2005 toyota highlander v6

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 740 Answers

SOURCE: ECT snow feature Toyota Highlander 2005

Turn vehicle on, with foot on brake put vehicle in NEUTRAL. Still holding brakes move 4x4 switch to 4 wheel drive, it should engage. The ECT snow is just s feather that make the transmission take off in 2nd gear so its not a fast take off and you wouldn't skid. Good Luck

Posted on Dec 21, 2008

  • 1596 Answers

SOURCE: 2005 Dodge 1500 code p0404 EGR valve.

The electronic EGR valve and solenoid assembly is attached to the rear of the left cylinder head ,

  1. Remove electrical connector (5) at top of EGR valve solenoid.
  2. Remove tube mounting bolt (1) at intake manifold.
  1. Remove two bolts (4) connecting EGR tube (1) to valve assembly.
  2. Remove gasket located between EGR tube flange and EGR valve assembly.
  3. Remove two EGR valve mounting bolts (5).
  4. Separate valve assembly (3) from engine.
  5. Remove and discard metal gasket located between cylinder head and valve assembly.
INSTALLATION
  1. Clean area at rear of left cylinder head where it joins base of EGR valve.
  2. Clean EGR tube where it joins EGR valve.
  3. Position new gasket between EGR valve and cylinder head.
  4. Position EGR valve to cylinder head. Install and tighten two bolts (5). Refer to Torque Specifications.
  5. Position new gasket between EGR tube flange and EGR valve assembly.
  6. Position EGR tube (1) to side of EGR valve and into intake manifold.
    1. Install EGR tube flange bolt (1) at intake manifold. Tighten bolt. Refer to Torque Specifications.
    2. Connect electrical connector (5) to top of EGR valve solenoid (2).Do a final tightening of two EGR tube bolts (4). Refer to Torque Specifications

Posted on Feb 05, 2009

pcastal
  • 90 Answers

SOURCE: p1135 code 2002 toyota highlander

P1135 is the A/F sensor Bank 1 Sensor 1. Unfortunately, it is the sensor on the back side of the motor, in the manifold against the firewall. Its extremely common, and its not very difficult to replace, just dont try doing it with the motor hot. If you installed an aftermarket sensor, or an Oxygen sensor instead of A/F, you will still have problems. old exhaust gaskets tend to crumble, dont worry, your air mix didnt cause that. Which sensor was replaced?

Posted on Feb 18, 2009

  • 333 Answers

SOURCE: WHERE DO I LOCATE THE EGR VALVE ON MY 2001 CHEVY IMPALA 3.8 V6

The egr valve is located at the end of a hose that plugs into youe valve cover. It is pushed right into a rubber grommet that is located in one of the valve covers. I hope this helps. don.t forget to rate my nswer, thanks

Posted on Feb 27, 2009

  • 116 Answers

SOURCE: egr valve dodge durango

if this is a 4.7l engine, the valve is on the left rear of the intake. loosen the 8mm bolts that hold the egr intake tube to the egr valve, remove the egr bolts, disconnect wiring, remove valve and tube together, attach intake tube loosely to new valve, install new valve, tighten tube bolts to egr using a swivel socket, this is not a 5 minute job, so dont attempt unless you have some time and patience.

Posted on Apr 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is po402 code


P0402 code
- EGR volume control valve stuck open
- Faulty EGR volume control valve
- EGR solenoid valve harness is open or shorted
- EGR solenoid valve circuit poor electrical connection
- Faulty EGR temperature sensor and circuit
Read more: http://engine-codes.com/p0402_ford.html#ixzz3GmcSmjC2

Oct 21, 2014 | 2006 Toyota Highlander

1 Answer

Toyota 2005 highlander reving noise normal rpm


Do you have an RPM gauge?
Probably the transmission is slipping.

Mar 13, 2013 | Cars & Trucks

1 Answer

My check engine and vsc trac off lights are on what could be the problem it's a 2005 highlander/ lights were off when I had smog check done and I failed/ lights came on after I had the smog check done


you probly need new tires or check tire pressure and have align or balance, time for service for your engine, get your engine scan or change sparks plugs and pcv valve

Jul 06, 2011 | 2005 Toyota Highlander

1 Answer

How do you adjust the valves on 2002 Toyota highlander 3.0 v6


You can't, they're hydraulic lifters and are NOT adjustable.

Mar 23, 2011 | 2002 Toyota Highlander

1 Answer

I have a 2005 Toyota Highlander V6 2WD. The car is due for a service (90K). The dealer quoted $340.00 for the service and suggested replacement of the timing belt for an additional $400. 1. Doesn't a...


I guess all services you need is replacement of filters, Oil, spark plugs if not recently changed
Belt replacement is worth at 90K, but price is too high! check this link: http://shop.autopartsfair.com/store/?N=11801+4294962486+1725+9318
it requires one hour work! or even less
other than this, if you have a service light on, either remove battery pole for a while to reset it, or ignore it and will disappear wft. some time!!!

Nov 12, 2010 | 2005 Toyota Highlander

1 Answer

How can i find out 2005 toyota highlander fuel pipe?


Fuel type? Regular unleaded is what mine takes. 2005 Limited V6 Highlander. Good luck!

Sep 23, 2010 | 2005 Toyota Highlander

1 Answer

2003 Toyota Highlander 4 CYL blows black smoke on startup!


most likley its going to be an one of three things if it is a 1MZ-FE engine #1 air flow meter #2 IAC Valve #3 EGR valve hope this helps

Oct 16, 2008 | 2003 Toyota Highlander

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...