Question about Mitsubishi Cars & Trucks
Ok when running on the automatic but when you shift to manual it does the same as automatic
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Have you Had the transmission fluid checked? It sounds as if the transmission is slipping in these gears which would point to a fault within the bands. To have a problem like this repaired could cost as little as $200 or as much as $1700 depending on how much needs to be done. Was the replacement a second hand transmission? If yes then did you have a warranty period with it? Let me know and I will get back to you as i am about to seek out a manual for this.
Posted on Jun 10, 2008
yes it sounds like a solenoid,,but if this goes out it wont shift it all, i could be wrong,, try to explain.. theirs a cast alumn plate about 1 thick it bolts to the bottom of your transm,,,,for every gear their is a clyder with a shaft..in it operrated pressure,, now if you have a code on computer the engin light comes on. id say it is a solenoid... you can call the main company ask for repair..tell them and they will give u an opion..
Posted on Oct 12, 2008
the correct transmission fluid is ATF+4, any other trans fluid will spoil the transmission.
i use platinum spark plugs in my engine, works great.
Posted on May 08, 2009
Tips for a great answer:
Jan 27, 2018 | Mitsubishi Cars & Trucks
The engine and automatic transmission in this vehicles drive train are fully electronically controlled by a computer called the PCM (Power Train Control Module). Whenever a problem like this occurs the computer stores a record of the problem (there are of course some exceptions to this, like the fuel pump, engine coolant temperature sensor and MAF sensor for instance) in the form of a fault code in its memory, to read these fault codes you must have the systems memory scanned with a special tool. Once the fault code(s) are read you then must perform the appropriate diagnostic testing to find and resolve the problem(s) DO NOT REPLACE ANY PARTS UNTIL A TRAINED TECHNICAIN HAS DIAGNOSED THE PROBLEM TO AVOID SPENDING YOUR HARD EARNED MONEY ON PARTS THAT MAY NOT CORRECT THE PROBLEM
Jul 26, 2012 | 1995 Mitsubishi Lancer
Automatic transmission shift lever issues?-------
AUTOMATIC TRANSMISSION FLUID LEVEL? --
AUTOMATIC TRANSMISSION FLUID AND
Transmission fault light on car dash?
Transmission shifting problem?
Transmission Slips out of 2nd gear?
OD light flashing and transmission fluid leaking?
Why Transmission fluid leaks near radiator?
Transmission fluid leaking?
****** wont go in reverse?
Automatic transmission will not go into reverse?
Transmission is making buzzing noise?
Feb 08, 2012 | 2002 Mitsubishi Lancer
Sep 22, 2010 | 2008 Mitsubishi Lancer GTS CVT Sedan
Jul 31, 2010 | 2002 Mitsubishi Lancer
Feb 10, 2010 | 2002 Mitsubishi Lancer
Mar 29, 2009 | 1999 Volkswagen Passat
Jan 05, 2009 | 1999 Audi A4
Jun 10, 2008 | 2002 Mitsubishi Lancer
Jun 22, 2018 | 2001 Mitsubishi Montero
34 people viewed this question
Usually answered in minutes!