Question about 2008 Chevrolet Impala
New battery, lights work will not turn over.
I have a 08 impala also, i have the same problem it makes two clicks when trying to start , but I got mine to start by putting in (n) neutral let it roll forward while trying to start , but I believe changing the starter will help you with your problem
Posted on Jan 08, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
i used to work as a GM mechanic for years, and we had quite a few complaints like yours, GM issued a computer reprogram to resolve most issues with starting, i would contact your local dealer and have them check for open campaigns or bulletins for your car if there is one they will do it at no cost to you.
Posted on Nov 10, 2008
SOURCE: 2001 Chevy Impala won't start
If the battery has gone dead, it could cause the security system to go into full lock-up mode. If it has locked up the accessories will work after the battery is charged back up , but the power to the starter will be cut off and it wont turn over. You need to do the 30 minute learn procedure. A GM dealer will print it out for you and you can do it yourself. It's very simple if you follow the procedure exact. hope this helps and good luck.
Posted on Mar 25, 2009
Posted on Nov 01, 2009
After you replace the ignition switch turn the key to start the car and release leave the key were it stops after trying to start wait 10 minutes until security light goes out turn key to full off position then repeat the above procedure two more times for a total of three on the 3rd attempt to start car wait for light to go out then turn key to full off positoion wait 10 seconds then try to start car body control module should learn new pass code and the car should start.
Big john, J@J Automotive
Posted on Mar 02, 2010
ur vehicle is in limp mode[ a safe mode ] which will get u home trying not to cause any damage to engine --theirs a few reasons the vehicle will do this-low oil pressure-transmission problem-have vehicle scanned most auto stores such as auto zone / advanced auto [check ur local area]do this service for free the code gives u a start point towards resolving ur problem
Posted on May 11, 2010
Tips for a great answer:
Jan 23, 2016 | Cars & Trucks
Jan 16, 2016 | 2003 Chevrolet Impala
Feb 28, 2015 | Chevrolet Impala Cars & Trucks
Feb 06, 2015 | 2008 Chevrolet Impala
Aug 16, 2014 | 2003 Chevrolet Impala
Sep 06, 2012 | 2008 Chevrolet Impala
Nov 07, 2011 | 2008 Chevrolet Impala
Jun 21, 2011 | 2008 Chevrolet Impala
May 11, 2010 | 2008 Chevrolet Impala
Jan 23, 2010 | 2008 Chevrolet Impala
600 people viewed this question
Usually answered in minutes!