Question about Mercedes-Benz E-Class
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Check and see if your alternator is charging
Low voltage will cause those lights to come on, as the computer is shutting down.
To check your alternator you will need a volt meter... WITH the engine running you should have about 14 volts coming out. IF NOT you need to replace the Alternator!
Posted on Apr 19, 2009
SOURCE: BAS ASR problem
ok, first you have to clear the codes.
in this type of cars you cannot clear codes with a regular obd II it has to be the factory scanner or similar. after you clear the codes drive it for a while. when light comes back on scan it again and that is going to be your true problem. if you replaced the switch but didn't clear the code the light will be still on because the computer doesn't know that you fixed the problem. so try it out and let me know if worked.
Posted on May 15, 2008
Hi. this light is a warning that concerns the ABS sensor and mechanism assembly. there is a central module and connecting sensors that are attached to each axle/rotor. If any of the sensors become unstable or starts to malfunction, the main module will detect this anomaly and it will trip the light via, the ECM.
I recommend taking this vehicle in so that the ABS techs can diagnosis this issue and they can pin point which sensor or mechanism is malfunctioning.
You vehicle seems to operate in a normal manner at this point but, you will actually have to be in a hard braking situation in order to experience this malfunctions results. If you where to initiate a hard brake while the ABS system is in safe mode(light on), your vehicle would simply lock up. It would not provide the ABS actions due to this malfunction that is evident at this point.
Please rate and god bless:)
Posted on Apr 21, 2009
Forget the four coils. That is a common problem,but I would question 4 failing.
The ABS ,Parking Brake,Speedo Etc,where nothing to worry about,you were loosing power, when it went to fail safe,so they came up.
ETC -is Electronic Throttle Control, your problem? Maybe
You will need to have a scanner put on it's,daignostic connector under the dash,to check for codes. Them only a trained technician can follow a chart or test proceedure to properly repair.
I have a 2004 LS,one of Ford most high tech and complicated vehicles.
Conclusion: only a professional can repair you car.
I would start with a local shop. If money you have money to throw away,go to a dealer.
Most likely have to wave to it on a flat bed carrier. Don't flat tow it.
Posted on May 29, 2010
SOURCE: the car won't start; lights,
Check the starter and the starter relay or fuse. A client of mines car was doing the same thing, it ended up being two issues, the starter not working anymore, and a relay that was bad. If I am not mistaken everything should be labeled in the fuse box under the hood and will tell you where the fuse/ relay is for your vehicle
Posted on Jun 12, 2011
Tips for a great answer:
Nov 08, 2015 | AC Cars & Trucks
Jul 11, 2014 | 1994 Honda Civic
Jan 26, 2018 | 2008 Dodge Grand Caravan
Jan 14, 2013 | 2005 Ford Five Hundred
May 31, 2017 | 2004 Honda Pilot
Dec 22, 2017 | 2006 Holden Barina
Apr 17, 2012 | Cars & Trucks
Oct 31, 2011 | 2001 Chevrolet Cavalier
Jun 07, 2009 | Mercedes-Benz Mercedes Bentz Actros Semi...
Apr 19, 2009 | 2003 Ford Windstar
76 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: