Question about 1995 Dodge Ram 2500
Do you have enough fuel pressure at the rail ?
Can you make it catch if you spray starter fluid in the throttle body ?
Are the injectors getting voltage and a ground pulse from the computer ? ?
Posted on Jan 07, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Tried starting my 1999 dodge
If your positive and negative terminals are clean, both ends... not
just battery, you should hear your starter relay click each time you
turn the ignition key to 'start'. If no click, check connections to
relay, If still no click, relay may be the problem. Assuming your
battery or batteries are charged and you only here the click of the
relay and no starter action, good chance the starter solenoid is in
poor condidtion, or history. An indication of this problem is the
starter would work intermittently and finally quit working.
Its an easy cheap fix. First disconnect you positive cable on the battery so you don't fry yourself or anything expensive. Remove the starter. Undo usually four bolts that hold the starter case together and pull it apart. Its always a good idea to pay attention how it came apart so you put it back together the same way.
The starter solenoid is just an electrical contact switch that conducts high amperage to the starter motor during engine start. The contacts in this switch burn out over time. When you pull the starter housing apart, you will see that the solinoid contact switch is installed within the hump on the side of the starter housing. You will quickly see if the solinoid contacts are burnt or damaged. Most auto parts stores have a whole collection of contacts. I paid 3.85 Canadian for a set that didn't quite match the set in my 95 dodge cummins. 20 minutes of filing saved me the $600.00 my buddies were paying . "Rebuilt' my starter about 5 years ago... and starts every time. Hope this helps someone out.
Posted on Dec 15, 2008
Hello mhak330: My name is Roger and I can give you the answer to your question. Locate the ECM on the drivers side of the engine.look for the bottom bolt holding the ECM. To the right of the bolt you should see the oil pressure sender unit. Should you need further help please just ask. Please rate the quality of your answer. This way we know you received helpful information. Thank You for using Fix Ya. Roger
Posted on Jul 07, 2009
Get a Haynes book for your model truck for less than $20.00. It has pictures and written directions. It is easy to do.
It is foolish to work on your truck without a service manual. You can order one on the internet or go to a Strauss or Pep Boys store,
Posted on Oct 18, 2009
Tips for a great answer:
Jan 21, 2015 | Dodge Cars & Trucks
Jan 25, 2014 | 2001 Dodge Stratus
Jun 12, 2012 | 1998 Dodge Ram 2500 2WD
Jan 05, 2011 | 2001 Dodge Ram 2500 Truck
Mar 22, 2010 | 2001 Dodge Ram 2500 Truck
Jan 14, 2009 | 1994 Dodge Ram 2500
Dec 27, 2008 | 2001 Dodge Ram 2500 Truck
Dec 07, 2008 | 2001 Dodge Ram 1500 Truck 2WD
Sep 09, 2015 | 1995 Dodge Ram 2500
117 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: