Question about Dodge Pickup

Open Question

How to replace solenoid part number 52119435AF 1029

2004 Dodge S15 pickup how do you change out the solenoid on outside of transmission. Part number 52119435AF 1029D Solenoid-Transmission. This part is for the computer code of P0765, shift solenoid "D".

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 3 Answers

SOURCE: 2000 Dodge Sratus 4 speed auto transmission

Dave, The P0700 code is a generic fault code indicating the the TCM (transmission control module) has recognized a problem and the P0755 is the indicated problem. I'd recommend you check your transmission external electrical connector for water intrusion and corrosion at the terminals by disconnecting the connector. If nothing appears wrong, I'd then recommend you drop the lower transmission pan and take a look at the residue deposit that is laying on the bottom of the pan. You should only see a relativily minor amount of grayish, black clutch material residing there. Pay particular attention for a gross amount of this or any large particular material, including any metal, either filings or chunks, or any brass or aluminum. If this checks out to be fairly clean, then I'd recommend you replace that "B" solenoid (2-3 shift solenoid) and have the trans. pan and filter replaced.; I'd also highly recommend you have the trans flushed for anyother particular matter that may reside internally inside the transmission. You'll have to have the codes cleared and the transmission relearned for shift feel, at that point.

Posted on Jan 08, 2009

  • 412 Answers

SOURCE: trouble with the transmission solenoid

USUALLY A SHIFT SOLENOID DTC IS REPAIRED BY REPLACING THE TRANS SOLENOID PACK ASSEMBLY..LOCATED ON OUTSIDE OF TRANSMISSION..YOU MUST BE CAREFUL WHEN CHANGING PACK..CLEAN ALL DIRT/DEBRIS FROM OUTSIDE OF PACK..YOU DON'T WANT ANY DIRT TO ENTER TRANSMISSION..SOLENOID IS A SMALL BOX LOCATED ON SIDE OF TRANS FACING FRONT OF VEHICLE..YOU MUST REMOVE TRANS COOLER LINE HOSES FROM FITTINGS ON TRANS..REMOVE INPUT SPEED SENSOR..UNPLUG PACK..8MM SCREW HOLDS IT..3 BOLTS HOLD PACK TO TRANS..YOU MUST CLEAN ALL GASKET RESIDUE THOROUGHLY BEFORE INSTALLING PACK..I'D RECOMMEND GETTING SOMEONE WHO HAS DONE THIS BEFORE IF YOU ARE NOT COMFORTABLE DOING THIS..I HOPE THIS HELPS

Posted on Dec 30, 2009

emissionwiz
  • 75077 Answers

SOURCE: Transmission not shifting correctly

u have a shorted trans shift solenoid B inside the transmission

Posted on Jun 25, 2009

Testimonial: "Thanks, i am still having same problem even after changing shift solenoid B??? any ideas.."

  • 1 Answer

SOURCE: Transmission Problems on 2001 Elantra

what can i do to fix the output speed sensor

Posted on Aug 05, 2010

dttech
  • 4803 Answers

SOURCE: Where is the Transmission Solenoid

The TCC solenoid is located inside the transmission. Replacing the solenoid usually does not fix the problem when it comes to a P0741 code. It is usually due to debris getting caught in the TCC regulator valve or the tubine shaft seals being worn out. This usually results in a transmission overhaul.

Posted on Dec 27, 2010

Testimonial: "You are 100% correct.I did end up getting an overhall"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do u change a transmission control solenoid on a 07 dodge pickup 5.7 liter hemi


The solenoid is inside the transmission on the valve body. It will be necessary to drain the fluid and take off the pan to get to it

Nov 05, 2016 | Dodge Cars & Trucks

1 Answer

I have a ram 15004.6 45fee trans/I'm getting a code for E SOLENOID MAIFUNTION.where is that SOLENOID located


All control solenoids are located inside the transmission bolted to the valve body.

Sep 12, 2016 | 2002 Dodge Ram Pickup 1500

1 Answer

My 2003 dodge pickup transmission starts off in drive not first and it won't shift in to over drive what could it be


have transmission checked for codes
probable shift solenoid which inside transmission
press helpful button

Dec 28, 2015 | Dodge Cars & Trucks

1 Answer

Dodge caravan dies when in gear


Vacuum leaks. ( hissing noise around the engine). Tune up (plugs and wires). clean the throttle body(inside of it). All these can cause rough idle. The dieing can be from transmission problems. Can you rev the van up and keep it running while in gear? Or does it die then too? You can replace the solenoid pack on the outside of the transmission for around $250, if you do it yourself. If you do this, DO NOT get any dirt in the holes of the transmission where the solenoid pack sets. Clean it well before you remove the old pack.

Mar 24, 2014 | 2002 Dodge Grand Caravan

1 Answer

Can I change the solenoid on my 1992 Dodge Dakota pickup, 6 cyl without removing the starter or do I have to replace the whole starter?


