Question about 2005 GMC Safari Passenger

1 Answer

Reader code is ransmission module slipping

Reader code is P0894

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 429 Answers

Means you are not getting lock up in high gear, the transmission is on the way out.

Posted on Jan 07, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi guys, how can I solve this in a mazda demio, the code is p0894 saying transmission component sliping


If the code says component is slipping then you have a worn clutch pack or low trans oil pressure

Dec 12, 2015 | Mazda Cars & Trucks

4 Answers

Code p0894 2004 trailblazer


Found that code very easily on Google. Is is a transmission code in relation to the TCC (torque converter clutch). Could be a lack of maintenance, burnt fluid or debris in the fluid. Could also be a bad TCC solenoid or another internal trans issue. You will more than likely need to visit a qualified transmission repair facility unless you are good with trans internals.

Sep 15, 2014 | 2004 Chevrolet TrailBlazer

1 Answer

Engine code 894


DTC P0894 Transmission Component Slipping
DTC P0894Circuit Description with 4L80-E / 4L85-E Automatic Transmission The powertrain control module monitors the engine speed and the transmission output shaft speed. The PCM calculates turbine shaft speed and torque converter clutch (TCC) slip speed by using inputs from the automatic transmission input shaft speed sensor, automatic transmission output shaft speed sensor, and other transmission components. The forward clutch housing is used as the AT ISS rotor. Whenever the TCC is engaged, engine speed and turbine speed will closely match, indicating low TCC slip speed. In D3, with the TCC engaged, calculated transmission component slip can only occur in the torque converter. In D4 OVERDRIVE, with the TCC engaged, transmission component slip can occur in the TCC or the fourth clutch assembly. If the PCM detects an excessive TCC slip speed in D4 OVERDRIVE, when the TCC should be engaged, then DTC P0894 sets. DTC P0894 is a type C DTC. For California emissions vehicles, DTC P0894 is a type B DTC.DTC Descriptor This diagnostic procedure supports the following DTC: DTC No MAF sensor DTC P0101, P0102 or P0103. No MAP sensor DTC P0106, P0107 or P0108. No TP sensor DTC P0120 or P0220. No VSS DTC P0502 or P0503. No ISS DTC P0716 or P0717. No TCC Stuck Off DTC P0741. No TCC Stuck On DTC P0742. No 1-2 SS valve DTC P0751, P0752 or P0753. No 2-3 SS valve DTC P0756, P0757 or P0758. No TFP manual valve position switch DTC P1810. No TCC PWM solenoid valve DTC P2761. The throttle angle is 10-100 percent. Engine speed is 1,250-5,000 RPM. The TFT is Vehicle speed is TFP manual valve position switch indicates D4. The TCC is commanded ON for 0.04 second or greater. TCC is locked ON for greater than 0.1 second. Commanded The PCM detects slip in the torque converter clutch and/or the fourth gear clutch pack with the TCC in an apply or locked mode. DTC P0894 sets during the second consecutive trip when one of the following conditions occur: The TCC slip speed is 100-550 for 10 seconds for three occurrences.The TCC slip speed is 100-550 for 10 seconds, the PCM commands maximum line pressure. The TCC slip speed is 100-550 for 12.5 seconds, the PCM commands the TCC Off for 2 seconds. The TCC slip speed is 100-550 for 15 sec For California emission equipped vehicles, the PCM illuminates the malfunction indicator lamp during the second consecutive trip in which the Conditions for Setting the DTC are met. For Federal emission equipped vehicles, the MIL is not illuminated. The PCM commands maximum line pressure. The PCM inhibits the TCC engagement. The PCM freezes transmission adaptive functions. The PCM records the operating conditions when the Conditions for Setting the DTC are met. The PCM stores this information as Freeze Frame, California only, and Failure Records, California and Federal. The PCM stores the DTC P0894 in PCM history during the second consecutive trip, California, or the first trip, Federal, in which the Conditions for Setting the DTC are met. For California emissions, the PCM turns OFF the MIL during the third consecutive trip in which the diagnostic test runs and passes. A scan tool can clear the MIL/DTC. For California emissions, the PCM clears the DTC from PCM history if the vehicle completes 40 warm-up cycles without an emission related diagnostic fault occurring. For Federal emissions, the PCM clears the DTC from PCM history if the vehicle completes 40 warm-up cycles without a non-emission related diagnostic fault occurring. The PCM cancels the DTC default actions when the fault no longer exists and the ignition switch is OFF long enough in order to power down the PCM. A TFP manual valve position switch malfunction can set DTC P0894. A mechanical failure of the shift solenoids or TCC PWM solenoid valve can set DTC P0894. Internal transmission failures can result in a DTC P0894. Sticking or contaminated shift valves may cause intermittent slipping in D4. DTC P0894 defaults to an elevated line pressure condition which may result in partial TCC apply. This may produce an idle surge that could stall the engine. The numbers below refer to the step numbers on the diagnostic table. 3. This step tests the indicated range signal to the actual selected range. A faulty TFP manual valve position switch can set a DTC P0894. 4. This step tests for excessive TCC slip speed while in a commanded TCC lock-up state and in fourth gear; and confirms that the fault is present. 5. This step tests for excessive TCC slip speed while in a commanded TCC lock-up state and in third gear. 6. This step tests for a sticking TCC shift valve. 7. This step tests for proper transmission line pressure.

Apr 18, 2014 | 2005 GMC Sierra 2500HD 4WD

2 Answers

Giving code po 894transmission


code P0894 is .... transmission component slipping
pcm look for engine rpm when transmission shift and time
if time is too long to drop it raise oil pressure with the force motor to 1 or 2 psi and retest when force motor is at max, then it code P0894
two things component realy slip or force motor is not able to raise pressure
have oil pressure (transmission) check with scan tool raise pressure of force motor to see if able to

Oct 15, 2013 | 2005 GMC Sierra

1 Answer

2004 chevy express van codes p0894


P0894 Transmission Slipping
P1258 Engine got Hot
P1516 Throttle Actuator Control (TAC)

Chevrolet Tahoe vehicles may experience a performance issue where they will not go over 15MPH. The vehicle may appear to be in "limp-in" mode, giving just enough power to get you to a shop. over-hood-250x300.gifThe codes indicate a problem with the throttle position sensor circuits and throttle actuator performance. Do NOT start replacing parts. Shops report a pattern failure in the electrical harness to these sensors. Chevrolet has issued a revised replacement harness to correct the problem. The original connector was prone to vibration and broken wires that disrupted the signal to the PCM and put the vehicle into reduced power mode.

Apr 12, 2013 | 2004 Chevrolet Express

1 Answer

P0894 05 saab 97x


This code indicates a slipping condition in the transmission. You will need to see a tranny shop for diagnosis. But first check your transmission fluid level.

Nov 12, 2012 | 2004 Chevrolet TrailBlazer

1 Answer

WHAT IS CODE P0894


P0894 is a Transmission code. It can mean your transmission is slipping. Check the fluid in your transmission.

Oct 05, 2011 | 2004 GMC Envoy

1 Answer

Code p0894


The transmission is seeing excessive slipping. 90% of the time, you will be needing a trans rebuild. I would take it to a trans shop and have them drive it to make sure

Jul 02, 2011 | 2003 GMC Yukon XL

5 Answers

Check engine light lit. P0894 or P0984 error code. Transmission slipping. What else does the code say? 2007 chevy express 3500 van.


Fixed error code P0894 - They replaced torque
convertor, solenoid, filter and did a flush.

Jul 10, 2010 | Cars & Trucks

Not finding what you are looking for?
2005 GMC Safari Passenger Logo

Related Topics:

175 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...