Question about 2007 Dodge Caliber SXT Sport Hatchback

Open Question

Code p0017 on a dodge caliber

There are 7 crank shaft sensors that go on this vehicle which one correlates with code p0017

Posted by on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: I have 2008 Dodge Caliber

Sounds like your crank sensor or cam sensor is malfunctioning. Their positions are not correlating which means they are not in perfect alignment according to the computer. I don't think the parts are very expensive and probably not that hard to replace. I replaced both on my 99 Ford Explorer, and I don't recall it that difficult. Anyway, hope this helps.

Posted on Mar 17, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

P0016 and P0017 check engine pop up after i run for 10 to 15 miles?


the common causes for code P0017 are as follows:
  • A faulty cam or crank sensor
  • The cam or crank circuit is open or shorted
  • The timing belt/chain is out of time
  • The cam or crank tone ring is slipped/broken
  • A problem in the VVT system P0016 Crankshaft Position - Camshaft Position Correlation (Bank 1 Sensor A) P0017 Crankshaft Position - Camshaft Position Correlation (Bank 1 Sensor) God Bless! Hope this helps you.

Mar 08, 2016 | Cars & Trucks

1 Answer

Volvo code p0017


Ok, P0017 = Cam/Crank Position Correlation Sensor B Bank 1, so that's your Camshaft Position sensor ; which could be either faulty or set in the incorrect position.

Jul 10, 2014 | 2005 Volvo S60

1 Answer

2002 VOLVO S80 T6 CODE P0017


the word correlation means relationship between two or more items . In this case it means that when the crank shaft sensor is triggered then the camshaft sensor has to be in agreement that the position of the piston and valves is in the right position to allow spark and fuel.. there are air gaps between each sensor and the rotor that triggers them and if this is not correct or there is dirt in the air gap ( the sensors may be a bit advanced or retarded in the fitment holes) then this relationship of positions is being interfered with and so you get the fault code. If after rechecking the fitment of the sensors and using a scanner to put the engine light off ,you still have a problem ,I would suggest that you find an accredited shop the does a lot of work on your make of car to assist with the fault.

Apr 23, 2014 | 2002 Volvo S80

1 Answer

I have a 2007 jeep patriot. It stalled at stop sign started ran rough. Parked came back drove it home ran u- scan code p0017 replaced crank and cam sensors still runs rough changed plugs were bad. I was...


code p0017 refers to crank/ cam oosition sensor bank 1 sensor B -correlation ===causes --wiring--CKP sensor--CMP sensor--mechanical fault.
It also refers to control modules, cooling fan--no signal===causes -- wiring--ECM.
If it has a timing chain then the the advice that it will not be the chain is good. So I suggest checking out the cam/ crank sensors and wiring

Oct 22, 2013 | 2008 Jeep Patriot

1 Answer

What causes dtc p0017 &p0522


Code 17 is a problem with the correlation between the cam and crank sensors. The computer can't figure out where top dead center is for cylinder one.
Code 522 is the oil pressure sensor or switch is telling the computer the engine has no oil pressure.

Jul 06, 2013 | Cars & Trucks

1 Answer

P0017


The generic code is for the correlation between the crank sensor and the cam sensor on bank one sensor 2 or B.
The computer is not finding the cam in the right position based on the crank sensor and the other cam sensors.
Code 17 for Chevrolet may be different.

Jul 18, 2012 | Chevrolet Cars & Trucks

1 Answer

I have 2008 Dodge Caliber and the engine light came on with codes P0017 Crank Shaft Position Cam Shaft Position Correlation - Bank 1 Sensor B can you tell me what this means as i cannot afford to...


Sounds like your crank sensor or cam sensor is malfunctioning. Their positions are not correlating which means they are not in perfect alignment according to the computer. I don't think the parts are very expensive and probably not that hard to replace. I replaced both on my 99 Ford Explorer, and I don't recall it that difficult. Anyway, hope this helps.

Mar 17, 2011 | Dodge Caliber Cars & Trucks

1 Answer

3.6 in a 2006 pontiac g6 is throwing code p0017 is this crank sensors or what is the most common fix


P0017 - Crankshaft Position - Camshaft Position Correlation (Bank 1 Sensor B)

The crankshaft position sensor (CKP) and Camshaft position sensor (CMP) work in harmony to control the spark/fuel delivery and timing. They both consist of a reluctor, or tone, ring which passes over a magnetic sensor, which generates a voltage, indicating position.

The crankshaft sensor is part of the primary ignition system and functions as the "trigger". It detects the position of the crankshaft relays that information on to the PCM or the ignition module (depending on the vehicle) to control spark timing. The Camshaft position sensor detects the position of the camshafts and relays the information to the PCM. The PCM uses the CMP signal to identify the beginning of the injector sequence. What ties these two shafts and their sensors together is the timing belt or chain. The cam and crank should be precisely timed together. If the PCM detects that the Crank and Cam signals are out of time by a specific number of degrees, this P0017 code will set.

Symptoms of a P0017 will or may include:
* Malfunction Indicator Lamp (MIL) illumination
* The engine may run but with reduced performance
* The engine may crank but not start
* The engine may exhibit a rattle near the harmonic balancer indicating the tone ring is damaged
* The engine may start and run, but poorly

Causes may include:
* Timing chain stretched, or timing belt skipped a tooth due to wear
* Misalignment of timing belt/chain
* Tone ring on crankshaft slipped/broken
* Tone ring on camshaft slipped/broken
* Bad crank sensor
* Bad cam sensor
* Damaged wiring to crank/cam sensor
* Timing belt/chain tensioner damaged

Possible Solutions:
1. First, visually inspect the cam and crank sensors and their harnesses for damage. If you notice broken/frayed wires, repair and recheck.
2. If you have access to a scope, check the cam and crank patterns. If a pattern is missing, suspect a bad sensor or a slipping tone ring. Remove the cam gear and the crankshaft harmonic balancer and inspect the tone rings for proper alignment and make sure they're not loose or damaged or that they haven't sheared the key that aligns them. If they are properly installed, replace the sensor.
3. If the signal appears normal, then check the timing chain/belt for proper alignment. If it's misaligned, check for a damaged tensioner that may have allowed the chain/belt to slip a tooth or several teeth. Also check that the belt/chain isn't stretched. Repair and recheck.

Other crank sensor codes include P0016, P0018, P0019, P0335, P0336, P0337, P0338, P0339, P0385, P0386, P0387, P0388, and P0389.


Hope this helps (remember to rate and comment this answer).

Nov 23, 2010 | 2006 Pontiac G6

1 Answer

Engine Light on and P0017 Code displays on Computer


The cam sensor is out of correlation with the crankshaft. Check both the crankshaft sensor and the camshaft sensor on vehicle. Also check the wiring to each sensor for broken or damage wires. Hope this will help you.

May 18, 2010 | Cars & Trucks

Not finding what you are looking for?
2007 Dodge Caliber SXT Sport Hatchback Logo

Related Topics:

530 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...