Question about Mazda Protege

1 Answer

Turn signals not working

Already put new bulbs turn swtich and flasher still no turn lights

Posted by on

  • madrid_luis
    madrid_luis Jan 07, 2013

    now my rear lights r working but flashing fast still no front

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Mazda Master
  • 21,873 Answers

Did you check to see if the switch is getting power ?

Posted on Jan 07, 2013

  • madrid_luis
    madrid_luis Jan 07, 2013

    all the lights come one high and lows and the actual front lights themselves r on they just wont signal how many relays and flashers r there

  •  Stephen
    Stephen Jan 07, 2013

    The headlights, parking lights, and turn signals are on three different circuits. The rear signals will flash fast if the fronts are not working. There is one flasher and one fuse for both sides. So it has to be in the wiring between the turn signal switch and the front lights. Or a ground problem.

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 25 Answers

SOURCE: 1990 buick lesabre turn signals don't work,hazard

I think that your flasher is bad I believe that the 4-ways flasher is a seperate flasher unit it should be in the fuse box and look like the 4-way flasher , to find the flasher turn on the 4-ways and you can feel it or hear it flashing and lok for the flasher for the turn signals
Mike

Posted on Jun 27, 2009

  • 7353 Answers

SOURCE: My turn signals on my jeep grand charokee don't always work

if a light goes out, the ground wire/terminal is bad.

Posted on Oct 21, 2009

  • 286 Answers

SOURCE: Turn signals and 4-way flashers do not work - 1997 Buick Century

Time to change the flasher unit, it's usually close to the drivers side of vehicle and behind a fuse box access panel and will have something like "12v 23/98W " on it. It's a largish cube shaped componant and may be water damaged !

Posted on Apr 11, 2010

  • 114 Answers

SOURCE: 2004 GMC Yukon xl......If I put left turn signal

That vehicle has all three switches attached to the same module. Spray a little wd-40 into the flasher switch. Sometimes the slide on the flasher switch gets a little sticky and won't allow the turn signal to work independently. If that isn't the case, there is a repair kit for that available on ebay. the module of course costs around three hundred to replace but could possibly be found at a boneyard for much less. Also, check ebay for that module. Hopefully the WD-40 will fix it. Good luck.

Posted on Apr 15, 2010

alicantecoli
  • 22219 Answers

SOURCE: No brake lights - good bulbs, good fuse, Flashers

renew the brake light switch it has two circuits inside it

Posted on Sep 17, 2010

Testimonial: "I can't believe how quick the response was, and it verifies what I suspected. I wanted another opinion before I purchased a new switch, Thanks!"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the flasher on a 2005 grand prix located?


can't be the flasher if the others work,most likely the socket is corroded, a test light or multi meter is the next step

May 15, 2014 | 2005 Pontiac Grand Prix

1 Answer

Grand prix front turn signals lights will not work but rears flash rapidly.


Definitely not the flasher, as long as it is flashing or blinking somewhere. Rapid flashing indicates a burned bulb, but since you already tried new bulbs in front, possibly bad bulb sockets, loose connectors, or a bad ground for the front bulbs. If you have a test light or voltmeter (multimeter), check for power at the socket when turns are on. If power then at the front, try new bulbs or trace the ground for those lights. If no power to the socket for turn signals, recheck wiring.

Apr 02, 2013 | 1995 Pontiac Grand Prix

1 Answer

Right front side turn signal does not work replaced all bulbs and checked fuses headlight flashers work when hazards are on front to back except driverside turn signal ,in dash right stays solid left


I don't believe it would be a bad ground for just one light. It could be a wire, a socket connector, or the bulb socket itself. See if the wire has power at the socket when signaling left, with key on. If there is power, probably a bad socket or connector. If no power, check for power coming from flasher-the wire going to front left, or driver's side. If you have power from the flasher, but nothing at the socket, the wire has probably broken.
Good luck.

Feb 06, 2013 | Cars & Trucks

1 Answer

All rear lights blink when i use turn signal.


Failed ground wire, no doubt caused by corrosion. Check under the vehicle at the rear or in the flasher bulb areas. Your main rear lighting common earth wire is the culprit. If you cannot find the corroded wire, then go to any rear bulb and attach a grounding wire from the bulb ground to the chassis. This will 'repair' the other missing ground feeds. The indicator is being grounded through the other bulbs circuits, rather than to vehicle chassis. You need to locate a circuit schematic and check the ground point locations. It could be anywhere unfortunately, so adding a new ground wire is the alternative grounding replacement method.

Sep 07, 2017 | Cars & Trucks

1 Answer

CHECK ENGINE LIGHT WONT LIGHT.MUST LIGHT WITH KEY ON TO PASS EMISSIONS .I ALREADY REPLACED THE BULB WHICH WAS BAD'CHECKED CIRCUIT BOARD OK. ALSO TURN SIGNALS WORK NORMAL BUT WHEN YOU PUT THE 4WAY FLASHERS...


Sounds like a crossed wiring connection somewhere, if the four-way flashers are turning on the high-beam indicator. Check all the connectors in the associated wiring harnesses for the instrument panel. Good luck!

Jan 10, 2011 | 1996 Ford Explorer

1 Answer

Turning Signals not working


if 4way flashers work & no signal,,,i would replace signal flasher,,,there are two flashers ,,,,

Apr 28, 2010 | 1989 Buick LeSabre

2 Answers

I have 4 way flashers but no turn signals....help!!!


there is a flasher for both 4 way & regular turn signals ( check to make sure the bulbs are good
the backs are easy >>> Just step on the brake, If the lights light up the bulbs are good you my have to remove the bulbs one at a time in the front check your ground wires to the lights if everything is good replace the flasher unit if that fails replace the turn signal switch

Feb 26, 2010 | 1990 Buick Century

3 Answers

97 olds 88, left turn signal not blinking.


possibly one side of your signal flasher is out turn on emergency flashers to locate one flasher then you can locate the other

Sep 12, 2009 | 1997 Oldsmobile 88

1 Answer

Turn signals not working. How do I know if it is


first check the fuse,then the flasher, the hazard flasher is a seperate flasher, then check the swtich

Jul 15, 2009 | 1994 Lincoln Town Car

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...