Question about 1999 GMC Sierra
Left rear turn signal not working, but other lights work
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: 1998 gmc sierra brake lights
did u check that they not burn?if not you should Check the wires going into the steering column if you don't have separate turn signal lights and brake lights because if they use the same bulb then the turn signal may be bad. If I remember correctly that particular car doesn't work this way, but I include it just in case.
Posted on Jun 29, 2008
SOURCE: gmc sierra turn flasher location
The flasher on this vehicle looks nothing like the flasher's of yesteryear. It will be located behind the drivers side knee bolster(under the steering wheel). It will be a small black box that is about 3 inches wide, 2 inches deep, and 1 inch thick. It may be somewhat difficult to locate because on some of the GM trucks they actually hide it behind the guage cluster bezel but to the left of the guages. Let me know if I can help you any further.
I’m happy to assist further over the phone at https://www.6ya.com/expert/jonathan_3a3c556b4b17d1d2
Posted on Aug 21, 2008
SOURCE: 2000 GMC Sierra left rear door
You may have 2 issues going on at the same time.
1. The child lock safety latch is up, preventing you from opening the door from the inside.
2. The inside clip to the rod that opens the door from the out side could of come off from closing the door to hard. Or the lock itself is getting stuck.
Roll the window all the way down, and look through the window crack with a flash light and see if any of the rods are just hanging and not connected.
If there are you can try using a slim jim with the cut out part facing up and try to catch the latch and pull up this could open the door.
Or you can try to take off the door panel from the inside, however this is very difficult and should be done by a professional becuse you don't want to break any thing or cause more dammage.
Once the door panel is off you can then pull the inside door release rod and open the door.
One more thing you can try: Pull the inside handle and the out side handle at the same time while having some on pull or push on the door, it just might be stuck and need a little force to open!
Posted on Sep 23, 2008
it seems you have a short in either one of the lights or interlock. all are connected to the same fuse. trace the wiring from the fuse box back to the component. Using a test light test in between the wires. check for any obvious breaks in the wiring.
Posted on Dec 06, 2008
Tips for a great answer:
Feb 03, 2018 | GMC Cars & Trucks
Apr 19, 2015 | 2007 GMC Sierra 1500
Dec 09, 2012 | 1999 GMC Sierra
Sep 26, 2010 | 2003 GMC Sierra 1500
Feb 05, 2010 | 1997 GMC Sierra
May 14, 2009 | 2002 GMC Sierra 1500
Mar 07, 2009 | 2003 GMC Sierra 1500
Feb 28, 2009 | 2003 GMC Sierra 1500
119 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: