Question about Audi Cars & Trucks

Open Question

Replace front indicator bulb Audi TT - Audi Cars & Trucks

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

j_del
  • 1586 Answers

SOURCE: Change the Front indicator on an Audi A4 2001

Take out the two Torx bolts on top of the headlight assembly. Then there is a third hidden bolt. Look through the holes in the top front of the fender, above and behind the headlight's turn signal portion (you'll probably need to shine a light in there) and you'll see the third bolt. Remove that and the headlight pulls straight forward and out. Then you can change the bulb.

Posted on Jan 03, 2009

  • 34 Answers

SOURCE: Indicators do not work Although al lamps light when locking Car

Hazard warning light switch fault.
The hazard light warning button in the middle of your dash is actually a relay that often fails, causing this problem. New switch required.

Posted on Jan 22, 2009

bunnydawg
  • 5158 Answers

SOURCE: Indicators not flashing on Audi TT

i believe the audi uses two relays for the turn signals and hazzard lights so it would appear the turn relay has failed. it should be located under the dash near the steer column.... seems to me me they have some shielding under the dash so it may be hard to get to.

Posted on May 23, 2009

JettaRed
  • 7 Answers

SOURCE: Audi TT HID bulb needs replacing

You can change the bulb easily yourself in about five minutes, especially on the passenger side. You may want to disconnect the battery, though I don't know if that is necessary. You may also want to handle the bulbs wearing latex or nitrile gloves so as to not get your skin oil on the glass.

1. Remove the decorative cover that conceals the Coolant reservior. There is a single philips screw near the firewall that holds the cover down.

2. Find the back of the headlight and pull the metal wire clip that holds the back of the headlight cover toward the engine. Remove the cover.

3. Look inside and find the back of the HID bulb--it will be toward the outside fender. Twist the connector until it separates.

4. There is a retainer ring that holds the bulb in. Again, twist that until it comes loose. The bulb should come right out.

5, Put the new bulb in, noticing the notch is on top. Also, attach the retainer ring. It is marked "Top" to help orient it. Reattach the connector with a twist.

6. Make sure everything is firmly in place. Reconnect your battery and test the lights. Finish putting anything else back on.

Good luck.

Posted on Nov 21, 2009

RixsFixes
  • 2200 Answers

SOURCE: How do I reset the radio in an Audi tt 2004? The

Hi

The radio is in safe mode and requires the security code to reactivate it. First check through your service documentation for a credit card sized card that Audi print the code on.

If this is missing the only other way to retrieve the code is

1) Remove the stereo from the dash and retrieve the serial number stamped on the back of the stereo.

2) Contact your Audi dealer with both the serial number and the chassis (VIN no) of your car. You will find the VIN no on your registration document.

3) If you do it this way and have retrieved both of these numbers yourself your Audi dealer will run the numbers and give you the code free of charge.

Hint: Some dealers will attempt to charge for this service but they are not authorized to so. On the original safe code card from Audi it specifically states that if you lose the code your Audi dealer will supply this free of charge. Please ensure to quote this information to the dealer if they attempt to make any service charge.

Hope this helps. Please do rate my answer and thanks for using FixYa.

Posted on Nov 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace brake light on 2005 Audi tt


A very simple procedure - remove old bulb and replace with similar, good bulb.

Feb 04, 2017 | Audi Cars & Trucks

1 Answer

I have a 02 audi a4,i recent replace the turn right bulb and still no working,whats wrong


need more info i.e do you mean indicator front or rear /faulty bulb /fuse /bad connection in bulb holder

Jan 28, 2012 | 2002 Audi A4

1 Answer

Cant find manuel waring light circle with X


Photo of a lamp failure icon on 2001 Audi TT. This is what you should get with the high pixel cluster. Check all car lights bulbs & replace bad bulb(s).

e8f9798.jpg

See also for the next Audi TT model:
54590ef.jpg

Oct 11, 2010 | 2001 Audi TT

1 Answer

I have a 2002 audi tt, the indicators are not working but the hazard lights are still working


check the fuse sounds like that has blown as hazards work on a relay indicaters are off a fuse

May 20, 2009 | 2002 Audi TT

1 Answer

Audi TT HID bulb needs replacing


You can change the bulb easily yourself in about five minutes, especially on the passenger side. You may want to disconnect the battery, though I don't know if that is necessary. You may also want to handle the bulbs wearing latex or nitrile gloves so as to not get your skin oil on the glass.

1. Remove the decorative cover that conceals the Coolant reservior. There is a single philips screw near the firewall that holds the cover down.

2. Find the back of the headlight and pull the metal wire clip that holds the back of the headlight cover toward the engine. Remove the cover.

3. Look inside and find the back of the HID bulb--it will be toward the outside fender. Twist the connector until it separates.

4. There is a retainer ring that holds the bulb in. Again, twist that until it comes loose. The bulb should come right out.

5, Put the new bulb in, noticing the notch is on top. Also, attach the retainer ring. It is marked "Top" to help orient it. Reattach the connector with a twist.

6. Make sure everything is firmly in place. Reconnect your battery and test the lights. Finish putting anything else back on.

Good luck.

Mar 14, 2009 | 2005 Audi TT

2 Answers

Indicators do not work Although al lamps light when locking Car


Hazard warning light switch fault.
The hazard light warning button in the middle of your dash is actually a relay that often fails, causing this problem. New switch required.

Jan 12, 2009 | 2000 Audi TT

1 Answer

2002 Audi TT


Nothing special at all - just remove the back cover on the headlamp and you'll see inside that the bulbs are pinned in place with hinged metal wire clips. Release the clips and the bulbs should come right out.

Sep 15, 2008 | 2002 Audi TT

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

597 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

74945 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14185 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...