Question about Cars & Trucks

Open Question

BCM P04692 2007 dakota

Where is the Body control module (BMC) located on a Dodge Dakota 2007?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: body control module location

the location of the bcm is at the passenger side glove box area12900_pcm_2.jpg

Posted on Apr 23, 2009

  • 1 Answer

SOURCE: location of spark plugs in 2005 dodge dakota

To change the sparks on a 2005 4.7L Dodge Dakota you will need the following:

  • Spark plug socket
  • Ratchet
  • Torque wrench
  • Extension
  • Flat-tip screwdriver
  • Make sure the truck is cold!!!

Note you will have to remove the air intake located at the top of the engine, and will have to move some of the coolant lines out of the way.

At the top of the engine there are 4 sparks on each side. The coils are held in place with a 10mm bolt. Undo the 10mm bolt and unclip the coil. Next pull out the coil.

Insert the socket, with extension into the spark plug hole.

Remove spark plug.

Check the gap on new spark plug, it should match stock.

tighten to approximately 25ft.lbs. (check spark-plug packaging for exact torque requirements).

repeat this process with all other sparks.

be sure that no dirt gets into the spark plug holes.



Posted on May 11, 2009

t1randa
  • 27 Answers

SOURCE: location of the thermostat on a 2000 dodge dakota 3.9l v6 located

right in front on top of motor follow your top rattior hose to the motor

Posted on May 31, 2009

  • 18 Answers

SOURCE: DISABLING SERVICE RIDE CONTROL via REPROGRAMMED BCM

bottom of sterring colum under under trim panel

Posted on Jul 19, 2009

  • 333 Answers

SOURCE: where is the transfer case control module located

It is located under the driver side dash, on the steering column. See diagram below:
0d1bdaa.gif

Posted on Oct 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 Dodge Dakota 4x4 SLT Body Control Module location


I have a manual for a 2004 Dakota that is probably similar to the 2006 electrically. Dodge never called it a Body Control Module; earlier models did have the Central Timer Module (CTM) which functioned like Body Control Modules in other manufacturers vehicles.
In 2004, the CTM was replaced by the Integrated Power Module (IPM), which consists of the Front Control Module and Power Distribution Center, and is located next to the battery on the left inner fenderwell (the Front Control Module is underneath the Power Distribution Center, where you will find relays and fuses). There are several other modules which control various functions, and they communicate with each other through the Programmable Communication Interface (PCI) bus circuit, also called J1850.
The Front Control Module controls all exterior lights, except brake lights and turn signals, and the windshield wiper functions. Other modules (PCM, TCM, antilock brakes, heated seats, instrument cluster, power locks/power windows/power mirrors, etc) control other functions, but all communicate through the PCI bus.

Nov 08, 2016 | 2006 Dodge Dakota

1 Answer

Where is the body control module (bmc) located at in a Ford Windstar 2002?


pretty sure this vehicle does not have a BCM. most fords don't. there is a module built onto the back of the inside fuse block that is more or less the same thing. a real pain to get out of the vehicle.

Apr 29, 2015 | Ford Cars & Trucks

1 Answer

Where is the ignition control module located on a 1991 Dodge Dakota?


Hello
The ignition control module is part of the ECM engine computer which is located under the hood.

Nov 01, 2011 | 1991 Dodge Dakota

1 Answer

98 dakota headlights flash off and on, light switch has been replaced, what next? would overvoltage cause problem?


this is caused by the bcm(body control module) which is the fuse block inside the vehicle. chryslers have a bad problem with wiring issues.

Jan 20, 2010 | 1999 Dodge Dakota

1 Answer

Location of heater control module on Dodge Dakota 2002


The heater control module is in most newer vehicles the heater control panel in the dash. Where the fan, heat, a/c controls are...

Sep 14, 2009 | 2002 Dodge Dakota Club Cab

1 Answer

My 2001 Dodge Dakota Club Cab truck has a chime that will not turn off. Chirps randomly the entire time that the car is on. It sounds like the seat belt warning but no hazard symbols show on the dash. The...


I'm sorry, they are correct. On your truck most interior features are controlled by one module called a BCM or body control module, you may cause way more problems if you just started unhooking things... unfortunately, just like other computer related items in our lives, sometimes we just have no control.

Sorry...
R

Feb 27, 2009 | 2001 Dodge Dakota

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...