Question about Pontiac Grand Am

Open Question

Pontiac grand am P0133 censor 1 bank 1 codes - Grand Am Pontiac Cars & Trucks

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 71 Answers

SOURCE: Problem code P0133 ("O2 Circuit slow response")

yes i would recommend replacing the o2 sensor, 9 times out of 10 it will correct the problem and they usually aren't too expensive for the saturn's

Posted on Nov 27, 2008

Ad
emissionwiz
  • 76164 Answers

SOURCE: Service Engine soon light Code P0133

In most cases this means the O2 sensor is defective.

Posted on Dec 11, 2008

emissionwiz
  • 76164 Answers

SOURCE: I get a DTC P0133 code on my 1998 Ford Explorer V8

it may be a defective O2 sensor here is th difinition:
P0133 - Heated Oxygen Sensor (HO2S) Slow Response Bank 1 Sensor 1 , this is the sensor on the side of the engine that #1 cylinder is on, it is the sensor before the cat.

Posted on Jan 14, 2009

juggernautxt
  • 145 Answers

SOURCE: Code: P0133 - O2 Sensor Circuit Slow Response Bank 1 Sensor 1

is this a 4 or 6 cylinder?
if a 4 cylinder it will only have 2 o2 sensors
V6 will have 4 o2 senors which the sensor will be the right side of the engine first sensor.
1st sensor on exhaust, I recommend if you change one change all, as this will make the computer when it rechecks the system you have all clean/fast responding sensors.

if you have a slow response it means the sensor is dirty and not reading well, which is usually caused by minor misfires that the engine computer dismisses, so a tune up would be recommended too.

Posted on May 06, 2009

  • 7353 Answers

SOURCE: have p0130 and p0133 codes 98 toyota tacoma

I would check the O2 sensor, and if it checks bad, replace it, and clear the trouble codes. If the light comes back on, you may need to check further. .

Posted on Oct 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My 2004 Honda CRV showing code P0133 and P0171


  • P0133 O2 Sensor Circuit Slow Response (Bank 1 Sensor 1)
  • P0171 System Too Lean (Bank 1)
Hi Michael, After fixing errors you need to reset your computer by disconnecting the battery for a minute or two, Also you'll need your radio code to reset your radio, I hope this helped...........CHEERS..

May 07, 2016 | Honda Cars & Trucks

2 Answers

I have a jeep grand cherokee 2005 with p0133 and p0430 code


Check the codes again! The P0133 is O2 sensor bank 1 and the P0430 is O2 sensor bank 2.

The next step requires the connection to the OBDII port with a graphic scanner. These problems are relatively easy to diagnose with the proper tool. A graphic representation of the Bank 1 O2 sensor will tell in just a few minutes if the upstream O2 is working properly.

The attached link is worth the time to review the operation and diagnosis of your reported problem. With the knowledge of how these sensors and cat work graphically will provide you with the ability to chose the right shop to diagnose whats going on.

The link is a 30 minute tape and will provide the insight. The P0133 is the easiest to diagnose and it is the bank 1 upstream O2 sensor. The wave shape always looks like the attached photo below. The interval between peaks is about 1 second.
16062534-ih3lwmrmq5etwyzj5xohplbh-1-0.jpg

The problem with both banks having problems requires a review of the engine operation. Common to both problems is the engine fuel system.


Diagnosing catalyst efficiency code P0420 or P0430

Things to check are as follows:
Check and fix any exhaust leaks
Check for wiring problems (shorted, frayed wires)
Check the frequency and amplitude of the oxygen sensor (advanced)
Check for a deteriorating / contaminated oxygen sensor, replace if necessary
Check for inlet air leaks
Check the MAF sensor for proper operation

Jan 22, 2013 | Jeep Grand Cherokee Cars & Trucks

1 Answer

Trouble code P0133 & P1134


P0133 HO2S Slow Response Bank 1 Sensor 1 and P1134 HO2S Transition Time Ratio Bank1 Sensor1
Both of these codes are common for the Oxygen Sensor. I hope this helps.

Jun 24, 2010 | 2004 Pontiac Grand Prix

1 Answer

What do codes P0128, P0133, P0496


Definition of Diagnostic Trouble Code P0128 Category Powertrain Definition Coolant Thermostat (Coolant Temperature Below Thermostat Regulating Temperature)
Definition of Diagnostic Trouble Code P0133 Category Powertrain Definition O2 Sensor Circuit Slow Response Bank 1 Sensor 1

Definition of Diagnostic Trouble Code P0496 Category Powertrain Definition Evaporative Emission System High Purge Flow

Mar 10, 2010 | 2006 Suzuki Forenza

1 Answer

OBD II code P0133 (O2 bank 1 sensor 1) which


It is the front sensor, if your car is the type that has 2 front sensors it will be the one closest to the timing chain / belt (left hand side of engine)

Nov 27, 2009 | 2005 Suzuki Forenza

2 Answers

Have p0130 and p0133 codes 98 toyota tacoma


check the mass air flow sensor there maybe dirt on the filiment inside the sensor causing false readings. cleaning or replacing it may make the codes go away.

Oct 28, 2009 | 1998 Toyota Tacoma

1 Answer

Obd code p0133 and p01131


P1131 bank 1 indicates the fuel/air ratio is correcting rich for an overly lean condition.
Diagnostic Trouble Codes (DTCs) P0133 and P0153 indicates the response rate of the upstream HO2S(s) is below some calibrated window. The test measures the HO2S amplitude and output frequency. This is accomplished by superimposing a 1.5 to 2.5 Hz square wave over Lambse. The HO2S switching is monitored during this time to see if the calibration limit is met. P0133 is also bank 1.
Although these codes could be caused by several things such as vacuum leaks,fuel contamination,exhaust leaks,miss-fires,etc. Since it is localized on only bank one I would replace that front(upper in the exhaust to back cylinder head) 02 sensor and see if that did not correct my concern.

Mar 12, 2009 | 1997 Ford Taurus

2 Answers

I get a DTC P0133 code on my 1998 Ford Explorer V8


it may be a defective O2 sensor here is th difinition:
P0133 - Heated Oxygen Sensor (HO2S) Slow Response Bank 1 Sensor 1 , this is the sensor on the side of the engine that #1 cylinder is on, it is the sensor before the cat.

Jan 11, 2009 | 1998 Ford Explorer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...