Question about 2006 Chevrolet Tahoe

Open Question

Where is the evap vent valve/solenoid located on a 2005 tahoe?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
csmock132
  • 4669 Answers

SOURCE: getting an error code of PO449 for a check engine

You are right. You need the vent valve not the purge valve. The vent valve is a dealer item. Also this is a common problem and GM has released a bulletin on this that involves moving the location of the valve and running some new lines. It comes as a kit from GM, and it costs about a 100 bucks.

Posted on Dec 02, 2010

Ad
  • 1 Answer

SOURCE: OBD code P0499, P0499 NVLD Canister Vent Valve Solenoid, Cause?

its above ur fuel tank from what i kno of but it could be ur canister or just a short in the wire to ur solenoid

Posted on Jan 17, 2009

c17hydro
  • 2984 Answers

SOURCE: Where is the EVAP vent valve located on a 99

You didn't post your engine size so here is for both. Hope this helps and please don't foget to rate:

Fig. 1: Evaporative emissions control system schematic — 3.4L L32 engine shown

011cd55.gif
b7a598c.gif

Posted on Jul 22, 2009

  • 8 Answers

SOURCE: Evap vent solenoid

If you don't replace, it the service engine light will stay on. You'll get used to the light (or you'll cover it up). Then when something else goes wrong, you wont know.

Posted on Sep 21, 2009

  • 540 Answers

SOURCE: 2005 tahoe no air blowing

as long as all the fuses are good.. its probably the blower resistor/module... located next to the blower motor under the pass. side of the dash..

Posted on Oct 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is purge valve solenoid located?


Mar 16, 2014 - 2 posts - ‎1 author
I have a 2003 Vue 3.0L 2wd.After fueling I have trouble starting, it cranks but I have to pump it a couple of time then it starts, Sometimes after it ... 2008 Saturn Vue Purge valve canister solenoid location ...
9 posts
Aug 24, 2013
access to vent valve solenoid - SaturnFans.com Forums
2 posts
Jan 20, 2013
Service engine soon light: P0440 - SaturnFans.com Forums
6 posts
Apr 15, 2010
Code P0446 (evap solenoid) and now I can't fill the gas ...
16 posts
Nov 17, 2007
More results from www.saturnfans.com

EVAP Solenoid Location - YouTube

? 2:17
https://www.youtube.com/watch?v=jIKaPF2Yw3I
Mar 20, 2007 - Uploaded by richpin06a
Saturn EVAP Solenoid Location. ... How To Test and Replace EVAP Canister Vent Control Valve P0446 - Duration: 6:18. by CarsNToys ...

EVAP Purge Solenoid Removal - YouTube




Dec 11, 2015 | 2003 Saturn VUE

1 Answer

How do I replace the purge valve on 2006 Yukon Denali


Replacing Vent Valve Solenoid Purge Valve Solenoid EVAP Valve 2005 GMC...

Remove the engine sight shield. Refer to Upper Intake Manifold Sight Shield Replacement . Remove the evaporative emission (EVAP) line from the canister purge solenoid, perform the following:
2.1.
Push the large size white retainer portion in.


2.2.
Push down, while pulling up slightly in order the disengage the tube.


Disconnect the EVAP canister purge solenoid electrical connector (1).
Remove the EVAP canister purge solenoid bolt (2). Remove the EVAP canister purge solenoid (3) and insulator (1).

Sep 19, 2015 | Cars & Trucks

1 Answer

Where is my vent valve solenoid on my 2006 Chevy Colbalt?


It's located under the vehicle back behind the fuel tank , Installed in the canister ! Remove the EVAP canister vent solenoid valve from the canister !
Rotate the EVAP canister vent solenoid valve counterclockwise in order to release it from the locked position.
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle . Disconnect the evaporative emission (EVAP) canister harness electrical connector (2) from the EVAP vent solenoid valve. Clean away any debris that may be present around the EVAP canister vent solenoid valve.
Remove the EVAP canister bolt. Lower the EVAP canister.

