Question about 1993 Chevrolet G20

Open Question

1993 G20 Chevy Van I have a 2 part question first is thing electrical that would prevent a transmission from operating in drive and over drive ranges and is there any in-line fuses to the transmission and if so where are they located

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
chiquititas
  • 1010 Answers

SOURCE: 1987 Chevy G20 van replace power steering pump

Does your van have the serpentine belt? If so maybe I can help, I replaced the Power steering pump on my 90 G20 a couple of weeks ago. The trick is that you need to pull the pump pulley which is pressed on to access the mounting bolts which attach the pump to the engine. Harbor Freight tools sells a great tool designed for this job for $20.00. Once you have the correct tools, remove the serpentine drive belt. You may also need to remove the fan shroud. the pump shaft looks like it has an allen socket in the center, but this is for use in the manufacturing process, and will not come out. Place the puller tool on the pulley following tthe instruction that come with the tool, and remove the pulley. loosen, but do not remove the nut on the high pressure hose connection. use a pair of **** pliers to cut and remove the crimp clamp on the low pressure hose. If your pump has the remote reservour loosen the clamp on the reservour hose also. Remove the three mounting bolts, place a large pan under the pump to catch drips, and remove the prevously loosened hoses. there will be fluid leaking all over and the pump should come free, There are two types of replacement pump sold. With and without reservour. This reservour is a metal cover that fits over the back of the pump, and should not be confused with the reomte revervour found on some newer models which is next to the battery. This reservour is held in place be two throught the pump bolts which are removed at the back of the pump. If your new pump has a reservour you will probably still need to remove these bolts and put them in the replacement pump as most are shiped without these bolts. If you replacement pump comes without a reservour pull the bolts, the reservour should pull off of the old pump and slide onto the new one. check the o rings and replace the through the pump bolts. Installation is the reverse of removal execpt that 1/2" hose clamps replace the crimp clamps on the low pressure hose, and the puller tool is set up differently to replace the pulley. Finally if you don't flush contaminants out of the system your repair will last maybe a week. www.cardone.com has a great article about power steering flushing, read it before you start Good luck.

Posted on May 15, 2008

Ad
  • 611 Answers

SOURCE: Serpentine Belt chevy g20

hardest part is to remember how to rout the belt theres a place u can put a 1/2 inch or 3/8 ratchet on the tensior to make the belt slide offf

Posted on Jun 13, 2008

  • 1 Answer

SOURCE: Electronic Control Module Installation 1994 G20 Chevy Van

I just had the same problem. If it is a regular van try under the driver seat in a plastic box. If it is a conversion van try in a pannel just behind driver seat on side of van wall behind a pannel that looks like a vent.

Posted on Apr 09, 2009

AUTODOC01
  • 216 Answers

SOURCE: 1993 chevy van g20 water pump replacement

you will need some fairly long wrenchs 15mm-16mm to get leverage on the spring loaded serp tesiner put a wrench on the pulley near the belt ? also loosen the 4 fan bolts on the water pump before you remove the belt ? ther are 7 fan shroud bolts you can split the fan shroud ? 2 bolts on the lower right and 2 on the left ? after you do this then you should be down to pulling off the fan and pulley just slides off ? then remove the 4 waterpump mounting boltss, scrape the old gaskets ? when this is done all you have left is to installthe fan studs from the old pump? you do this by screwing down 2 nuts on the stud then with 2 wrenchs lock the nuts together ? then unscrew the bottom nut ? keep doing that till all 4 are replaced? install the gaskets and add some silicone and reverse the process ? hope this helps repost thumbs up !!

Posted on Aug 29, 2009

GM Elec
  • 1000 Answers

SOURCE: 95 G20 Chevy van: ABS light stays on, pulls right when braking

You actually have two separate problems. The brake pull to the right is indicating the left side brake is not working properly. You will want to remove the left front wheel, collapse the caliper piston and make sure the caliper is floating freely on its mounts.
With the piston collapsed you should be able to slide the caliper inboard and outboard of the rotor. If not, you will want to remove the attachment pins, clean and lubricate the pins. If they are grooved or worn you will have to replace them.
The second issue of the ABS light is indicating the system has detected an electrical sensing or control problem. Take the vehicle to your local Auto Zone or Advance Auto and ask them to scan the vehicle for trouble codes. They will scan it for you at no charge.
Chances are you will find a wheel speed sensor problem at one of the wheels.
Write the codes down and respond back, we can start diagnosing the problem,
Good luck, let me know.
Regards,

Posted on Aug 31, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1993 chevy g20 van I have to shift my car in drive 2 to pass a gear are Rev the gas until it finish to the next gear


700R4 or 4L60 trans. Both the same. Time for a rebuild. The longer you drive it the more it will cost.

Feb 18, 2016 | Cars & Trucks

1 Answer

Where can I find a fuse block diagram for a 1994 chevy g20 van?


google fuse block diagram for a 1994 chevy g20 van, should pop right up

Jan 07, 2015 | Chevrolet Cars & Trucks

1 Answer

I have a 1994 chevy Van G20 series it will go in reverse and in low gears but wont shift


Check your E-break first, secondly check to make sure you have no errors kicking from the control unit (engine computer module) which may or may not trigger a check engine light. Moreover it could be several things. Since it's an automatic the drive train maybe damaged, controller unite could be damaged, the transmission could (and probably) is dying. I'd have a professional mechanic check it out.

Jul 31, 2014 | 1994 Chevrolet G20

1 Answer

1993 Chevy G20 5.7 K ATF change needed. ATF change needed. Whta fluid do i use that is OEM. I heard not to use the dextron. The last thing i want is for my van to "go into shock" after fluid...


who said dont use dextron is a ****** use dextron 3 its just a better quality then the dexttron 2 an i dont think they make dextron 1 anymore but u can go up in numbers and its fine just dont go down up in quality not down

Apr 20, 2011 | 1993 Chevrolet G20

1 Answer

My 1993 Chevy van won't shift pass 2nd gear


Rebuild the transmission. This is an issue with the TH700-R4 as well as the 4E60LE transmissions. Sorry but that is the only way.

Dec 30, 2010 | 1993 Chevrolet G20

1 Answer

How do I replace the rear transmission seal on a 1993 Chevy G20 van.


Hi ...first off remove drive shaft ....you will see 4 or five bolts just before the end of the transmission ...remove it to gain access to the rear seal ...pull straight out ...some times you will have to pry slowly to remove it ...then you will see in the shaft that the rear seal is in there ....push in and remove ....put the new seal in the reverse way

Jan 02, 2010 | 1995 Chevrolet G20

1 Answer

Will a 1993 chevy van G20 series trani w/OD fit in a 1984 chevy van G20 series w/out OD


93 is made to be mated to a fuel injected model with ecm that controls tranny,84 is still old school! best bet have old 1 rebuilt!

Apr 11, 2009 | 1984 Chevrolet Chevy

1 Answer

Belt change for 1995 chevy g20


there should be a diagram sticker under the hood . first thing check to make shure all accesories move freely no locked pullys that may have shot the belt to begin with

Apr 04, 2009 | 1993 Chevrolet G20

1 Answer

Serpentine Belt chevy g20


hardest part is to remember how to rout the belt theres a place u can put a 1/2 inch or 3/8 ratchet on the tensior to make the belt slide offf

Jun 09, 2008 | 1993 Chevrolet G20

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...