Question about Suzuki Swift

Open Question

Remove sump Suzuki swift

2010 1.5 litre re4

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: reassembling gearbox 1995 suzuki swift

Hi,i have a problemh with gare box for my suzuki swift 1996.reg no is p476kov,when i change the gare from first in to the second makes a loud noise,could you help me and advice me how to solve this problem,and if the gare box is broke can u give an estimate price,thanks

Posted on Feb 08, 2009

Ad
  • 142 Answers

SOURCE: Just wondering if 1992 Suzuki Swift is hydraulic

Is yours a SOHC or DOHC?

G13B 1-CAM 16valve (SOHC)
When cold (Coolant temperature is 15 – 25C or 59 – 77F)
Intake 0.13 – 0.17 mm (0.005 – 0.007 in.)
Exhaust 0.23 – 0.27 mm (0.009 – 0.011 in.)

When hot (Coolant temperature is 60 – 68C or 140 – 154F)
Intake 0.18 – 0.22 mm (0.007 – 0.009 in.)
Exhaust 0.28 – 0.32 mm (0.011 – 0.013 in.)

Posted on Jun 13, 2009

  • 4340 Answers

SOURCE: Air intake Problem

It is called a warm up tube. It's purpose is to keep the CARB or Throttle plate area from icing up.

I have witnessed icing at 45 degrees (measured) ambient temprature. The low pressure surrounding the throttle plate(s) makes the area very cold.

If you do not have this tube, or the controls for it are not working, you get wierd stalling, or over rich conditions...Turn car off for few minutes (7-11 stop for example) and restart car...pretso, runs and idles perfect...

Mike

Posted on Nov 25, 2009

Testimonial: "My car is jerking violently, in 2nd gear mainly, and has progressively gotten worse. Is this a gear box problem?\r\n Also, my tiing belt and two fan belst were done recently and now they squeal on start up then go away. Is this a contimination problem of the belts or are they to loose? regards."

ourhowse
  • 2007 Answers

SOURCE: suzuki swift

If you are talking about the brake fluid reservoir, you need to use brake fluid. Not oil.

Posted on Jan 26, 2010

Testimonial: "you were excellent thanks a lots for your help"

  • 701 Answers

SOURCE: what is the correct ignition timing for a 1 litre

Hello sally tyler9: My name is Roger and I will help you. The correct timing for your 1.3 swift engine is 5 degree = or - 1 degree. Should you need further help lease just ask. Please rate the answer. THank You for using Fix Ya. Roger

Posted on Apr 16, 2011

Testimonial: "Thankyou very much Sally"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I fix, bad idle in suzuki swift , check light on, no codes.


the title is contradiction
" check light on, no codes."<< totally wrong
scan it one more time with a REAL scan tool this time. (there are DTC errors , or codes as you said)

what does bad idle mean? misfiring, or idle speed too low
or too high? RPM, or
surging?

say what that means please.
and more important is engine hot or cold ? failing.???? or both????
there are over 50 causes.
but can be broken down to simple physics and gauges.
1: engine bad, lost compression.
2: engine cant breath, dirty air cleaner
3: ISC stuck closed or open or just stuck. (bad idle air supply)
4: bad spark, 1 or all 4 (never had a tune in this decade.
5: cam drive, slipped (belt) causing #1 failure.
6: air fuel mix too lean, and causes rpm drop and ISC fails.
7: air fuel mix too rich and misfires.
8: egr stuck open, it misfires and ISC gives up.
9: cat clogged, engine cant breath #2 like.
10: and the vast other reasons for misfire.

we cant drive it, see it or hear it misfire, so.....????

there is a test for all 10, ask. or get car serviced.

Jul 29, 2015 | 2010 Suzuki Swift 1.6

1 Answer

Where is the fuse for the head and park lights for a 2010 Suzuki swift looked in the one under the bonnet and it's not there


You will have to run down the wiring under the dash on the drivers side suzuki not great as they used so many different harnesses for vehicles that is why they have problems but once you find the wires for the lights it is most likely a wornout pin on a connector

Jul 22, 2014 | 2010 Suzuki Swift

1 Answer

Suzuki swift 1.2 HAT


rtm , read the manual yet< in the glove box,
it answers that.
2010 swift\

lost it , the dealer has it , ask him.
lots of lamps.
no photos.
fail.

Jul 12, 2014 | 2010 Suzuki Swift

1 Answer

How much engine oil is required ?


Swift takes 3.7 litres, according to the manual.

Hope this helps.

May 10, 2014 | 2010 Suzuki Swift

1 Answer

2010 suzuki sx4 no spark on coil


first check all fuses !!!!
Problem with 1996 Suzuki Swift????????????????????? 2010 suzuki sx4 no spark on coil????????????????
SX4? (J20 suzuki engine?)
Japanese automaker Suzuki and Italian automaker FIAT
8 different engines used (world-wide), so post engine option.
usa 3: 2010
COILS:
on all coils?, (you posted 1996 and 2010 at same time)
and swift and SX4 at same time. my guess, is you piggybacked on the swift post with SX4 question, instead of starting a fresh new post?
The SX4 has, COPS are all 4 dead?
it has 4 coils, called COPS. or PACK WITH COILS INSIDE,

IN 2010 we had these optios, which one is yours?
yours is not diesel, as you stated spark. so... down to 2 engine.s
the 2010 model year, SX4 five-door hatchback is available with a 1.6 L DOHC VVT engine, 2.0 L DOHC VVT engine and 2.0 L DDiS diesel engine (16 valve, 135 PS (99 kW; 133 hp) with 320 N·m (240 lb·ft) torque) on the AWD version.
aka: J20A or J20B engines. the B has VVT cam.
my guess? is it's a Suzuki engine in a fiat body?

Nov 28, 2013 | 1996 Suzuki Swift

1 Answer

Where is the horn on my 2012 suzuki swift


I have a 2010 Swift and I believe they are the same build/ design. The horn is behind the passenger side black driving light surround on the front bumper. I imagine that there would just be a black cover if you don't have driving lights.
I just mounted a Jeep Grand Cherokee horn behind the driving light as the stock one is SO wimpy. =)

Dec 06, 2012 | 2010 Suzuki Swift

1 Answer

What is the correct ignition timing for a 1 litre suzuki swift 1995 R reg


Hello sally tyler9: My name is Roger and I will help you. The correct timing for your 1.3 swift engine is 5 degree = or - 1 degree. Should you need further help lease just ask. Please rate the answer. THank You for using Fix Ya. Roger

Apr 16, 2011 | 1995 Suzuki Swift

1 Answer

Replacing the cat on aswift 1 litre and the studs


Use A HADRENED DRILL BIT The Expensive ones are the Only thing that will Work as the Studs Are VERY VERY HARD.

Aug 05, 2009 | 1998 Suzuki Swift

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...