Question about Cars & Trucks
Need information on how to replace the SHIFT SOLENOID PACK on a 41TE transmission
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If I remember right the 2000 solenoid pack is slightly different than the '96. I've only seen that happen myself once. I just called my local bone yard and got a solenoid pack from the same year of trans. and did it that way.
Posted on Sep 27, 2008
Trans model is the 4L60E,and the shift solenoids are mounted on the valve body,just inside the bottom pan.There are 2 shift solenoids,one EPC solenoid (Electronic Pressure Control)One TCC PWM solenoid (Torque Convertor Clutch,Pulse Width Modulated),one 3-2 kickdown solenoid,and a manifold pressure switch.As far as a shift solenoid relay switch,i have never heard of that.The power for the transmission solenoids comes through the ignition switch ,and uses a fuse,not a relay.Accessing the solenoids only requires dropping the bottom pan,and the valve body does not have to be removed,to change the solenoids.The shift solenoids are the TWO solenoids right side by side and look identical..They are the only two solenoids inside the pan that are in fact identical.Good luck.
Posted on Sep 28, 2008
USUALLY A SHIFT SOLENOID DTC IS REPAIRED BY REPLACING THE TRANS SOLENOID PACK ASSEMBLY..LOCATED ON OUTSIDE OF TRANSMISSION..YOU MUST BE CAREFUL WHEN CHANGING PACK..CLEAN ALL DIRT/DEBRIS FROM OUTSIDE OF PACK..YOU DON'T WANT ANY DIRT TO ENTER TRANSMISSION..SOLENOID IS A SMALL BOX LOCATED ON SIDE OF TRANS FACING FRONT OF VEHICLE..YOU MUST REMOVE TRANS COOLER LINE HOSES FROM FITTINGS ON TRANS..REMOVE INPUT SPEED SENSOR..UNPLUG PACK..8MM SCREW HOLDS IT..3 BOLTS HOLD PACK TO TRANS..YOU MUST CLEAN ALL GASKET RESIDUE THOROUGHLY BEFORE INSTALLING PACK..I'D RECOMMEND GETTING SOMEONE WHO HAS DONE THIS BEFORE IF YOU ARE NOT COMFORTABLE DOING THIS..I HOPE THIS HELPS
Posted on Dec 30, 2009
Tips for a great answer:
Jan 01, 2016 | Cars & Trucks
Jan 15, 2011 | 1999 Plymouth Voyager
Jan 06, 2010 | 2004 Dodge Intrepid
Dec 30, 2009 | 2000 Dodge Caravan
Nov 22, 2009 | 1994 Chrysler Town & Country
Jun 06, 2009 | 1997 Dodge Grand Caravan
May 11, 2009 | 1999 Dodge Caravan
Aug 11, 2008 | 1993 Chrysler Town & Country
117 people viewed this question
Usually answered in minutes!