Most starters now a days have the solenoid integrated into the starter and are therefore irremovable. Replace the whole starter.

Dec 05, 2011 | 1992 Dodge Dakota

1 Answer

Trouble with the transmission solenoid 2000 dodge caravan. Automatic transmission. The check engine light code read Transmission shift solenoid. I need suggestions on how to fix this myself


USUALLY A SHIFT SOLENOID DTC IS REPAIRED BY REPLACING THE TRANS SOLENOID PACK ASSEMBLY..LOCATED ON OUTSIDE OF TRANSMISSION..YOU MUST BE CAREFUL WHEN CHANGING PACK..CLEAN ALL DIRT/DEBRIS FROM OUTSIDE OF PACK..YOU DON'T WANT ANY DIRT TO ENTER TRANSMISSION..SOLENOID IS A SMALL BOX LOCATED ON SIDE OF TRANS FACING FRONT OF VEHICLE..YOU MUST REMOVE TRANS COOLER LINE HOSES FROM FITTINGS ON TRANS..REMOVE INPUT SPEED SENSOR..UNPLUG PACK..8MM SCREW HOLDS IT..3 BOLTS HOLD PACK TO TRANS..YOU MUST CLEAN ALL GASKET RESIDUE THOROUGHLY BEFORE INSTALLING PACK..I'D RECOMMEND GETTING SOMEONE WHO HAS DONE THIS BEFORE IF YOU ARE NOT COMFORTABLE DOING THIS..I HOPE THIS HELPS

Dec 30, 2009 | 2000 Dodge Caravan

1 Answer

2005 dodge stratus - 4 cyl auto - while driving, car shifts into 2nd gear and will not shift higher. the transmission solenoid/pressure switch assembly and wires have been replaced but it happened again.


ANY CODES PRESENT?ENGINE LIGHT ON?YOU MAY HAVE AN INPUT OR OUTPUT SENSOR DROPPING OUT..ALSO SOME DIRT MAY HAVE ENTERED TRANSMISSION WHEN SOLENOID PACK WAS CHANGED..MAY HAVE WENT INTO SMALL FILTER SCREENS OF SOLENOID PACK WHEN ENGINE WAS STARTED,CUTTING OFF FLUID FLOW TO SOLENOIDS..HAVE SEEN THIS RECENTLY AFTER A SOLENOID PACK REPLACEMENT

Jul 18, 2009 | 2004 Dodge Stratus

1 Answer

1998 dodge avenger tranmission control solenoid


Below the link for Chrysler/Dodge auto-transmission manual
http://www.scribd.com/doc/7095618/545rfe-Transmission-Manual

Solenoid mounts outside the transmission, so you do not need to remove the transmission to install. It should be located between fuse box and air filter housing on the top of transaxle case and right next to transmission controle module.
I hope his step by step procedure will work for you. It is not hard at all to replace the solenoid. There are three 10mm bolts. You will also need to remove the input speed sensor. One thing to look out for is not bending the gasket when installing the new solenoid:
  1. Disconnect battery negative cable.
  2. Remove air cleaner assembly.
  3. Remove electrical connectors for transmission control module (please refer the manual I send you and autozone.com website).
  4. Remove the Transmission Control Module
  5. Disconnect and remove the input speed sensor
  6. Disconnect the transmission oil cooler lines. Cap off hoses and fittings to prevent foreign matter intrusion.
  7. Disconnect the solenoid/pressure switch assembly connector.
  8. Remove the three solenoid/pressure switch assembly-to-transaxle case bolts
  9. Remove solenoid/pressure switch assembly and gasket

Keep everything clean to prevent foreign materials to go inside
  1. Install solenoid/pressure switch assembly to case using a new gasket
  2. Install bolts and torque to 13 N·m (110 in. lbs.)
  3. Install 8-way connector and torque screw to 4 N·m (35 in. lbs.)
  4. Uncap and install transmission oil cooler lines.
  5. Install input speed sensor and torque to 27 N·m (20 ft. lbs.)
  6. Install Transmission Control Module
  7. Install air cleaner assembly.
  8. Connect battery negative cable.

P.s. 1. You can fine some clips on YouTube.com at least for similar cars
2. Also at Autozone.com you can find the component location for your car and repair guide
3. Also there is a link for Mitchel1 online manual useb by US mechanic 1 week subscribtion is
11.99 , 1 month 16.99
http://www.2carpros.com/kpages/auto_repair_manuals.htm
Let me know if you need more info
Good Luck and happy fixing

Jan 22, 2009 | 1998 Dodge Avenger

2 Answers

1988 Dodge Ram 4x4 pickup


dodge uses e solenoids to shift the trans.I am not sure on an 88 but this sounds like why it acts up when drained.
repair your charging system and should be fine

Aug 26, 2008 | 1988 Dodge D-Series Pickups

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

678 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...