Question about Mercedes-Benz Cars & Trucks

Open Question

Vito will not rev past 2500 rpm - Mercedes-Benz Cars & Trucks

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ajkill
  • 2035 Answers

SOURCE: won't rev past 2000 rpm

Check the computer on the car it may be programmed to run still on 2 K rpm you need to reprogram the computer on your car.......

Posted on May 27, 2008

j_del
  • 1586 Answers

SOURCE: 92 300zx rpm will not go over 2500 rpm pops from intake

This is a classic symptom of a bad mass airflow sensor. Nissan designed this as a protective feature on the car. If the mass air sensor goes bad, the computer limits the car to a 2400RPM rev limit to prevent damage.

The sensor is under the center nose panel between the headlights. Take that off and on the back of the airbox (which fills this space) you'll see a pipe coming out that meets at a "T" with another hose going across and down under the headlights. That pipe off the back of the airbox is the mass air sensor (it has a harness plugged in).

Posted on Mar 27, 2009

  • 496 Answers

SOURCE: my 1987 turbo toyota supra

The throttle position sensor has an idle switch in it that tells the car's computer that the throttle is positioned at idle. If the idle switch sticks in the idle position, the computer will not allow the engine to rev more than 2500 rpm. In your case, I think the switch is stuck.

First, see if you can get the trouble codes to come up. Rig a jumper wire and jump between the "T" terminal and the "E1" terminal in the car's "Diagnostics" box. It is a small black box on the driver's side of the engine compartment near the battery. Open the lid and on the inside of the lid it has a map of the terminals.

Once you hook up the jumper wire, turn the ignition switch to on but do not start the car. If there are codes, the check engine light (orange) will blink the 2 digit code. It blinks the first digit, pauses, then blinks the second digit. The code for the throttle position sensor is code "41". That is, four blinks...pause...then one blink. If this code comes up, change the throttle position sensor. (If there are no codes, the check engine light will steadily blink once per second until you turn the key to off.) Don't forget to remove the jumper wire when you are finished.

Posted on Apr 11, 2009

jmgldsmth
  • 1869 Answers

SOURCE: Chrysler 3.5 won`t rev past 2500 rpm?

remove the aircleaner intake hose and, check the intake air control flap for free movement

Posted on Apr 22, 2009

Nismo Lu
  • 12 Answers

SOURCE: my car will only rev to 2500 rpm in drive or in

bad mass air flow meter replace it also check for a ecm update at the dealership goes by vin pretty common problem

Posted on Jun 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1999 es300 and it wont rev past 2500 rpm whats the problem?


sounds like your vehicle has gone into "limp mode". get a diagnostic machine hooked up to your obd.

Apr 24, 2017 | Cars & Trucks

1 Answer

Hyundai sante fe 2007 2.2crdi wont rev past 3000 rpm


If your standing still in park it wont rev past 3000 rpm as its got a limiter on it And only revs past 3000 rpm in drive on the move.

Sep 27, 2016 | 2007 Hyundai Santa Fe

1 Answer

Car wont rev past 2500 rpm


If it's an automatic transmission the torque converter may be locked up.

Oct 19, 2014 | Cars & Trucks

1 Answer

1991 eagle talon wont rev past 2500rpm


May not be getting enough fuel to the engine

Mar 16, 2013 | 1991 Eagle Talon

1 Answer

2001 nissan frontier won't rev over 2500 rpm


Is the check engine light on ?
Have you checked the fuel pressure ?
Could also be a restriction in the exhaust.

Jul 01, 2012 | Nissan Frontier Cars & Trucks

1 Answer

Check engine light on. Will not rev up over 2500 rpm. Fluctuates between 2000 and 2500 rpm and runs rough. Upon first start, you can rev fine and it runs smooth as long as you hold the rpms over 3000. ...


Hi, there are a lot of things that could cause this behavior, so it would help us to diagnose your problem if you could get a scan of the OBD2 connector and send us the trouble code. If you live in the US you can usually get a free scan at your local parts chain.

May 19, 2011 | 2004 Dodge Durango

1 Answer

Chrysler 3.5 won`t rev past 2500 rpm?


remove the aircleaner intake hose and, check the intake air control flap for free movement

Apr 22, 2009 | 2002 Chrysler 300M

2 Answers

My car will only rev to 2500 rpm in drive or in


bad mass air flow meter replace it also check for a ecm update at the dealership goes by vin pretty common problem

Feb 28, 2009 | 2003 Nissan Maxima

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

yadayada
yadayada

Level 3 Expert

75744 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...