Question about Cars & Trucks

1 Answer

Car alarm goes off while driving then car wont start

Car alarm started going off while i was driving. I don't have a keyfob just the valet key. I had to turn car off, get out and shut alarm off with the key in the drivers side door. when I get back in the car it wont start right away. I can get it started after a min. or two, but then the alarm will set when i close the door and start the car! Now the past few days i cant even get the car to start and my windows stopped working all together. The car isn't worth much and I can't keep pouring money into it. (I just paid 750$ to fix my power steering) I really want to just yank out the alarm please help Thanks

Posted by on

  • Dennis Pinto Jan 07, 2013

    Sorry I thought i wrote the make and model in the headline. It is a 1999 audi A4 1.8t

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 373 Answers

What make and model?

Posted on Jan 07, 2013

  • Dennis Pinto Jan 07, 2013

    1999 audi A41.8t

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

ginko
  • 19396 Answers

SOURCE: car alarm preventing car from starting

Try removing the alarm system relay, some car alarm has also a fuse on the alarm that you can remove.
Many car alarms unlock by inserting and turning car key while you connect the battery.

Posted on Aug 19, 2008

  • 1 Answer

SOURCE: Alarm haywire, can't override anti-theft system or turn on car

The Alarm on my Mercedes ML320 sounded every night, then it started doing it more often, Showed it to the dealer he says it's the 'Tow Sensor', that needs to be repaced. $700, down the drain. I have already started hating this car, it eats $500-600, every 6 months...

Posted on Jan 27, 2009

  • 16 Answers

SOURCE: After alarm goes off, all electrical works except car won't start

hi there
from what it sounds to me is that the alarm is still in anit theft mode
i had this happen to my vehicle

one thing you can try is lock all the doors try and unlock from the passenger side make sure that all the lock come up to the top where they should be
then try it

if that does not work then lift up the rear of the car like it was being towed and it should reset the alarm
short of that you will have to have alarm shop come to you
don

Posted on Mar 09, 2009

  • 163 Answers

SOURCE: alarm problem on 97 acura tl - now car wont start

try turning the key on then taking the +side off then turn key off and reconect+

Posted on Jun 04, 2009

  • 4793 Answers

SOURCE: car alarm went off while unlocking the door, now

you need to reset alarm/immobiliser.lock car with remote, hold button down for 30 secs,then press/hold down unlock button,should reset.another way is with key in ignition/turned on, press alarm button down and hold for 30 secs.this resets immobiliser.toyota
systems vary..depending on market.

Posted on Mar 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I turn off valet on from the keyfob


never heard of that I thought a valet key only starts car and wont let you in glove box

Feb 21, 2015 | 2001 GMC Yukon XL

1 Answer

Vats system


Instructions
    • 1
      Insert your key into the ignition. Turn the key forward until it can go no further, without starting the vehicle.

    • 2
      Press and hold the "Valet/Override" button located under the dash. Hold the button until the blinking LED light on your dash is solid. Switch your "Valet" button to "Off" if you have a button labeled "On/Off." Your alarm should now be reset. If you wish to enable the alarm, repeat these steps to turn the alarm back on.

    • 3
      Remove wires from your battery if you wish to temporarily turn off your alarm. Disconnect the wire connected to the main power source to permanently disarm your alarm. Trace all wires connected to your battery and disconnect them. If you have no familiarity with your vehicle's wiring, you should take your vehicle to a neighborhood installer to disconnect the wires for you.


God bless you

May 31, 2013 | Pontiac Firebird Cars & Trucks

1 Answer

Alarm won't turn off


the valet key doesnt have a transponder chip in it, so it will allow physical turning of keyways and operations, but will not disable the alarm and often wont disable the immobilizer.

sorry to say i think you will need to get an autolocksmith , or main dealer to get you a functioning key with transponder chip mapped to your cars rfid system that will allow alarm to be enabled /disabled

Mar 23, 2017 | 2000 Volkswagen Jetta TDI

1 Answer

Charged battery on 1997 Toyota Camry now immobilizer will not lock doors and car will not start


Here is the reset procedure:
1. Have the Valet Button in the OUT position. ( It is located on the dash panel left of the steering column)
2. Connect the battery - the alarm will sound.
3. Put the key in the ignition and turn to the ON position,
4. Push the Valet Button to the IN position.
The alarm will be reset, and the Valet Button will glow red.

Move the Valet Button to the OUT position again.
Repeat steps 3 & 4 and the Valet Button will become unlighted.
The car will start and everything will be fine.

Apr 20, 2012 | Toyota Camry Cars & Trucks

2 Answers

Just locked my doors on a 2010 jeep liberty and went to get back in and key fob is not functioning. can i get in without setting off the alarm or what should i do?


Open the door and immediately place the key in the ignition, that will shut off the alarm. The batteries in the Keyfob are probably dead and need to be replaced. You will see that the keyfob can be opened, though do it carefully, and you can replace the batteries. This will fix the remote. You may also have a valet button in the car which temporarily disables the alarm and will keep the alarm from sounding if the door is opened.

In case of a problem or clarification or my solution was insufficient, don't hesitate to post me a reply.

If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

Jun 11, 2011 | 2010 Jeep Liberty

1 Answer

I bought a Chevy Trailblazer, used, had keyless remote access Viper Alarm after manufacturer. Had trouble with transmission and alarm....took to Chevy dealer they replaced transmission. Now the remote...


You need to find the black push button called the valet button. That is the overide. Get in the car turn the key to IGN as the alarm is going off and then you have either 5 or 10 seconds to push that button once and then 2-5 seconds later the alarm is shut off. To put the car into valet mode which means no alarm at all you put the key to IGN push that button once then pull key out at which point the blue light should turn solid blue.

Or option two is you open a door and hit the lock, then unlock, then lock button again on the remote and the blue led will be solid which means no crazy alarm.

Mar 08, 2010 | 2004 Chevrolet TrailBlazer

3 Answers

2004 xtype jaguar key fob suddenly stopped working car locked and alarmed if i use key in the door will the alarm go off if so how do i stop it


Your key fob needs reprogramming, and yes the alarm will go off when you open the door, but you have enough time to put the key in the ignition which will prevent the alarm sounding. Car is usable until you get the fob sorted by locking and unlocking using the key.

Jun 07, 2009 | 2003 Jaguar X-Type

1 Answer

Locking mechanism is broken on driver's door.


If the valet key is not programmed to the Immobilzer system, it should start the car, but it will shut off. This is only if the car has an Immobilizer system. If your locksmith unlocked the car without the door key, then use the key to unlock and disarm the alarm in the door. If you triggered the alarm, the starter will be disabled till a unlock signal from a remote or the door is actually unlocked with a key. If that cannot be done, your only solution right now is to tow it to the dealership and have them make a master key and check the door locks for proper lock/unlock commands so the alarm will arm and disarm correctly.

Apr 25, 2009 | 1998 Audi A6

2 Answers

Alarm wont let me start the car


you need the remote control of the alarm to turn the alarm off.

you may need to change the battery of the remote in case it would no longer control the alarm or if you have a valet switch to turn off the alarm, then use it.

the immobilizer is working that is why you can not start the car.

tnx 4 using fixya,

drcool

Sep 13, 2008 | 1994 Nissan Maxima

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

131 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...