Feb 25, 2015 | Chevrolet Chevy Cars & Trucks

1 Answer

Codes 446 and 452


P0446 has nothing to do with the canistor !
DTC P0446 Evaporative Emission (EVAP) Vent System Performance
This DTC tests the evaporative emission (EVAP) system for a restricted or blocked EVAP vent path. The control module commands the EVAP canister purge solenoid valve Open and the EVAP canister vent solenoid valve Closed. This allows vacuum to be applied to the EVAP system. Once a calibrated vacuum level has been reached, the control module commands the EVAP canister purge solenoid valve Closed and the EVAP canister vent solenoid valve Open. The control module monitors the fuel tank pressure (FTP) sensor for a decrease in vacuum. If the vacuum does not decrease to near 0 inches H2O in a calibrated time, this DTC sets.
DTC P0452 Fuel Tank Pressure (FTP) Sensor Circuit Low Voltage


How to troubleshoot an EVAP Pressure Sensor problem P0452 GM

EVAP Vent Solenoid Code P0446 The solenoid is stuck open !

Apr 23, 2017 | 2005 Chevrolet Silverado 1500HD

1 Answer

How do I resolve diagnostic code P0455 on my 2005 Chevrolet Tahoe?


Here is the definition and possible causes.

Possible causes - Missing or loose fuel cap
- Incorrect fuel filler cap used
- Fuel filler cap remains open or fails to close
- Foreign matter caught in fuel filler cap
- EVAP canister or fuel tank leaks
- EVAP system hose leaking
- Fuel tank leaking
P0455 CHEVROLET Description This diagnosis detects leaks in the Evaporative Emission System (EVAP) purge line using engine intake manifold vacuum. If pressure does not increase, the Engine Control Module (ECM) will check for leaks in the line between the fuel tank and EVAP canister purge volume control solenoid valve under the following vacuum test condition.


The vacuum cut valve bypass valve is opened to clear the line between the fuel tank and the EVAP canister purge volume control solenoid valve. The EVAP canister vent control valve will then be closed to shut the EVAP purge line off. The EVAP canister purge volume control solenoid valve is opened to depressurize the EVAP purge line using intake manifold vacuum. After this depressurization is implemented, the EVAP canister purge volume control solenoid valve will be closed.
Read more: http://engine-codes.com/p0455_chevrolet.html#ixzz24fVfq0Bx

Aug 26, 2012 | 2005 Chevrolet Tahoe

1 Answer

Po449 0n 2006 chevy cobalt


P0449 control vent valve/solenoid circuit malfunction, This code necessarilly deal with replacing the vent solenoid it about the circuit,the evap vent solenoid circuit may have rub through on the frame (located on the back of the fuel tank),it can also be the connector,the vent solenoid itself,or the connector

Mar 24, 2012 | 2005 Chevrolet Silverado

1 Answer

My 2005 Tahoe has engine light codes P0449 & P0455. What should I replace first?


The PCM has determined that a malfunction exists in the electrical circuit for the vent valve/solenoid in the evaporative emission control system.


Probable Causes
1- Purge or vent solenoids defective
2- Check connevtor and wiring
3- Fuel saturated vapor canister
4- Failed EVAP vent solenoid

Aug 24, 2010 | 2005 Chevrolet Tahoe

1 Answer

Hi my 2005 Chevrolet Tahoe seems to have a blocked fuel vent .When I try to fill it I can hear a whistling and the fuel keeps backing up in the filler neck . Do yoy have any drawings for the routing or...



There may be a problem with your EVAP system.Dirt/dust can get into the system causing a poor fill condition.Replacement of EVAP canister and or vent solenoid may be required.
The canister and vent solenoid are located near the gas tank on the passenger side under the vehicle.


• Fuel fill limiter vent valve stuck closed • Evaporative emission (EVAP) canister restricted • EVAP vent valve stuck closed • Hose between canister and canister vent solenoid twisted or kinked if applicable • High fuel temperature • Fuel filler hose is kinked

Nov 01, 2009 | 2005 Chevrolet Tahoe

2 Answers

Service engine light keeps coming on. OBDII P0446


Hi

This engine code is related to a malfunction in the electrical circuit for the vent valve/solenoid in the evaporative emission control system.

Probable causes are;

1- Purge or vent solenoids defective.
2- Defective wiring or bad connections in the vent valve/solenoid circuit.
3- Fuel saturated vapor canister.
4- Failed EVAP vent solenoid.

These engine codes are useful indicators to where the fault lies but usually require further troubleshooting to fully determine the underlying cause.

However I have listed the probable causes so to give you a starting point for your investigations.

Hope this helps. Please remember to rate my answer. Thanks.

Jul 17, 2009 | 2000 Chevrolet Tahoe

Not finding what you are looking for?
2006 Chevrolet Tahoe Logo

Related Topics:

287 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...