Question about Cars & Trucks

Open Question

How to adjust gear linkage on nissan primastar

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 184 Answers

SOURCE: how do i ajust a ford mondeo gear linkage

if memory serves me right you cannot adjust the cables on these cars.

Posted on Sep 25, 2009

SOURCE: nissan primastar clutch

If there is no free play on the clutch pedal that mean the clutch disc have gone ,or adjust the clutch pedal.

Posted on Mar 04, 2010

  • 279 Answers

SOURCE: 06 nissan primastar i can select

This sounds like your clutch plate is no longer making contact,or it has worn to a point where it just slips.You are going to have to take it in to a tranny shop and have it looked at or if you are handy start dropping the tranny out yourself.Replace the clutch and the throw-out bearing at the same time.No one will know for sure whats wrong untill they get into it.Good Luck

Posted on Oct 18, 2010

emissionwiz
  • 75822 Answers

SOURCE: my 1989 nissan maxima wont shift into first or

The clutch n this make model and year is a hydraulic design, it is not adjustable as it is self adjusting. If you have a hard pedal and no free play the clutch disc is worn out and you need a new clutch,.

Posted on Jul 08, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i adjust linkage on a 2004 nissan armada


which linkage? throttle or transmission or padding gear or four wheel drive?

Jul 25, 2014 | 2004 Nissan Armada

1 Answer

Nissan primastar hazard lights flashing for no reason


The switch is not catching, replacement is simple. two torx screws each side of the bottom of gear stick shroud, pop off the shroud and push switch from inside. Replace in reverse order.

Dec 11, 2013 | Daewoo Korando Cars & Trucks

1 Answer

Gear shifter cable


sounds like a stretched gear shift cable or the linkage on the tranny may need some adjusting i would start with the linkage first jack vehicle up and do a visual while some one goes through the gears make sure to use jack stands so that the power wheels are off the ground.....good luck

Nov 09, 2013 | Nissan 200SX Cars & Trucks

1 Answer

Hi having problems starting my primastar in the mornings .i have to pull star it .its as if its not getting diesil i got new glow plugs put in but still no joy


turn the key on my nissan primastar 07, no glow plug light comes up on the dash, result the engine turns over fine but it won't start any suggestions

Dec 15, 2010 | Nissan Pickup Cars & Trucks

1 Answer

The wipers on my nissan primastar are not workin..when i turn them on i can hear the motor working but the wipers dont move..any solutions??


Yep, 100% it will be the linkage has popped apart, you may, if you look get it to clip back together but 9 times out of 10 a new wiper linkage is required.

Regards

Lloyd

Dec 01, 2010 | 2008 Nissan Pathfinder

1 Answer

Nissan primastar.heater direction control stuck.when control knob is turned it springs back.


you need a new cable for the heater controle about £6 on ebay it is a common problem and is changed in about 5 mins you will need a torax driver to fit your dash cover to remove the part of the dash covering the gear leaver / hazard switch

Oct 22, 2010 | 2005 Nissan Maxima

2 Answers

Nissan primastar clutch


If there is no free play on the clutch pedal that mean the clutch disc have gone ,or adjust the clutch pedal.

Mar 02, 2010 | 1994 Nissan Pathfinder

1 Answer

04 Nissan quest will not go into park. It will


Gear linkage either needs adjustment or has a broken part

Jan 27, 2010 | 2004 Nissan Quest

1 Answer

MY RAV4 KEEPS JUMPING OUT OF 5TH GEAR


worn gearbox or engine mounts allowing the gearbox to move and unlatch the shift linkage from its position, or the shift linkage is mal-adjusted and not properly engaged in 5th gear at all.

There may be a knuckle joint that can be adjusted to give correct shifter operation, it may be out of adjustment. GM cars are prone to this after reversing uphill in a manual car, your Nissan may be similar. The engine moves away from the area of the shift lever and pulls the knuckle joint out further than it is supposed to be and causes the gears not to enage securely any more.

Oct 24, 2009 | 2003 Toyota RAV4

1 Answer

Nissan 300zx no reverse or 4th gear.


Hi,
The first place I would look is the shift linkage for wear and a sloppy connection from wear.
adjustments may be made as a possible fix on the linkage rod.
Glad to be of assistance - Please rate the response - I can learn from your rating. Thank you

Oct 27, 2008 | 1990 Nissan 300ZX

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...